National Repository of Grey Literature 1,065 records found  beginprevious1033 - 1042nextend  jump to record: Search took 0.01 seconds. 
Family house with an establishment
Hlaváček, Petr ; Píštěk, Rostislav (referee) ; Daněk, Lukáš (advisor)
The new family house without cellar, with garage and an establishment – hairdressing salon. The object is based on strip foundation. The footing bottom is in frost resistant depth. Construction system is in both ways. Vertical walls are made by cut bricks POROTHERM. The external cladding is replenished by thermal insulation plaster POROTHERM TO. Horizontal constructions are made by ceramic girders and insert POROTHERM. Stairway is made by reinforced concrete. Heating system is ensured by gas boiler.
Park of Culture Brno
Tesařová, Zuzana ; Fišer, Jiří (referee) ; Odvárka, Antonín (advisor) ; Petříček, Tomáš (advisor)
The goal of this project is to design a new cultural and social center in Brno on the Mikulasek Square, Starý Lískovec. The main idea of the project was not only to design a building that would perfectly serve its purpose, but it was also to create a lively enviroment to meet people and to spend the leisure time. It was not required to detract the green areas in this housing estate. So there was a park created on the new building’s roofs. This is how the omitted place got its character and use. There are two buildings designed under the ground level and a bridge that helps the continuity of the park. On the south side in front of the main entrances there is a space with outdoor stage and auditorium followed by a wide ramp that meanders between the two buildings. The ramp was situated to the center of the project in order not to set aside the invalids. In front of the buildings there is also an area called ‚park square‘ which is formed by an irregular grass surfaces and pathes that lead to a various directiones. This space was designed according to an analysis of the people’s movement in this area. There are trees planted and the pathes are lined with long wooden rectangular-shaped benches.
Multi-functional house, Brno, Horova
Hurta, Adam ; Jeneš, Rostislav (referee) ; Podroužková, Božena (advisor)
The bachelor thesis deals with the static design of selectet part od the structure multy-functional house in Brno. The building consist of o basement, three floors, attic and roof trusses. The supporting structure consists of a monolithic conrete slab and ceiling of the attic Miako. Vertical load-bearing elements are bulit form bricks Porotherm. Column under the girders in 1.NP is plain concrete. The elements under consideration is made drawings.
Cast-in-place underground pumping station
Tejkal, David ; Zich, Miloš (referee) ; Strnad, Jiří (advisor)
The aim of this work was to design a monolithic gas station. Construction was divided to 3 stages: base plate concreting, wall of the tank and slab. All these parts are connected together. Design was centered on all of these parts and problems during concreting and using were solved too. It also includes drawings.
By-pass duct at sewerage plant
Hyrš, Martin ; Růžička, Stanislav (referee) ; Strnad, Jiří (advisor)
Target of this work was to design reinforced concrete By-pass duct and by cross reinforced plate at sewerage plant in Loučná nad Desnou
Monolithic concrete building at sewerage plant
Klimeš, Petr ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
Bachelor's thesis deals with design of monolithic concrete construction with a timber roof truss for a device of sewerage plant. This construction consists of these elements- strip foundation, walls with lintels, slab and timber trusses. This thesis contains static analysis of the component parts and their drawing documentation.
Cast-in-place structure at sewerage plant
Hůrka, Jiří ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
The thesis is focused on the design and the assessment of horizontal supporting parts and concrete trough on the sewage pumping station in the Boskovice town. There are parts of thesis: technical report, static analysis, design documentation and visualizations. The technical report describes the proposed solution. Calculation of internal forces was performed by manual calculation and verified by the software RFEM. The design documentation consists of shape and reinforcements drawings of selected structural elements.
Reinforced slab bridge ovet the Trkmanka river
Hradilová, Kristýna ; Slánský, Bohuslav (referee) ; Koláček, Jan (advisor)
The subject of this bachelor‘s thesis is to design a bridge across the river Trkmanka in Velké Pavlovice. The bridge is located on a local road II. class. The calculation will be performed by the plate model computer program Scia Engineer. The bridge is reinforced concrete structure.
The assessment of existing industry hall structure
Hamrlík, Martin ; Chalabala, Jiří (referee) ; Klusáček, Ladislav (advisor)
The bachelor's thesis is focused on an assessment of existing industry hall structure of a rectangular floor plan. The supporting system design consists of a precast reinforced concrete skeleton. The aim of this work is to determine the structure of the expected loading of a new crane runway. The subjects of assesment are columns, girder of crane runway, short corbel and concrete foot. In other part of the project is designed reinforcement nonconforming elements. The work includes the development od structural analysis, drawing of hall structure and reinforcement drawings of reconstructed elements.
Analysis of reinforced concrete bridge
Řeháček, Jakub ; Panáček, Josef (referee) ; Zich, Miloš (advisor)
Bachelor´s thesis is concerned with state estimation of reinforced bridge. The bridge is used to transfer local road across the Svratka river. The bridge is designed as arched bridge with tie and down deck. Lenght of bridging is 24,8 m. Loads and state estimation are done according to Eurocode.

National Repository of Grey Literature : 1,065 records found   beginprevious1033 - 1042nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.