|
|
Design of audio power amplifier with Bluetooth connectivity
Bartoň, Jan ; Šotner, Roman (referee) ; Brančík, Lubomír (advisor)
This bachelor‘s thesis deals with the task of designing an audio amplifier, operating in class D, with a nominal output power of 2 x 80 W with Bluetooth connectivity, supplemented by an equalizer and a state display. A power supply and a user interface are designed as well. At first, research regarding audio amplifiers is made, followed by a more thorough description of class D operating principles. Afterwards the actual synthesis of the desired amplifier is presented, followed by the power supply design procedure. The correctness of the synthesis is later verified by simulations in PSpice and LTSpice. Theoretical design is then practically built, and its parameters are confronted with expected values by measurements.
|
|
|
Automated oscilloscope calibration
Krejz, Jan ; Bartoň, Jan (referee) ; Šedivá, Soňa (advisor)
The Bachelor thesis deals with the preparation and subsequent automated calibration of the Rhode&Schwarz RTB2002 oscilloscope using the Meatest 9010 calibrator. The first part brings a theoretical introduction to the environment of Caliber and the issue of calibration of oscilloscopes. The second part contains the preparation and design of the calibration procedure including its practical implementation and comparison of the results of the automated and manual calibration of the chosen oscilloscope.
|
|
|
Thermostat on LinkIt Smart Platform
Bartoň, Jan ; Šimek, Václav (referee) ; Vašíček, Zdeněk (advisor)
The bachelor thesis deals with the automation of heating regulation in the household. The goal is to design and implement a prototype of a embedded system to enable the automation of the heating control process with the emphasis on low acquisition costs. The proposed system is used to control the eQ-3 MAX! wireless radiator thermostats. The user interface of the system is the touch screen. As well as iOS mobile application that allow remote control of the system. A prototype of a Wi-Fi sensor is designed and implemented to measure temperature. The work includes hardware and software design of individual parts of the system and their implementation. The resulting system is a good basis for a low-cost system for comprehensive home automation.
|
|
|
Computer Network Design
Bartoň, Jan ; Kavan, Jiří (referee) ; Ondrák, Viktor (advisor)
The goal of this thesis is to analyze the current state of the customer's computer network and his requirements. Then the changes and the way of their realization were proposed. The next part of the thesis are the description of appropriate components, selected technologies and the detailed description of the implementation process, including blueprints.
|
|
|
Climatic tests - DC calibrator M160
Kozárek, Radek ; Bartoň, Jan (referee) ; Šedivá, Soňa (advisor)
This bachelor's thesis is about climate test of DC calibrator M160. In section of theory, there are described standard. Next topic is calibrator M160 and its technical parameters, design of climate conditions. Next it deal with program Caliber, which automate measurement. Practical part of this thesis is about measurement of data in climatic conditions. This data were processed and compared with data, which guarantee manufacturer on reference range. In conclusion there is evaluation if this data could be used for whole operating temperature.
|
|
|
Measurement of precise capacitance decade in environmental chamber
Schinneck, Jakub ; Bartoň, Jan (referee) ; Havlíková, Marie (advisor)
This bachelor’s thesis deals with the control capacitance decade in a climatic chamber. The theoretical part introduces a capacitance decade M525 of the MEATEST company and the program Caliber of the same company. It introduces the methods of capacitance measurement. In the bachelor’s thesis there is the calculation of the uncertainty of measuring devices. On the basis of the lowest uncertainty, we choose the most suitable measuring device. The practical part describes the measuring with the use of prepared procedure for verification of the capacitance of programmable decade. The last part contains the evaluation of the measurement results and their comparison with the manufacturer's specifications.
|
|
|
Optimization of voltage amplifier
Malík, Luděk ; Bartoň, Jan (referee) ; Šedivá, Soňa (advisor)
This bachelor thesis concerns the simulation and optimisation of a voltage amplifier as a part of a multifunctional calibrator 9010, which has been recently introduced by Meatest s.r.o. company. The simulation is executed with LTspice software. LTspice itself and the basics of its usage are also described in this thesis. Furthermore, this thesis contains the theoretical analysis of used components and their connetions. The thesis also depicts the schematics of the above mentioned voltage amplifier supplied by the Meatest s.r.o. company. The thesis contains measurements of selected properties of the voltage amplifier from the 9010 calibrator and their comparison with the results of the simulation. The optimisation concerns these selected properties and compares them to the original qualities of the calibrator 9010 voltage amplifier.
|
|
|
Entrepreneurial Project
Bartoň, Jan ; Novák, Zdeněk (referee) ; Rompotl, Jaroslav (advisor)
The theoretical part of this master’s thesis introduces to the reader problems of production management tools, and optimization of the manufacturing process. It explains basic concepts, principles and methods that has aim to clarify systems and methods used in the practical part to the reader. The practical part describes the implementation of these methods and optimization of specific part of the manufacturing process. The result of optimization is evaluated from the perspective of time and finance.
|
|
|
System Proposal for the Use of Low-potential Heat
Kučera, Roman ; Bartoň, Jan (referee) ; Mastný, Petr (advisor)
This bachelor thesis deals with the problematics of a low-potential heat from the energetics point of view. It also deals with the sources and subsequent use of the low-potential heat. First of all, the thesis mentions the origin of these sources and also describes where they can be found. Also the technologies, that are able to utilize this heat, like heat pumps and solar collectors, are mentioned in this part of the thesis. In its next part, the bachelor thesis deals with use of the waste heat for heating and production of electrical energy. In the last part, the thesis presents the project that introduces a specific concept of the system for object heating from the waste heat.
|
|
|
Process Calibrator M143 - Climatic Testing
Dojava, Václav ; Bartoň, Jan (referee) ; Havlíková, Marie (advisor)
Subject of the bachelor thesis are the climatic testing of the M143 calibrator. Theoretical section of the thesis is concerned with the analysis and description of the norms used during climatic tests of electronic devices. Thesis then continues by describing properties and functions of the M143 calibrator and the Caliber programme, which is performing automated measurement during the climatic tests, on the basis of the designed calibration procedure. Practical section of the thesis describes the designed testing points and climatic conditions, which are adjusted during the testing. In this section the testing points are implemented to the Caliber programme. Last section contains the analysis and evaluation of the measured data gained during the climatic testing. From these measured data, we are to determine, whether the M143 calibrator is within the specifications stated by the manufacturer in different climatic conditions.
|
guest ::
RSS feed.