|
|
Model ranges analysis of pneu tyred rollers
Doleček, Ladislav ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor´s thesis is study of building machines pneu tyred rollers. The thesis describes basic knowledges of compaction materials. The thesis contains technological, technical and operating parameters of pneu tyred rollers and overall analysis of particular types of pneu tyred rollers from different producers by weight categories of rollers.
|
|
|
Trade house in Hodonin - solution of ceiling phase
Šrámek, Pavel ; Hanzelková, Martina (referee) ; Novotný, Michal (advisor)
The aim of this work is to prepare technology project for the construction phase of new ceiling of trade house. The ceiling is made up of the 1.PP and above the elevator shaft monolithic reinforced concrete structures, and over 1.NP and 2.NP it consists of prestressed precast panels with the casting of Spiroll. The work documents are necessary, with the implementation of this phase. In particular, the technological specification, budget, schedule, design of mechanical assembly, inspection and test plan, a description of the site facilities, and documentation to the assembly formwork.
|
|
|
Compactibility of the materials for subgrade
Kolbábek, Jiří ; Varaus, Michal (referee) ; Stehlík, Dušan (advisor)
This thesis is focused on differences between compaction of fine-grained and coarse-grained soils. It presents selected compaction methods and it describes their principles and implementation procedures. In the practical part is performed classification of both types of soils and then samples are compacted by three methods. The result of this work is to compare the effects of compaction on fine-grained and coarse-grained soil.
|
|
|
Přehled využití počítačových modelů pro simulaci utužení zemědělské půdy
KOTOUČEK, Petr
This bachelor thesis deals with types of simulation software which could be used to study the behavior of soil under load and describes the process of creating models and simulations. The introductory chapter focuses on the soil's characteristics. The following chapter provides an overview of selected software, brief definitions of how they work, and how to work with them. They are generally divided into three categories. Programs with the finite element method solver, applications with the pseudo-continuous Söhne model, and software based on separate particle models such as the discrete element method
|
|
|
Construction technological project of sports hall construction
Tkáč, Jiří ; Vlčková, Jitka Laura (referee) ; Diaz, Yvetta (advisor)
The thesis deals with Komenského Street sports hall construction in Lysá nad Labem. Although partially dealing with construction of all parts, in detail it studies gym construction, focusing on time management, technology and resources of implementation. The thesis is divided into the drawing and text parts. The former includes site facilities design and building situation. The latter consists of the main part construction project implementation study, itemized budget, time schedule, technological regulations, inspection and testing plan for the implementation of the main construction part 1st floor reinforced concrete columns and walls, construction machines and mechanisms design as well as time and financial schedule.
|
|
|
Design of Light Tandem Roller
Paška, Tomáš ; John, David (referee) ; Rubínová, Dana (advisor)
The master thesis deals with the design of a light tandem roller with an electric drive. The final design of the machine is designed in regard to the knowledge from design and technical analysis and the shortcomings of current rollers. The purpose of this work is to design a tandem roller which will respect the ergonomic requirements of the operator.
|
|
|
Měření vertikálního zatížení pod jednotlivými nápravami traktorů s připojenou nesenou technikou
ŠÁLENÝ, Miroslav
This bachelor thesis solves problems of vertical load under each tractor's axle with attached mounted agricultural technology. The aim of this work is to describe the impact of modern agricultural machinery and its impact on the agglomeration of agricultural land and the reasons for the penetration. Then it describes the methods that limit soil mitigation. In the practical part, several load measurements of tractors with agricultural support technology were carried out under the front and rear axles. Then the calculations reckoned the weight acting on one square centimeter. The results of the measurements were evaluated at the end of the work.
|
|
|
Porovnání orebné a bezorebné technologie zpracování půdy z hlediska jejího zhutnění
MACH, Václav
The bachelor thesis focuses on technologies of soil cultivation which are nowadays most frequently used in our country and what is their influence in soil compaction. It describes reasons of the origins of soil compaction, impacts of the compaction and the effect of compaction on soil as a unit. It also focuses on procedure? against unwanted compaction or its following elimination. Subsequently, the thesis describes basic work operations which are plowing and aeration. There are details of the principle how the plough works, basic types of ploughs and the way how we can divide plowing. There are also methods of plowing which are applied in different conditions on land. Last but not least, the thesis points out advantages and disadvantages of this most common soil cultivation. It deals with technologies of aeration as well as it deals with machines which are able to cultivate soil or with technologies of soil cultivation and their advantages and disadvantages in work without a plough. The field experiment which has been done for drawing up of this bachelor thesis focuses on comparison of ploughing and non-ploughing technologies of soil cultivation in a way of its compaction. There is evaluation of the penetrometric resistance, of the achieved depth in measurement and the soil moisture. These values have been measured on a field which was divided according to the technology of soil cultivation. The first part was done conventionally with the plough and in the second part the plough was replaced with the aeration. The results of the measurement were then compared with the whole soil profile of the measurement, then in the depth of 20 cm and finally with rest the horizon of measurement. Values and comparisons of the individual measurements are for better illustration noted in tables and marked on graph.
|
|
|
Utužení půdy jako důsledek činnosti zemědělské techniky
MASOPUST, Jan
This diploma work is dealing with the issue of compacted arable land made by agricultural equipment, in the Czech Republic. The first part of the thesis introduces factors that causes the compacted soil. Then, we are looking at the ways how to prevent the compaction or, on the contrary, how the undesired compaction can be removed or at least minimalized. This is analyzed in detail according to factors that may influence the process of the land compaction, such as the actual weight of the agricultural equipment kit combination, the choice of the correct tires and the economy of plant growing.
|
|
|
Experimental testing of elasticity modulus for base layers of pavements
Kotas, Vojtěch ; Mondschein,, Petr (referee) ; Stehlík, Dušan (advisor)
The thesis is focused on experimental testing of resilient modulus Mr with triaxial test of chosen unbounded and bounded mixtures used in the sub-base layer of pavement. The reason of testing is to compare results with TP 170 – pavement construction guide containing commonly used values of resilient modulus Mr. Thesis should check if those values are correct and real. For classification of chosen materials there are used another tests like grain size distribution, compaction, California bearing ratio CBR for unbounded mixtures and compressive strength for cement-bounded mixtures.
|
guest ::
