|
|
Test of remanency in a sport damper in dependence on a material of magnetic circuit
Polášek, Jan ; Kubík, Michal (referee) ; Roupec, Jakub (advisor)
This bachelor’s thesis deals with testing of maximal magnetic induction, remanence and B-H curve of different kinds of steels and application of this knowledge when choosing materials for magnetic circuit of magnetorheological (MR) dampers. The introduction of the thesis is intended to analyse knowledge of magnetorheological fluids and magnetic characteristics of different kinds of materials. Another part of bachelor’s thesis deals with the choice of steels of different chemical composition, heat treatment of steel, testing and comparing with FEM results. The aim of the thesis is also to design a clamping device for testing of magnetic circuit and to describe used measuring instruments and measurement methodology too.
|
|
|
Design of MR clutch water cooling
Musil, Marek ; Strecker, Zbyněk (referee) ; Roupec, Jakub (advisor)
This paper describes the design and manufacture of water refrigeration for magneto clutch. MR clutch cooling problem was solved by designing of several variants of which was finally chosen the best. Model of water cooling was developed and subsequently made. The cooling is consolidated on a stator of MR clutch. Cooling completely surrounds the body of an MR clutch and thus achieves a high heat transfer between the cooling system and cooled. The proposal was developed with a view to good foldability, so its use is not complicated.
|
|
| |
|
|
Measurement of the length and volume stiffness of steel bellows
Valík, Michal ; Roupec, Jakub (referee) ; Mazůrek, Ivan (advisor)
This bachelor’s thesis deals with the experimental measurement of the length and volumetric stiffness of steel bellows. The first part is dedicated to the analysis of the utilisation of metal bellows connected to the mentioned theme. This part also deals with the actual knowledge of metal bellow’s stiffness characteristics. The second part contains descriptions of selected methods of the measurement process. The last part of this work focuses on the evaluation and analysis of measured data in order to gain the results of the length and volumetric stiffness of metal bellows.
|
|
|
Design of stand for magnetic seal testing
Švec, Jaroslav ; Komenda, Lukáš (referee) ; Roupec, Jakub (advisor)
This bachelor thesis deals with design and construction of mounting board of stand for magnetic seal testing and with control of mounted asynchronous motor using inverter. In this thesis was done analysis of ways of controlling three-phase asynchronous motor with inverter, analysis of sensors for measuring testing conditions and analysis of modular aluminium profile systems. There was created three conceptions of mounting board from which the most suitable was chosen to be built. From ways of control was chosen the most convenient way. The result of this thesis is stand for magnetic seal testing, using which will be possible to gain new knowledge of magnetic sealing and its future use.
|
|
|
Design of Low-Pressure Piston Rheometer
Lán, Radek ; Strecker, Zbyněk (referee) ; Roupec, Jakub (advisor)
This thesis is focused in design of Low-Pressure Piston Rheometer intended for experimental identifying of magneto-rheologic (MR) liquid properties at long-term load. MR liquid is briefly introduced in the initial part of the thesis. There follows a search related to way of liquids properties measurement and overview of MR dampers which are close to piston rheometers by their construction. MR dampers with through piston-rod have been emphasised. The second part of the thesis is focused on calculation of magnetic circuit of the rheometer throttle leak. The rheometer is designed in the last part of the thesis.
|
|
| |
|
|
Description and Evaluation of Fastener Torque Characteristics of Screw Connection
Větrovec, Ondřej ; Roupec, Jakub (referee) ; Brandejs, Jan (advisor)
This bachelor’s thesis deals with the description and evaluation of the torque characteristics of screw connection in plastic parts in headlight. The evaluation was compared with the same screws from three different suppliers. Compered was the course of torque when screwing. The work also includes analysis of the current state of knowledge in the use of plastics in the automotive industry and joining plastic parts. There is more emphasis on shaping joining screws.
|
|
|
Optimization of the existing construction of magnetorheological clutch
Bedřich, Miroslav ; Růžička, Bronislav (referee) ; Roupec, Jakub (advisor)
This work deals with the reconstruction of magnetorheological (MR) clutch. The extensive research on the use of magnetorheological technology in practice was developed in the first part. The function of MR dampers, MR brakes and MR clutches were described. Some parameters of MR clutches were listed and compared. The second part concentrates on construction modifications to improve some parameters of MR clutch. The experiments verifying improvement of operating parameters of MR clutch were carried out in the third part.
|
|
| |
guest ::
RSS feed.