|
|
Design of a 3D scanner for educational purposes
Paprsek, Adam ; Maxa, Jiří (referee) ; Vyroubal, Petr (advisor)
The aim of the submitted semestral project is research of 3D scanning object methods. The 3D scans utilization and types of these scans have been mentioned in the first chapter. The scanners are grouped into two basic methods – contact and contactless. The second chapter is dedicated to 3D model measurement principles, which are described in detail in four sub-chapters. In the following chapter is described design with complete realization 3D scanner with the implementation of the application for its controlling. Last part of the thesis concerns the 3D model editing and method evaluating.
|
|
| |
|
|
Electronic instrument for environment monitoring during plants growing
Žák, Jaromír ; Kuchta, Radek (referee) ; Hubálek, Jaromír (advisor)
The main goal of this project is to make electronic instrument for monitoring environment during plants growing for Mendel University of Agriculture and Forestry in Brno. The new device will replace current analog recorder of temperature and humidity. New device will be extended by measuring atmospheric pressure, illumination and CO2 concentration. Main advantage of electronic measuring is better lucidity of gained values. New concept allows easier comparison new values with earlier measured data.
|
|
|
Design of measuring solutions for circuits with differential signals
Jemelík, Lukáš ; Hanák, Pavel (referee) ; Jeřábek, Jan (advisor)
This master´s thesis deals about a measuring structures of elements working at a current mode. There were outlined structures for measuring input and output impedance. These structures were simulated for DACA element. It deals with a voltage to current and current to voltage converters. All structures and converters were simulated at computer program PSpice. Selected variant were practically verified and control measuring was realized.
|
|
|
Performance Evaluation of Graphics Accelerator
Vanek, Juraj ; Jošth, Radovan (referee) ; Herout, Adam (advisor)
This paper deals with possibilities and functions of modern graphic accelerators and with measuring performance under OpenGL interface. Widespread algorithms to render scene in real-time are used. It focuses on how to test every part of accelerator's graphic pipeline as well as measure performance in rendering of advanced effects and theoretical speed at general purpose calculations through graphic processor. This testing is realized by implementing multiple test series and their further evaluation. Final application enables setting of test parameters and outputs a score, by which is possible to judge accelerator's performance in comparison among themselves.
|
|
|
Three dimensional force sensor
Černý, Hynek ; Krejčí, Petr (referee) ; Houfek, Lubomír (advisor)
The bachelor’s thesis dealt with the design of a force sensor, which was supposed to do measurements of forces in three axes independently. The another required output of the work was creation of drawings. The design and optimalization of shape and dimensions of the sensor was made mainly in program called ANSYS. An important part of the work was the expression of final relations for the calculation of forces both analytically using simple elastic strength and the numerical finite element method. The last part of the work was an experimental measurement, which was supposed to verify accuracy of both methods for forces expression and also correct functionality of the sensor.
|
|
|
Narrowband data transmission over the power lines
Valenta, Jaroslav ; Mišurec, Jiří (referee) ; Mlýnek, Petr (advisor)
This bachelor´s thesis is focused on narrowband data transmission over power lines. At first are described possibilities of narrowband data transmission over power lines, next the type of noises and then thesis deals with parameters of communication channel. In this thesis are described too modulation, error corection and data encryption for reliable communication. In the last part of thesis are realized practical measuring in laboratory workplace. The influence of data communication on primary function of power lines are tested. In the end are realized measuring of noise influence on data communication.
|
|
|
A fuse heating measurement using IR camera
Belák, Michal ; Valenta, Jiří (referee) ; Aubrecht, Vladimír (advisor)
Bachelor's thesis deals with various principles of contactless temperature measuring and comparison of these principles. Different kinds of detectors, which are used in pyrometers and thermovision systems are presented, together with description of various kinds of the contactless thermometers, their division according to many different criteria. Next it is intended on the description of thermovision exploitation in different areas of practice. An example of practical fuse heating measuring and its analysis is also presented.
|
|
|
A new manufacturing technology for an automotive part
Kotrsal, Miloš ; Polzer, Aleš (referee) ; Píška, Miroslav (advisor)
The thesis is about analyzing a current technological process. It also includes describing a current production machines, tools and methods of measuring. The problems of milling procedure are described in a detail. In addition, there are descriptions of a technology of the production, methods of using production preparations, and methods of measuring gained results. There is designed an innovative solution of a new technological production. A history of the stoba Precizní Technika Inc. is summarized there. A comparison of the two versions is described in a techno-economic evaluation part, which is about comparing of mechanical time. A solution of the thesis is realized in a medium-sized production company during particular conditions. Limited conditions of the thesis are influenced by the conditions of the selected company.
|
|
|
Panel meassurement device
Vaško, Pavel ; Kaczmarczyk, Václav (referee) ; Bradáč, Zdeněk (advisor)
The master thesis includes a literature search, which is focused on questions around panel measure instruments for measuring analog voltage signals. There is the block diagram and the concept of measuring voltage values designed from collected information and defined requirements to the device. In the next step a design of the circuit diagram is created and published and consequently transferred into PCB. The whole board has been fabricated, assembled and tested. The firmware development starts with the definition of basic functional blocks for using of internal elements of the device, which is followed by the implementation of the Modbus slave station service routine. The top part presents graphical user interface on the device.
|
guest ::
