National Repository of Grey Literature 30 records found  previous10 - 19nextend  jump to record: Search took 0.01 seconds. 
Filament recycler for FDM 3D printers
Neuwirth, Karel ; Bayer, Robert (referee) ; Jaššo, Kamil (advisor)
The first part of the project is focused on various types of 3D printing technology, especially FDM technology, where is possibility of recycling printed material. Next is a description of the most used materials for printing by FMD technology and a description of the production of filament using screw extruders. Several devices were selected for recycling and production of filament from FDM printing, for which their technological procedure in recycling is described. Subsequently, the work deals with the design of a device for melting plastic using a screw extruding device, including the possibility of measuring and regulating the output. In the last part, according to the design, the device is assembled and tested.
Optimization of wall thickness for headlamp body
Prokeš, Radim ; Tomaj, Martin (referee) ; Kandus, Bohumil (advisor)
This project is concerned with the issue of the thickness optimalization of the wall thickness of the plascics headlamp housing by the simulation Moldflow analyse. There are mentioned the basic information about the plastic materials and their dividing over there. Furthermore the description of the injection process, the injection machines and the tools is included. The principles of the proposal and the construction of the plastics part is also mentioned here. In the application of the Moldflow Plastics Insight 6.0 there is provided the simulation of the melt moldflow for the proposed headlamp housing. Based on this analyse the proposal of the thickness reduction of the wall thickness of the headlamp housing is worked out with the aspect on the required qualities. It also contains the technoeconomic estimation of the benefit optimalization.
Production technology of mobile phone plastic cover
Heralt, Aleš ; Orel, Daniel (referee) ; Kandus, Bohumil (advisor)
The master´s thesis is focused on technology of injection plastics. The specified part is guard cover of mobile phone. The first part of thesis is focused on description of technology with priority on construction of form. The second part of thesis includes calculations of parameters, which are needed for production, along with techno-economic evaluation of selected construction design.
Production technology of plastic bracket bearings motor
Svoboda, Vladimír ; Odehnal, Petr (referee) ; Kandus, Bohumil (advisor)
The target of this dissertation is based on the specified shape of plastic part to develop search technology of plastic injection molds, to the technological design process and construction of injection molds, including the necessary calculations. The project includes a search and a practical sections. Based on information from a search section a suitable material was chosen, which became the basis for practical section. The practical section with basic technology calculation is complemented by filling simulation analysis and stress analysis of critical elements. A part of this dissertation is the set of the drawings.
Production technology of a plastic headlight panel in a car
Vrána, Petr ; Žák, Ladislav (referee) ; Kandus, Bohumil (advisor)
Diploma thesis which is developed for the master’s degree program (M2I – K Mechanical engineering) presents a proposal solution for production technology plastic car headlins parts from polymer material PBT GF30. Literature review summarizes the findings of thermoplastic injection technology and the structural design possibility of injection molds. The paper examined two variants of the running system, which are suitable for production of injection molding components. Finaly, after technical - economic assessment, we came to the conclusion that the better option is to use the hot runner system. In the practical part is the specified product modeled by the help of 3D software and the injection mold was designed. The design was implemented by CATIA V5 R20. For the design and manufacture of injection mold were used normality from MEUSBURGER. For the chosen alternative technology of production were made calculations and was selected injection molding machine Electron 75 – 300 from FERROMATIC.
Diaphragm Thermoplastic Press
Štindl, Martin ; Blecha, Petr (referee) ; Foller, Bronislav (advisor)
The basic of this work is the construction realization of membrane vacuum press, mark out for shaping thermoplastics by force of membrane. Specially designate for material Twintex. The work deals with the general conception and form this machines. Movement material in machine to the warm up parts and after it to moulding.
Filament recycler for FDM 3D printers
Neuwirth, Karel ; Bayer, Robert (referee) ; Jaššo, Kamil (advisor)
The first part of the project is focused on various types of 3D printing technology, especially FDM technology, where is possibility of recycling printed material. Next is a description of the most used materials for printing by FMD technology and a description of the production of filament using screw extruders. Several devices were selected for recycling and production of filament from FDM printing, for which their technological procedure in recycling is described. Subsequently, the work deals with the design of a device for melting plastic using a screw extruding device, including the possibility of measuring and regulating the output. In the last part, according to the design, the device is assembled and tested.
Abrazivní opotřebení termoplastů v zařízeních pro zpracování odpadních materiálů
Slabá, Monika
The thesis deals with abrasive wear of thermoplastics in waste processing equipment. The work describes properties of thermoplastics and abrasion. The extent of abrasion was determined using a unique research equipment called an abrazimeter. Part of the thesis assignment was also the design and construction of the measurement device. The experimental procedures of the thesis describe the measurement and analysis of an abrasive wear of selected materials, i.e., steel 11 373 and polyethylene UHMW from concrete-recycled material. The acquired data were continuously used for optimization of the methodological set up. The aim of this approach was to reproduce the conditions of the real operation. The weight loss of the UHMW polyethylene after 100 hours of operation was twice as high as that of steel 11 373. The measured data were evaluated and statistically processed. The output this thesis may serve as a basis for the further research.
Analysis of Thermoplastic Welded Joints
Procházka, Martin ; Kytýr, Jiří (referee) ; Gratza, Roman (advisor)
This thesis deals with analyses of thermoplastic welded joints. Experiments were performed, in which the not-welded specimens and specimens with cruciform welded joints were tested by tensile and three-point bending test. For these measurements, polypropylene and polyethylene specimens were used. Afterwards, the analyses of specimen models were made in the ANSYS programme. The results of the analyses were compared with figures of the analytic calculations and measurements.
Laser welding of plastics
Nováková, Eliška ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
The bachelor presents a brief characteristics of thermoplastics welding methods followed by a more detailed description of laser welding of thermoplastics, i.e. laser description, division and types. Then, conditions and parameters of welding are defined. The experimental part is focused namely on visual welding tests on a test sample. The sample consists of two types of material – pure polymethyl methacrylate and black polycarbonate – which are used in car headlamp production. For welding, a diode laser designed for thermoplastics welding was used. The main target of inspection were flaws that were visible on macroscopically enlarged images. The tested welds mostly showed porosity and air bubbles. Finally, an evaluation of the experiment is conducted.

National Repository of Grey Literature : 30 records found   previous10 - 19nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.