|
|
Fuselage design of TL-4000 aircraft
Holiš, Michal ; Jebáček, Ivo (referee) ; Mališ, Michal (advisor)
Táto diplomová práca sa zaoberá návrhom kompozitového trupu štvormiestneho jednomotorového turistického letúnu TL-4000, ktorý spadá do kategórie CS-23 zo zameraním sa na zadnú časť. V tejto práci je vypracovaný návrh vnútornej konštrukcie s ohľadom na posádku a pasažierov. Z navrhnutej konštrukcie je vytvorený MKP model po ktorom nasleduje vypracovanie a vyhodnotenie skladby laminátových a sendvičových častí nosnej konštrukcie pomocou softvérov MSC.Patran/Nastran a ComPost pre vypočítané kombinácie vzdušného zaťaženia.
|
|
|
Damage tolerance analysis of wing to fuselage joint of L 410 NG airplane
Duchoň, Peter ; Mališ, Michal (referee) ; Augustin, Petr (advisor)
Master's thesis deals with the damage tolerance analysis of wing-to-fuselage joint of L 410 NG airplane. Thesis includes determination of the load distribution to the individual attachments of wing-to-fuselage joint, residual strength analysis and residual fatigue life analysis of the most loaded attachment lugs, calculation of fatigue crack growth curves in the attachment solids and inspection program proposal. This analysis was performed using FE model of the wing and central part of the fuselage and AFGROW software.
|
|
|
Tail units design of VUT 100 aircraft made out composite
Berka, Martin ; Cejpek, Jakub (referee) ; Mališ, Michal (advisor)
This Master´s thesis describes the design of composite horizontal tail of VUT 100 aircraft. Load calculation and selection of the critical load cases is performed. Internal structure of stabilizer and right elevator is designed. Construction materials are chosen and the structure of the composite materials is proposed. FEM models of stabilizer and the right elevator are created in MSC Patran system and consequently the strength test of the models for the selected load cases is executed using MSC Nastran software and COMPOST.
|
|
|
Fuselage and control system design of VUT 081 Kondor
Kalný, Jan ; Šplíchal, Jan (referee) ; Mališ, Michal (advisor)
This master’s thesis deals with VUT 081 Kondor composite fuselage design and control system layout design. Load computation and selection of critical load cases are made. Principal inner surfaces of the fuselage are designed with respect to basic ergonomic requirements of the crew. Construction materials are chosen and a layup of composite materials is performed. Fuselage FEM model is made in MSC Patran/Nastran system and the structure-strength analysis is given for chosen load cases.
|
|
|
Design of an aircraft for towing according to CS-VLA
Marek, Ondřej ; Urík, Tomáš (referee) ; Mališ, Michal (advisor)
The topic of the thesis is a design of an aicraft for towing of gliders. Based on the background research of the towing aircrafts currently used by the Czech aeroclubs and the analysis of the required characteristics of these aircrafts the design of the new airplane has been created. Moreover, the load of engine mount has been determined according to the CS-VLA directive (a certification guidelines for the Very-light aircrafts). Its construction design as well as strength calculation have been elaborated. The part of the thesis is a 3D model of the aircraft and the engine mount.
|
|
| |
|
|
Design of system model of L23 Blanik sailplane
Šenkýř, Miroslav ; Mališ, Michal (referee) ; Urík, Tomáš (advisor)
The aim of this diploma thesis is to create useful reference models of the glider L-23 Super Blaník and their use for framework proposal technology of production, which will improve accuracy and reduce labor intensity of production. The introduction of the thesis describes history of glider and historical overview of geometry transmission in terms of structure. The next chapter of the thesis deals with the description of reference models and rules of their creation. Section describing coordinate systems is closely linked with the previous chapter. Another section of thesis is dedicated to the importance of reference models in the product lifecycle. The creation and tuning of reference models of glider is described in the next chapter of thesis. The penultimate chapter deals with experiment, which allowed verification of reference model and product. The conclusion of the thesis describes proposed technology of production where used verified reference models and modern tools of CAD systems refine and facilitate production. The main objective in designing of reference models was the definition of high quality and usable surfaces. Also proposal technology of production was processed in order to ensure the improvement and simplification of manufacturing process.
|
|
| |
|
| |
|
|
Designe of a control system for powered sailplane SONG
Cejpek, Jakub ; Šplíchal, Jan (referee) ; Mališ, Michal (advisor)
The objective of this work is to adopt and further expand the type design of the SONG motor glider. The study will result in the basic aerodynamic calculation and the design of lateral control system including structural strength inspection of selected parts. Subsequently, the proposal will allow for further calculation to be made (of flight mechanics, wings strength or fuselage and empennage firmness) and for more specific constructional design of individual components of the glider.
|
guest ::
RSS feed.