|
|
Design and analysis of reinforced concrete or masonry structures
Skočdopole, Jakub ; Švaříčková, Ivana (referee) ; Požár, Michal (advisor)
The bachelor's thesis deals with the static solution of the reinforced concrete ceiling slab and the inclined column of a 2-storey multi-storey building. The first part is devoted to the design of a point-supported plate, a cross-reinforced plate and an inclined column inclined by 15° from the vertical structure according to the limit state method. A spatial 3D model was created in the SCIA Engineer program, which was used to determine the internal forces in the structure. The correctness of the model results was verified by the sum of moments method. The second part deals with the study of the influence of the slope of the columns on the structure, when one row of columns in the 2nd floor was inclined and then the effect of this change on the structure and the static assessment were compared. Reference slopes chosen for the study: 0°; 15°; 30°; 50°, a partial spatial 3D model of the structure was created for each variant. The appendix of the bachelor's thesis is a detailed static calculation according to valid ČSN EN standards, drawing documentation and a study of the influence of the inclination of one row of columns on the reinforced concrete structure.
|
|
|
Apartment building
Filípková, Zuzana ; Zumr, David (referee) ; Brukner, Bohuslav (advisor)
The subject of the bachelor thesis is the design of a residential building with almost zero energy consumption in the municipality of Blansko. The building will be situated on a plot of land in the northern part of the town between the existing development of family houses on the area defined by the zoning plan as a buildable area. The building has four floors above ground and one underground floor. It is covered with a flat vegetated roof. In the basement of the apartment building and there is a collective garage and technical facilities. On the above-ground floors there are residential units with the size of 1+kk to 4+kk. Parking of cars is possible in addition to the mass garage on the parking spaces in front of the building. The main entrance to the building is located on the east side. The common areas include a vestibule, entrance hall and corridors, from which there is access to the individual residential units. All floors are connected by a staircase and a hydraulic lift. The structural system of the building is combined. It consists of perimeter load-bearing walls and an internal skeleton longitudinal system composed of columns and transoms. The horizontal structure consists of a reinforced concrete slab. The building is based on a foundation slab. The perimeter walls are contact insulated with ETICS system using basalt wool of 200mm thickness.
|
|
|
Strengthening study of a reinforced concrete plain girder
Jalůvková, Lucie ; Pinkas, Karel (referee) ; Svoboda, Adam (advisor)
The subject of my bachelor thesis is to analyze existing reinforced concrete plain girders according to the current standards with a variety of strengthening solutions. The roof girders are located in industrial building in Lanškroun in the Pardubice Region. Its original design dates back to 1998, therefore the roof girders were designed according to the standards valid at that time. The strengthening of the roof girders will be designed using additional external prestressing and composite reinforcement followed by verification of the ultimate limit state, serviceability limit state and fire resistance. A digital model for checking the calculation was created using software Scia Engineer. For the verification of the composite reinforcement software Sika CarboDur was used.
|
|
|
Arch pedestrian bridge over the road
Śmigová, Marie ; Nečas, Radim (referee) ; Koláček, Jan (advisor)
This work deal with the design of a footbridge over a four-lane expressway. At the place where the footbridge is going to be designed is a bedrock in a great depth. Two preliminary variants were created, from which was selected the variant of the arched footbridge. Arched footbridge is a self-anchored structure consisting of a supporting reinforced concrete arch and prestressed bridge desk. For this footbridge was elaborated a more detailed study, static calculation and drawing documentation.
|
|
|
Apartment building
Kramplová, Marie ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of the bachelor‘s thesis is the new construction of an apartment building, which is located east of the city center of Zlín, Příluky. The building has three floors above ground and has a partial basement. It is covered with a flat roof. Cellar boxes for individual apartments and technical facilities are designed in the underground floor. There are two apartments on each upper floor. The entrance to the building is from the west side, from where the access walkway comes. Parking for eight cars is provided inside the building. There are two parking spaces for the disabled outside the building. The structural system of the building is a wall made of Porotherm ceramic blocks. The horizontal supporting structure consists of a reinforced concrete slab. The construction is based on a basic waterproof reinforced concrete structure. The perimeter walls are contact-insulated with the ETICS system using facade polystyrene with a thickness of 200 mm.
|
|
|
Apartment building
Zápotočná, Jana ; Pilný, Ondřej (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is the development of project documentation for the construction of a residential building with almost zero energy consumption. The main objectives of this work include the design of the layout, construction, and material solutions. The building of the apartment building is a detached new building, which has one underground floor with garages. In total the building contains 6 studios and 20 apartment units. The fourth floor is partially stepped with access to the flat roof. The building is roofed with two types of flat roofs and one gable roof with 20° pitch. The new building is located in a relatively sloping terrain of the urban area Kňažia, Dolný Kubín, on the plot KN-C 2110/10, which allowed barrier-free access to the building from the garage and at the same time and through the main entrance located on the landing. The facade of the apartment building is designed as ETICS with white RAL 9016 plaster. In the places of loggias and balconies there is a brick facing and in the place of the staircase proposed ventilated facade with cladding with corrugated metal in RAL7016. The windows are designed as plastic, on the exterior side in anthracite RAL 7016 and on the interior side in grey RAL 9006. The residential building is based on a reinforced concrete slab foundation. The basement construction system is combined with perimeter reinforced concrete walls and internal load-bearing columns. In the above-ground floors it is already a transverse wall system, formed by reinforced concrete walls. The construction of the gable roof is made of wooden glued trusses with metal roofing. This bachelor thesis also deals with the assessment of the building in terms of fire safety, thermal engineering, acoustics, glazing and day lighting.
|
|
|
Center for seniors in Brno-Medlánky
Drápela, Jan ; Klimecký, Martin (referee) ; Gerö, Jiří (advisor)
The architectural study of the senior center in Brno-Medlánky builds upon the territorial study carried out in the previous semester as part of the subject NGA056 - Specialized Studio (ArA). The result of the territorial study was a proposal for a compact development that combines all the needs of the area, from housing, through public amenities, a church, transportation connections with a tram loop, sports hall, park, to a senior center. Within the architectural study, a project was developed to create a comprehensive senior center that meets current standards. The center offers a wide range of services and facilities, quality common areas, as well as privacy in individual rooms and corresponding adjacent outdoor spaces. The design of the center is based on compactness and linearity. The center consists of two main volumes, with the larger one oriented parallel to the adjacent road. The second volume is perpendicular to it and they are connected by a communication block. In the front part facing the main road, a smaller entrance courtyard is created oriented to the west, while on the eastern side there is a larger space with a park. This area is bordered by the center's buildings on two sides, as well as adjacent residential buildings and greenery separating it from existing development, offering a peaceful space for seniors. Both volumes are located above an underground parking lot, which also extends under the entrance area. The individual buildings are then divided according to the services provided and the type of care. The ground floor offers a variety of services, a café, and the main entrance to the building, creating an active meeting place for clients and the public. The center aims to create dignified contemporary spaces for clients' stay and their integration into the surroundings, providing them with a pleasant atmosphere and a sense of belonging to their new home.
|
|
|
Small apartment building
Bartoň, Vojtěch ; Bečkovský, David (referee) ; Vystrčil, Jan (advisor)
The subject of the bachelor's thesis is the processing of the design documentation for the construction of the apartment building. The building is located on the outskirts of the prštné města Zlín. The building is designed as a detached masonry building roofed with a flat green roof. The new apartment building has 3 above and 1 underground floors. There are 13 housing units of various sizes and layouts for a total of 30 people. The building is designed as a traditional masonry structure. The basement, ceiling structure and staircase are designed as monolithic reinforced concrete. The entire apartment building is equipped with the contact insulation system ETICS. The building was assessed for building physics and fire safety.
|
|
|
Structural design of the industrial building for increased loads
Landa, Tomáš ; Olšák, Martin (referee) ; Klusáček, Ladislav (advisor)
The bachelor thesis deals with the design of a ceiling structure for a load of 15 kN/m2. The design was prepared on the basis of the submitted documents. A preliminary design of the structure and its elements was developed for the given problem. The structural analysis was performed in SCIA Engeneer software system (including manual control by simplified method). The result of this bachelor thesis is a static calculation and design documentation of the designed structures.
|
|
|
Technological stage of the rough superstructure of an apartment building
Čečotka, Daniele ; Řihák, Pavel (referee) ; Kantová, Radka (advisor)
The subject of my bachelor's thesis was the development of selected parts of the technological project for building the Community Center in Třanovice. I specifically focused on the stage of the rough upper construction. The building's structure consists of load-bearing perimeter walls made of ceramic blocks and a semi-prefabricated ceiling structure. This thesis includes the design of transport routes, technological procedures, inspection and testing plans, the timeline for the selected part, an itemized budget for the selected part, and the proposal for machinery for this stage. The work also includes the site layout concept, including a technical report, a detailed bill of quantities for the masonry, and a list of materials for the described technological procedures. In the final part of the thesis, an alternative design for the ceiling structure is presented, along with a proposal for revising the project documentation according to modular coordination and selected construction details.
|
guest ::
