|
|
Design of support structures for parts made of Inconel 718
Kuhajdik, Matej ; Hutař, Pavel (oponent) ; Koutný, Daniel (vedoucí práce)
This master thesis deals by the design of support structures for the production of parts made of nickel superalloy IN718 using selective laser melting (SLM). The aim of this work is to design a support structure so that technological problems (excessive deformation of the part due to high residual stresses and insufficient heat dissipation) are eliminated and replace the use of massive volume support, which is inefficient in terms of design and production time, consumed material and postprocessing. Mechanical behaviour of residual stresses of built component, design points of selected support structures (perforated block with pins, BCCZ with perforated contour) and design recommendations were quantified by using thermo-mechanical simulations of production and series of experiments. The functional sample was tested by designing specific support structures for the turbine wheel with subsequent production. The support structure ensured safe, successful production without potential problems and met the requirement to minimize material consumption through effective large-scale perforation of the structure.
|
|
|
Experimental Stand for Determination of Turbocharger Lubricant Consumption
Kuhajdik, Matej ; Doman, Jozef (oponent) ; Novotný, Pavel (vedoucí práce)
This work solves the problem of lubricant consumption in the turbocharger and air blow–by from the compressor part of the turbocharger into the bearing housing. The chosen problem is solved by the design of the test mechanism that will be used in the technical experiment. The experiment provides analysis options for the GT35 turbocharger rotor seal. Part of the work is a complete drawing documentation of the test equipment, installation procedure and instructions for operating the equipment.
|
|
|
Design of support structures for parts made of Inconel 718
Kuhajdik, Matej ; Hutař, Pavel (oponent) ; Koutný, Daniel (vedoucí práce)
This master thesis deals by the design of support structures for the production of parts made of nickel superalloy IN718 using selective laser melting (SLM). The aim of this work is to design a support structure so that technological problems (excessive deformation of the part due to high residual stresses and insufficient heat dissipation) are eliminated and replace the use of massive volume support, which is inefficient in terms of design and production time, consumed material and postprocessing. Mechanical behaviour of residual stresses of built component, design points of selected support structures (perforated block with pins, BCCZ with perforated contour) and design recommendations were quantified by using thermo-mechanical simulations of production and series of experiments. The functional sample was tested by designing specific support structures for the turbine wheel with subsequent production. The support structure ensured safe, successful production without potential problems and met the requirement to minimize material consumption through effective large-scale perforation of the structure.
|
|
|
Experimental Stand for Determination of Turbocharger Lubricant Consumption
Kuhajdik, Matej ; Doman, Jozef (oponent) ; Novotný, Pavel (vedoucí práce)
This work solves the problem of lubricant consumption in the turbocharger and air blow–by from the compressor part of the turbocharger into the bearing housing. The chosen problem is solved by the design of the test mechanism that will be used in the technical experiment. The experiment provides analysis options for the GT35 turbocharger rotor seal. Part of the work is a complete drawing documentation of the test equipment, installation procedure and instructions for operating the equipment.
|
host ::
RSS.