|
|
Biocrystallization as a new concept in development of piezoelectronics for use in biomaterials
Dobešová, Kateřina ; Plichta, Tomáš (referee) ; Sedláček, Petr (advisor)
This thesis focuses on biofilament methods and biocrystallization of bacterial cells producing polyhydroxyalkanoates, specifically the bacterium Cupriavidus necator H16. The main techniques used for cell orientation include spin-coating and acoustic waves. Biocrystallization was induced by temperature, osmotic, and acid stress. The degree of cell orientation was monitored by an atomic force microscope, and crystallization was determined by FTIR. Among other parameters, the thickness of the layers was evaluated using a profilometer. The amount of PHA in the bacterial cells was determined by gas chromatography. The preparation of crystalline ordered layers of biomaterials represents a route to piezoelectric biomaterials.
|
|
|
Involvement of vibrational spectroscopy in the in-situ analysis of PHA in bacterial biomass.
Kevélyová, Barbora ; Samek, Ota (referee) ; Sedláček, Petr (advisor)
The aim of this thesis was the study of polyhydroxyalkanoates in bacterial biomass using the ATR-FTIR method. Furthermore, the PCA method was chosen to evaluate the measured data and observe correlations or differences among the spectra of various biomass samples. The bacterial producents were Aneurinibacillus thermoaerophilus H1, AH30 and AFn2, Cupriavidus malaysiensis DSM 25816, DSM 19416 and DSM 19379 and three strains of Schlegelella thermodepolymerans M 15344, DSM 15264 and LMG 21645. Various heteropolymers with different monomer content and total PHA content were investigated. The monomers in the samples were 3-hydroxybutyrate, 4-hydroxybutyrate, 3-hydroxyvalerate, 4-hydroxyvalerate, 5-hydroxyvalerate and 4-hydroxyhexanoate. As the reference method for accurate quantitative and qualitative determination of polyhydroxyalkanoates in the samples, gas chromatography was performed. The spectra obtained by the FTIR method were compared and significant peaks related to the qualitative properties of PHA, namely monomer composition and crystallinity, were searched for. The PCA statistical method was successfully applied to the collected data from FTIR, with the help of which the qualitative differences between the samples were monitored. The most significant differences were observed in the presence of monomers 4-hydroxybutyrate and 4-hydroxyhexanoate, and they were related to the crystallinity of the samples. The analysis did not show potential for semi-quantitative determination of PHA in biomass. Differences between microorganisms were not observed. The procedure for evaluating FTIR spectra using PCA could in the future be used in the study of biomass containing various monomeric units, especially hydroxyvalerates in case of their higher content within the sample.
|
|
|
Characterization of surface and mechanical properties of microbial cells
Khýrová, Markéta ; Lukeš,, Jaroslav (referee) ; Plichta, Tomáš (advisor)
The subject of this diploma thesis is the characterization of bacterial strains capable of polyhydroxyalkanoates (PHA) production in terms of morphology and mechanical properties. With this aim, an atomic force microscope (AFM) was used together with a nanoindentation instrument to perform microcompression tests on selected microorganisms. The model bacterial strains, Cupriavidus necator and Rhodospirillum rubrum, were tested in their PHA-producing form and in their mutant non-producing variant, in order to study the effect of PHA amount on bacterial morphology and mechanical properties. In the experimental part of this work, the preparation of native bacterial samples for both techniques were first optimised. Glass substrates were treated with plasma and the cells were subsequently fixed with poly-L-lysine. In addition, sample preparation including fluorescent staining was optimized for the microcompression tests in order to easily detect cells and determine their size. Finally, the impact of different measurement parameters and mathematical models for calculating Young's modulus on the AFM data were evaluated. The results revealed the effect of PHA on bacterial cell morphology and showed that PHA producers exhibit higher Young´s modulus on average compared to their mutant. It was also shown experimentally that microcompression tests provide significantly higher Young's modulus values than those obtained by AFM.
|
|
|
Involvement of polyhydroxyalkanoates in stress response of bacteria during late stationary phase
Šuráňová, Zuzana ; Sedláček, Petr (referee) ; Obruča, Stanislav (advisor)
The aim of this work was to study the involvement of polyhydroxyalkanoates into stress response of bacteria in the late stationary phase. Bacteria Cupriavidus necator H16 (able to produce PHA) and bacteria Cupriavidus necator H16/PHB-4 (unable to produce PHA) were used for the experiment. In the theoretical part, the polyhydroxyalkanoates and a stress response of bacteria were reviewed. In the experimental part of the work, the involvement of polyhydroxyalkanoates into stress response of bacteria in the late stationary phase against selected stress factors was studied. A resistence against various stress conditions of bacteria was studied. During long term cultivations a culture viability as well as PHA distribution among bacterial populations were assessed by using flow cytometry and the PHA content in biomass was analyzed by gas chromatography with FID detector.. Based on the results obtained in this work, it was found that the PHA acumulating bacteria Cupriavidus necator H16 is capable to survive carbon substrate limitations better than the bacteria Cupriavidus necator H16/PHB. Further, Cupriavidus necator H16 also revealed higher resistence against various stress factors such as ethanol treatment and freezing.
|
|
|
Analytical centrifugation as a tool for characterization of microbial cells
Beránková, Barbora ; Müllerová, Lucie (referee) ; Obruča, Stanislav (advisor)
This bachelor thesis deals with the study of centrifugation potential of microorganisms depending on the cultivation conditions The experimental part focuses on the sedimentation velocity and the instability index of the studied microorganisms during growth, under temperature and salt stress, the influence of the medium composition on centrifugation and the effect of osmotic strength on halophilic microbe Haloferax mediterranei. The sedimentation velocity and the instability index are increasing with increasing amount of water present in the bacterial culture of Haloferax mediterranei. The presence and type of polyhydroxyalkanoate (PHA) play a role in the monitoring of growth of bacteria Cupriavidus necator H16, Cupriavidus necator PHB-4, Haloferax mediterranei, Burkholderia cepacia and Burkholderia sacchari at the rate of sedimentation and instability index. Bacteria Cupriavis necator H16 with the highest content of poly(3-hydroxybutyrate) present was the fastest sedimentating and most unstable of the bacteria studied. Bacteria Cupriavidus necator H16 and Cupriavidus necator PHB-4, exposed to temperature and salt stress, exhibited only a slight influence on the rate of sedimentation and instability under temperature stress. The sedimentation velocity and instability index decreased with saline stress with increasing concentration of NaCl solution in culture. When comparing the media composition to polyhydroxyalkanoate (PHA) producing bacteria, Cupriavidus necator H16 cultivated in the mineral medium demonstrated the lowest sedimentation velocity and instability index rates, but Cupriavidus necator PHB-4 reached the lowest sedimentation velocity and instability index when grown in Nutrient Broth medium. For yeast Saccharomyces cerevisiae, the choice of medium had only a slight effect on sedimentation velocity and instability index.
|
|
|
Utilization of vibrational spectroscopy for in-situ qualitative and quantitative analysis of polyhydroxyalkanoates in microbial biomass
Kevélyová, Barbora ; Enev, Vojtěch (referee) ; Sedláček, Petr (advisor)
The aim of this bachelor thesis was to evaluate the applicability of selected methods of vibrational spectroscopy for qualitative and quantitative analysis of biomass, which contains polyhydroxyalkanoates. Fourier-transform infrared spectroscopy, that uses attenuated total reflection technique (ATR-FTIR), was chosen for this experiment. Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) has been studied in Cupriavidus malaysiensis, Thermomonas hydrothermalis and Aneurinibacillus thermoaerophilus sp. H1. Data were obtained by evaluating the infrared spectra, which were then compared with the results of performed gas chromatography. Visual changes in the spectra were also observed along with crystallinity. No correlation was detected between the data obtained by gas chromatography and by the method ATR-FTIR in quantitative analysis. Thus, this method is not suitable for determining the content of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) in biomass in the set experiment and the bacteria used. On the other hand, the method was successfully used for in-situ qualitative analysis of copolymer in the samples of Aneurinibacillus thermoaerophilus sp. H1. The degree of data correlation was relatively high in the given experiment. With these findings, ATR-FTIR is a suitable analytical method for determining the monomer composition of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) in this strain. Comparison with the PHA producer Cupriavidus malaysiensis showed that this method is not universal for all types of microorganisms observed in this thesis.
|
|
|
Production of polyhydroxyalkanoates employing Haloferax mediterranei
Hlináková, Kristýna ; Kučera, Dan (referee) ; Obruča, Stanislav (advisor)
This bachelor thesis is focused on study of selected effects on production of both polyhydroxyalkanoates (PHA) and extracellular polysaccharides (EPS) by halophile Archae Haloferax mediterranei. Theoretical part deals with a brief characterization of biopolymers and provides overwiev of the relevant microbial producers. The experimental part is focused on selection of a suitable substrate, concentration of sodium chloride and glucose in culture medium for a optimal production of biopolymers. Effects of light and suitable cultivation temperature were studied as well. UV-VIS spectrophotometry and gravimetry were used for analysis of biomas content. The content of PHA was analysed by gas chromatography with FID detection. PHA produced by H. mediterranei is a copolymer P(3HB-co-3HV), 3HV content is about 10%. The mixture of glucose and glycerol proved to be the most suitable substrate for a production of PHA, with a content od 80,6% of PHA. Further, we investigated optimal concetration of NaCl, which was found at 200 g/l. Interestingly, microbial culture responded to various salt concertations by differences in pigment formation. Finally, the last parameter optimalized in this work was temperature of cultivation. The highest content of PHA was obtained at 37°C, but the culture was capable of PHA accumulation and growing also at 50°C.
|
|
|
Utilzation of physico-chemical analyses in study on microbial stress-response
Slaninová, Eva ; Pekař, Miloslav (referee) ; Sedláček, Petr (advisor)
This diploma thesis deals with the utilization of physico-chemical analysis in study on microbial stress–response. The main content of this work was to propose and optimize techniques and methods which are generally used in different industries. Two bacterial strains, Cupriavidus necator H16 and its mutant strain Cupriavidus necator PHB-4 producing polyhydroxyalkanoates (PHA) under certain conditions, were used as model microorganisms. Initially, microscopic teques such as transmission electron microscopy (TEM), cryo scanning electron microscopy (cryo SEM) and atomic force microscopy (AFM) were proposed and tested for the characteriozation of morphological differences of bacteria. Furthermore, viscoelastic properties of bacteria were determined and compared by the oscillatory tests of the rheology method considering another type of samples. Thermal analysis methods, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) in particular, focused on water transport and behavior of intracellular water influenced by presence of the granules of PHB in bacteria. The last technique, utilized in the study, was dynamic and electrophoretic light dispersion during pH changes for characterization of the surface properties of bacteria such as size, zeta potential and the isoelectric point.
|
|
|
Preparation and application particles from copolymer of P(3HB-co-4HB)
Ostanina, Kseniia ; Sedláček, Petr (referee) ; Obruča, Stanislav (advisor)
This bachelor thesis deals with preparation of particles from poly(3-hydroxybutyráte-co-4-hydroxybutyráte). Copolymer was dissolved in acetone and then the solution had been dosed into the anti-solvents. Acetone and anti-solvent are perfectly miscible. Theoretical part focuses on the properties of the copolymer, its production and potential use in medical applications. In the experimental part the copolymer was dripped into selected anti-solvents by syringe and pipette above and below the surface of anti-solvent. The following anti-solvent were chosen: water, methanol, dimethylsulfoxid (DMSO), 50 % acetone-water, 75% acetone-water, 50 % methanol-water, 75 % methanol-water mixtures. There were three copolymers used with different compositions of 4HB units (63 %, 87 % a 33 %). Copolymer composition was analyzed by gas chromatography. Copolymers were prepared by bacterial strain Aneurinibacillus sp. H1. Due to the results particles of size approximately 100-500 nm can be prepared by methods described in this work. The produced particles can be successfully used in medical applications.
|
|
|
Impact of PHA accumulation on stress resistance of bacteria against disinfection agents
Krupičková, Kristýna ; Fryšová, Eva (referee) ; Obruča, Stanislav (advisor)
This bachelor thesis deals with the influence of acumulation of PHA balancing on the resistence of bacteria against desinfecting means. Two bacterial strains, PHA accumulation Cupriavidus necator H16 and its mutant strain insoluble PHA synthase Cupriavidus necator PHB-4 were used as model microorganisms. These bacteria were exposed to three different concentration of three desinfecting means (etanol, savo and ajatin). The viability of bacteria by the action of disinfectants was determined by the plate method and by the flow cytometry. The influence of desinfecting means against bacteria was examined by the broth dilution method which rested in measurement of absorbance over time. Agar diffusion method was the last one technique use. The results show that PHA production positively aids cell defence against desinfectants because bacterial strain Cupriavidus necator H16 is more resistant than its mutant strain Cupriavidus necator PHB-4. Of the free selected disinfectants, ajatin is the most effective.
|
guest ::
