|
|
Assessing the Advantages of Buying a Housing Unit in Brno Kociánka and Sadová
Kotrla, Tomáš ; Priesterrath, Robert (referee) ; Hlavinková, Vítězslava (advisor)
The diploma thesis deals with the issue of sale/lease of an apartment in the Královo Pole district cadastral area of Sadová. The main objective of the work was to find out the selling/rental price of the apartment unit in the new building, available 2+kk with standard equipment in Sadová. The price calculation was performed according to statutory regulations, standards and coefficients. At the same time, the price and quality levels of the offered housing units in the surrounding Brno localities were monitored and compared. The secondary objectives of the diploma thesis were the analysis of the housing market in Brno and its description including the preferences for the selection of the housing unit. The market indices used were used for the valuation of the dwelling unit and the price of the land included in the dwelling unit was included in the resulting price. The award was made by cost and comparison method. Sales/ rental pricing calculations were verified through direct comparison and Grubbs test. The rental method used to measure sales/rentals was used to determine the usual rent. In the last chapter of the analytical section, an appropriate procedure for purchasing a new dwelling unit was proposed.
|
|
|
The Multipurpose Building in Opava
Gross, Petr ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The subject of this diploma thesis is the processing of design documentation for realization of the new-build multipurpose building in Opava. The building is designed on the grounds of a former dairy in the Krnovská street where the demolition of obsolete buildings passed off recently. Now are these areas designed to build up again. Designed object will function as a multipurpose building with the operation of a restaurant on the 1st floor, office spaces on the 2nd floor and dwelling units on the 3rd floor. Part of the first floor is a mass garage primarily intended for residents of dwelling units with a total of 9 parking places. It is designed eight dwelling units in total of which six are one-room flats and two are four-room flats. Plan shape of the building is rectangular. The londbearing structure of the building is a reinforced concrete prefabricated precast concrete frame founded on cast-in-place concreted pads. Infill walls are clay brick. The building is roofed with warm flat roof. Dominant features of the building are large glass areas in all floors, metal ventilated facade and loggias of dwelling units. The drawings are processed in AutoCAD programme.
|
|
|
Multifunctional house in Strakonice
Kolesa, Jiří ; Rozehnal, Miroslav (referee) ; Štěpánek, Ladislav (advisor)
The subject of this thesis is the design and project documentation of a new multifunctional house in Strakonice. The building has four floors, without basement, and is located on a slightly sloping land in the suburban part of the town of Strakonice. It is based on shallow foundations and covered with a flat roof. It is a transverse wall structural system, build with clay block masonry, with the semi-assembled ceiling structures of ceramic and concrete beams and inserts. It is conceived as a double-aisle layout. The ground floor of each wing consists of the establishment of shops and house facilities. The overground floors are designed as six residential units of varying size category. Both tracts have separate entrances to both the residential portion and to individual businesses. The building is designed from traditional building materials. In addition to the architectural construction and civil-engineering design, a part of this project is also a fire safety design and an assessment from the perspective of building physics.
|
|
|
TOWNHOUSE ON THE WATERFRONT IN PŘEROV
Křivinková, Tereza ; Klement, Miloš (referee) ; Pelčák, Petr (advisor)
Architectural and urban design is flowing from the structure of the buildings on Brabansko Street. Dwelling house with a commercial ground-floor and underground parking concur the mass of Sokol house. The house is moved 1m to the side of the street line in a lateral Malá Dlažka Street, which creates a possibility to have a wider pavement in the future. Architecturally, there is a clear diversity between public and private parts of the house. Upper floors are determinated for dwelling by a large horizontal stay loggie towards the street side and by unclosed balcony towards the court side. Both are placed along the length of the house and glassed as much as possible. The house is open to the view on the historic city and the river Bečva as well as to the inner garden. By contrast the ground floor is higher and fully glassed in a vertical direction. The corner situation is drawn out by a console of dwelling floors overlapping above the round part and further a bit above the pavement. Entrance to the dwelling part naturally attracts to enter the house and the court behind it. There is enough space to room a terrace, in a summer time, for a café placed inside the round shape on the ground floor. Commercial units are completely independent on the other functions. The house by its variability creates a possibility for a sustainable town house.
|
|
|
The municipal authority
Podhájecká, Klára ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
It is a new the municipal authority in Dlouhoňovice. Part of municipal authority is a garage for the fire truck, warehouse village garden equipment, commercial spaces and the second floor above ground units. The building is situated in the Pardubice region in the town called Dlouhoňovice, cadastral area Dlouhoňovice. The building consists of two aboveground floors. The rest of the building is covered with wooden trusses in the shape of a gabled roof. The building is designed from the structural system HELUZ.
|
|
|
Multifunctional building
Reif, Tomáš ; Pospíšil, Tomáš (referee) ; Pěnčík, Jan (advisor)
The thesis is a project of a multifunctional building in Olomouc. That is the detached house with a rectangular ground plan, one underground floor and four above-ground floors. In the basement there are public parking garages, an technical room and an engine room of the ventilation. On the first floor there is a cafe and a copy center and the separate entrance for owners of the residential units. There are nine separate residential units on the second to the fourth floor. The house is based on the monolithic footings. The vertical supporting structure are formed by the basement walls in a combination with the monolithic reinforced concrete columns. Horizontal supporting structure is designed from the ceiling panels SPIROLL. The building is covered with flat single-roof construction with a drainage inward disposition.
|
|
|
Multifunctional house Strelice
Ben Hamad, Alexander ; Tichomirov,, Vladimír (referee) ; Novotný, Miloslav (advisor)
Diploma thesis is focused on design and elaboration of detailed design of polyfunctional building by Střelice, Brno-venkov the parcel number5804/4 and 5804/5. Proposition of the object respects both commune plan and current street buildings. It‘s not supposed to create stress with its shape and size, but complete actual buildings. It has four elevated floors, one basement and flat roof. Building has commercial space, mass garage and flats, it‘s determinate for study purpose.
|
|
|
Multifunctional building
Tkadlec, Martin ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
This final thesis concerns the new building of mixed-use building in Zlin. It has two floors partly below ground level and two floors above ground. There are garages, cellar boxes and nonresidential spaces. There are offices and their hinterland and one flat in the 2nd floor. There are residental units in the 3rd and 4th floor. The building is designed in irregular shape. The roof is flat. There is the contact thermal insulation. There are designed gas boilers for heating. The supporting structure of the ceiling is monolithic concrete slab.
|
|
| |
|
|
Sanitation installation in an apartment building with commercial space
Valášek, Martin ; Vaščáková, Alena (referee) ; Vrána, Jakub (advisor)
This thesis describes the design of plumbing in an apartment building with commercial space in Ilava. The theoretical part is devoted to the design of the container hot drinking water and it´s possible alternatives. The work also focuses on possible solutions diploma work. Computational part of a project proposal contains sewage and rainwater drainage, water supply systems and connecting the building to the existing network hardware. It is a residential house, which is in part intended for commercial premises and the second part is intended for housing. The building has four floors and no basement.
|
guest ::
