|
| |
|
|
Prediction of cutting forces and powers when sawing with a circular saw
Skryja, Jan ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
This thesis deals with the cutting of steel thin-walled parts by slitting saw. Its subject is to study and test of cutting edges of slitting saws with a goal to reduce cutting forces to a minimum. The thesis is divided into the theoretical and practical part. In the theoretical part, existing knowledge about slitting saws and general cutting technology is analyzed. In the practical part testing of four slitting saws with different geometries of cutting edges during machining of chosen thin-walled part is performed. The performed measurements show that by the proper choice of the geometry of cutting edge, the cutting force can be reduced approximately by 30 %.
|
|
|
Force load of the cutting tools in milling
Vašíček, Jiří ; Sliwková, Petra (referee) ; Polzer, Aleš (advisor)
The thesis is focused on measuring the power equipment for milling. The theoretical part describes the method of measuring forces with a deeper focus on the individual meter. There is also the description of the characteristics of the milling process. Experimental part is focused on the proposal of experiment of the face milling, its implementation and subsequent evaluation.
|
|
|
Cutting force analysis when drilling with twist drill
Hon, Pavel ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
Theoretical part of this project contains basic characteristics of drilling technology, shows summary of drilling technologies and tools used for drilling, detailed description of twist drill, forces and loads analysis when drill, twist drill stress analysis. In experimental part of this project there are some investigations on twist drill geometry CZ001 made by company NASTROJE CZ, s.r.o. Cutting edge geometry and web thickness is measured on 3D scan of this drill and the results are compared to conventional products. Course of moment of cutting and course of thrust force is done by experiment where the recessed hole was drilled. Course of both loads is compared to long-term results on conventional drills. As application of the achieved results the cutting force position is calculated and stress and deformation analysis is performed.
|
|
|
Analysis of the flat surface grinding by using standard machines
Hanáček, Jan ; Dvořák, Jaromír (referee) ; Strejček, Jan (advisor)
In the first part of this thesis is discussed of the possibilities of surface grinding. There are described various methods for grinding and describe their characteristics. Furthermore, there is shown the marking of grinding wheels and is discussed of their composition and of calculating the cutting forces. In the second part of this thesis the experiment is performed. On the samples of various materials are monitored parameters of roughness after grinding, which is used by conventional grinding BPH 300 and horizontal lathe from company TDZ Turn.
|
|
|
Productive Machining of Titanium Alloys
Čejka, Libor ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
The aim of the thesis is to analyze the production costs and optimize cutting conditions for high-feed face milling of titanium alloy Ti6Al4V. In the experiment were changed cutting conditions, such as cutting speed vc and feed speed vf. During the experiment were checked cutting forces by dynamometr. Furthermore, surface roughness and tool wear is observed.
|
|
|
Effective milling of stainless steels using octagonal inserts
Kouřil, Petr ; Sedlák, Josef (referee) ; Zemčík, Oskar (advisor)
Thesis aims on efficient milling of stainless steels. Groups of these steels are characterized and their machinability is analyzed in theoretical part of this thesis. In the practical part of thesis were face milled stainless steels ČSN 17 240.4 a ČSN 17349.4. There are evaluated edge durability, roughness of surface, loading of total cutting force and effectiveness of test tools.
|
|
|
Optimization of Machining Parameters Abradable Sprayed used in the Aerospace Industry
Krajkovič, Pavel ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
This thesis is focused on machining of thermal spray coatings. Particularly on testing of machining parameters and their influence on different types of abradable coatings used in the aerospace industry. The aim of research work is to test the parameters, measure cutting forces by using a dynamometer and their impact on the quality of the machined surface. Determination of the optimal machining parameters for different types of coatings based on results of measurements and the evaluation of surface quality. There are also presented techniques of thermal spray application and methods of coating evaluation. Further it describes a method of measuring cutting forces by using the dynamometer and methods of surface quality evaluation.
|
|
|
Construction design of woodworking machinery
Doležal, Martin ; Pavlík, Jan (referee) ; Holub, Michal (advisor)
This thesis deals with designing woodworking piece of machinery for thicknessing technology, surfacing planer, cutting and mortising, which are combined by changeable adapters. Thesis cointains a survey of selected woodworking machinery and technologies. It also provides an overview of safety rules for manipulation with woodworking machines and also safety features the machinery must comprise. The technical evaluation is included.
|
|
|
Design of cutter head with Harmonic-Drive application
Tkadlec, Dušan ; Dosedla, Michal (referee) ; Holub, Michal (advisor)
This master´s work deal with design two axis cutter head with possible variants drive of axis. The part of this work is also technical– economics valuation of single variants, calculation torque and force from motor head and design taking head in two axis. Cutter head should be applicated to boring and cutting headstock given to type with posibility of adaptive exchenges spindle.
|
guest ::
