|
|
Construction of comparison measuregauge for measurement of tools.
Brabenec, Petr ; Dočkal, Aleš (referee) ; Ždímal, Pavel (advisor)
This work is about construction of a comparison gauge to meausure revolving tools. The gauge measures cutting and clamping parts of standard and special reamers. The gauge is unique and is designed for a company manufacturing concerete. It was designed in accordance with requirements and a prototype was tested for functionality. There is made analysis, development, design, theoretic estimation and practical verification of accurancy.
|
|
|
Modernization of R-mat test stations
Papaj, Lukáš ; Dočkal, Aleš (referee) ; Mazal, Pavel (advisor)
The aim of the thesis is to reconstruct obsolete R-mat test stations, which are used for rolling contact fatigue tests of material, which are still of interest from industry. It was necessary to replace the original control electronics with a new industrial computer to allow use modern sensors and automate the entire test process. At the same time, the measurement was supplemented by an acoustic emission method, which can also record the development of damage. Design modifications have been made that allow the installation of all new sensors. The main method for evaluating the tests is vibrodiagnostics, which is supplemented by the acoustic emission method. With the help of several experiments, the shortcomings of the new control system were identified, some parameters were designed, and the main functionality of the modernized R-mat station was verified. According to the proposed parameters and the identified shortcomings, the control system was modified, and a script was created, which is used to evaluate the test. It is still possible to perform rolling contact fatigue tests of the material on the modernized equipment, and thanks to the modernization of the electronics, it is possible to test completely new methods of test evaluation.
|
|
|
Design automation of simple inject moulds for tool factory
Žváček, Michal ; Dočkal, Aleš (referee) ; Paloušek, David (advisor)
The dissertation is concerned with automatization proposal of simple injection moulds for plastics. The dissertation is concentrating on the process of CAD design with the aim of make it more effective and automate by the help of 3D parametric strickle board of moulds. It serves for rapid proposal of basic mechanism of the tools. Strickle board of the mould is managed by length of side moulding plate in required range from 300 to the 700mm. For managing of standardized parts was created web portal, which includes database of single parts. These parts can be simply insert to the groups of moulds by the help of hypertext links in software Catia V5. Dissertation includes description of whole system automatization and matching of the new way of CAD design with the original.
|
|
|
Experimental chamber for testing of special materials using SLM technology
Malý, Martin ; Dočkal, Aleš (referee) ; Koutný, Daniel (advisor)
The thesis deals with the influence of process temperature and pressure on 3D printing using Selective Laser Melting. The aim of the thesis is the design, manufacture and testing of the experimental chamber for SLM 280HL from company SLM Solutions. The main task of the experimental chamber is to increase the temperature of the preheating of the powder bed from the original 200 °C to at least at 400 °C. The device will be used to investigate the influence of high process temperature on the properties of printed materials. The thesis also deals with the design of the powder applicator for elevated temperatures.
|
|
|
Experimental Analysis of Kinematic Quantities on Cam Mechanism
Komenda, Lukáš ; Dočkal, Aleš (referee) ; Zimmerman, Martin (advisor)
This diploma thesis deals with creation of a laboratory task related with analysis of kinematic quantities on cam machanism. A new measuring chain was created as a part of the new laboratory task for analysis of kinematic quantities with use of sensors and signal processing by software LabVIEW. The concept of the laboratory task on a experimental machine was based on knowledge gained from Current State of Knowledge where basic principles of laboratory training and utilization of cam mechanisms in learning were described.
|
|
|
Design of magnetorheological clutch.
Nováček, Vladislav ; Dočkal, Aleš (referee) ; Roupec, Jakub (advisor)
This thesis deals with the design of the magnetorheological (MR) clutch. The extensive literature research with particular conclusions to each design variant of MR clutches or brakes has been done in the first part of the thesis. The second part of the thesis describes the design of the actual MR clutch based on the results of the analytical calculation of the magnetic circuit. Finally, the experiments verifying the function of the key segments of the clutch, and the whole clutch are summarized in the third part of the thesis.
|
|
|
Analysis of drive corned filler including feed worm and conveyer
Mahút, Tomáš ; Dočkal, Aleš (referee) ; Dvořáček, Jiří (advisor)
This final project solves a proposal of mechanism for splitting of unfilled cans before a can filling process in the food industry. From all possible options such as the one with a simple conception, easy applicated in practice and at a low price, should be chosen. The selected option is constructed and drawn in a 3D programme called AUTODESK Inventor 10. Please, see the attached technical drawings for the chosen parts.
|
|
|
Virtual model of resonance adhesion test (EUSAMA)
Hortová, Petra ; Dočkal, Aleš (referee) ; Mazůrek, Ivan (advisor)
Thesis deals with problems about areas of a non-assembling diagnostics namely resonant adhesive tester according to an EUSAMA methodology. Result of the methodology is a technical condition examination of dampers. However with regard to testing of whole suspension and damping vehicle system are results distorted by influence of testing conditons and another vehical components. Goal of thesis is analysis limits of practical use resonant adhesive tester for a quality checking of mount wheels damping. Problems are solved by a virtual simulation in a program Adams/View where is created a real model of vehical axle of Skoda Roomster TDI 1.4. In the model is consequently simulated possible functional characteristics and abrasions of single components which influence the methodology. Virtual model will be using for research activity of Institute of machine and industrial design Faculty of mechanical ingeneering Brno University of technology.
|
|
|
Design of 3D printer for high strength materials
Žlebek, Michal ; Dočkal, Aleš (referee) ; Koutný, Daniel (advisor)
Thesis deals with FDM 3D printing method and testing capabilities of optimum printing conditions for different materials. The aim of this work is to design and manufacture of experimental device that enables printing to investigate these conditions. A device designed in this work was named UK3DP and allows dual color object printing with maximum dimensions of the square base of 150 mm and a height of 150 mm. Before printing, the user can set almost all parameters affecting the printing process, including air temperature in heated chamber that is part of it. To verify the functionality several materials are tested, including ABS, PC and PEI. It also describes basic verification of the influence of selected parameters on the print result. Performs tensile tests confirming the influence of ambient temperature during printing on the quality of fiber connections, examines the final quality of the surface for each layer height and compares the resulting deformation of printed objects with other printers. The result of this work is a 3D printer capable of testing printing conditions for both existing and new types of materials with a range of user adjustable parameters.
|
|
| |
guest ::
