|
|
Library
Brňák, Martin ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The main subject of this masters‘s thesis is the project of the library in Kroměříž. The object contains basement, ground floor, two above-ground floors and is covered with the flat roof. The library is dispositionally divided into several parts. The basement is meant to be the technical background of the object. The Cafe and the library with the book rental are designed to take place on the ground floor. On the second and third floors are situated the studing rooms and the offices for staff. The construction is designed by monolithic reinforced concrete constuction in a 5x5 m module based on piles. Perimeter surface is partly made of glazed and ventilated facade. The most dominant feature of this building is the hanging glazed facade on the southern and northern side. Infill mansory is projected by the Therm system. This work contains project documentation of the construction including studies and visualisations
|
|
|
Health Center
Kalenda, Lukáš ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of this master´s thesis is the preparation of selected parts of the project documentation for the construction of the health centre. The building is designed as nearly zero energy building. The aim is to design a suitable layout that meets the requirements for the operation of a small-scale health centre without an inpatient area. It is also necessary to select a suitable structural and material solution. The building is situated in a gap in an existing terraced development on a flat site. The building consists of three floors above ground and one underground floor. The foundation of the building is made up of plain and reinforced concrete foundations in combination with reinforced concrete footings in place of columns. The vertical load-bearing structures are made of therm ceramic blocks, which are supplemented by reinforced concrete columns inside the layout. In the case of the perimeter masonry, the construction is supplemented by a contact insulation system and a ventilated facade with cladding made of metal cassettes. The horizontal load-bearing structures are made of reinforced concrete monolithic slabs. Flat vegetated roofs are designed over the lower parts of the building. The uppermost roof plane is designed as a double-skin roof with a stacked concrete tile covering. In the basement area of the building there is a technical background, while it is possible to further subdivide these spaces and use part of them as a warehouse or filing cabinet. On the first floor there are 3 commercial premises usable for example as a pharmacy, optics and beauty salon. On the second floor there are a total of 5 surgeries with a common waiting room and 1 dispensary. There is also 1 commercial space usable as a massage studio. On the third floor there are 2 dental surgeries with a common X-ray room and one dental hygiene surgery. The layout of all floors also includes sanitary facilities divided for staff and visitors. The thesis includes an assessment of the proposed building in terms of building physics (thermal technology, acoustics and daylighting) and fire safety.
|
|
|
Rehabilitation Center
Štrbáková, Adela ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The diploma thesis deals with the new construction of a rehabilitation center in the center of Púchov. The goal of the work was to develop project documentation for the implementation of the construction. The building is designed on parcels no. 49/37, 49/38, 49/68, the land is flat and there are no buildings on it. The building has two above-ground and one underground floors. The perimeter supporting structures on the above-ground floors are designed from the Porotherm system. In the basement, the perimeter load-bearing walls are solved with monolithic reinforced concrete walls. The ceiling structures in the building are designed as monolithic reinforced concrete ceiling slabs and prestressed Spiroll ceiling parts. 250mm.. The building is covered with a single-layer flat vegetation roof with a slope of 3%. The building has a rehabilitation facility on the first above-ground floor. On the second above-ground floor there is an administration and a cafe. In addition, the building has a technical room, warehouses and staff locker rooms in the underground floor.
|
|
|
Car service
Novotný, Patrik ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The car service is in the cadastral territory of Kumburský újezd of the city Nová Paka. The building has 2 above-ground floors and one underground. On the first above-ground floor, there are spaces for commercial purposes, such as a showroom. Furthermore, here we will also find the work area of the workshop, where work on the cars will take place. On the second above-ground floor are the office spaces for the management of the company. The vertical load-bearing structures are made of sand-lime blocks, and prestressed concrete panels are used for the ceiling structures. The roof structure is made of counter-top wooden trusses. The building has designed foundation made of plain concrete.
|
|
|
A leisure center
Istvánová, Martina ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of my master’s thesis is creating a part of a design documentation for constructing a Leisure center with nearly zero energy consumption. The Leisure center is designed as a building with two above-ground floors and a basement. It is a newly-build public building with educational purposes. The building is designated for leisure time education activities for children and youth and organizing various cultural events such as exhibitions and theatre plays. There is a coffee shop on the first above ground. In the basement of the building is a mass garage for 10 vehicles, technical utilities of the building and a storage space. From the construction side the building is designed as a cast-in-place concrete frame with reinforced concrete columns and beams and mainly with cast-in-place reinforced slabs. A part of the building’s ceiling is designed as prefabricated reinforced prestressed concrete floor slab.
|
|
|
Apartment building
Maršálková, Martina ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
This bachelor thesis processes the project documentation for the apartment building with a nearly zero energy consumption. The project of an apartment building is located in the city of Liberec, city district of Vesec and has four above-ground floors and one underground floor. The foundation of the apartment building is located in a slightly sloped terrain overlooking Ještěd and the neighborhood consists of family houses and apartment buildings. The main intention was to design comfortable, spacious and modern living space with low energy costs. The layout of apartments is suitable for families with children or for a young couple. None of the housing units are designed as barrier-free for people with limited mobility, but access to the building is wheelchair accessible and, if necessary, apartments can be changed to meet the requirements for barrier-free standards. In the basement of the building there are common areas including the gym and separate garage parking spots. Parking will be available even outside of the building, located from both sides of the building. The elementary materials used for the construction are brick and concrete from which the supporting structures of the building are made. The roof and part of the front of the building is designed to include vegetation.
|
|
|
Apartment building
Kalenda, Lukáš ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of this bachelor thesis is the preparation of a selected part of the project documentation for the construction of an apartment building. The aim is to design a suitable layout solution that meets the requirements of modern living. It is necessary to choose a suitable design and material sulution. The apartment is set in a slightly sloping terrain. The building consists of 4 floors and basement. The building is based on foundation strips made of concrete. The vertical load-bearing structures are made of ceramic masonry, in the case of perimeter masonry, the load-bearing structure is supplemented by a contact thermal insulation system. Horizontal load-bearing structures are formed by semi-assembled ceramic ceilings. Roof is designed as a green roof. In the basement of the building there are 5 separate garages, utility room, workroom, carriage house and cellar. In the above-ground part of the building there are 9 housing units of a various layouts and sizes. Part of the bachelor´s thesis is also the assessment of the building in terms of building physics (thermal engineering, acoustics, sunlight and daylight) and also in terms of fire safety.
|
|
|
Apartment building
Štrbáková, Adela ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The bachelor's thesis deals with the new construction of an apartment building on the outskirts of the village Dohňany. The aim of the work was to develop project documentation for the construction. The building is designed on plot no. 842/2, which is slightly sloping. The apartment building has four above-ground and one underground floor. Perimeter load-bearing structures are designed from the Ytong system in the above-ground floors. In the basement, the perimeter load-bearing walls are solved by a combination of a reinforced concrete wall and a Ytong block. The ceiling structures in the building are designed as semi-assembled from the Ytong system. The building is covered with a single-skin flat vegetation roof with a slope of 3%. There are 9 residential units and one studio designed in the building. Housing units come in a variety of sizes and layouts. In addition, the building in the basement has a utility room, cellar, carriage house, cleaning room and four underground garages for cars.
|
|
|
Apartment building
Staněk, Matěj ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of the bachelor's thesis is the elaboration of project documentation for the construction of an apartment building in Hradec Králové on U parku street. It is a building with four above-ground and one underground floor. The vertical load-bearing structures are made of Porotherm clay blocks, the horizontal load-bearing structures are made of MIAKO clay floor blocks, placed on ceramic-concrete ceiling joist and filled with concrete. In the basement there are garages for six cars and storage space. There are eleven residential units on the upper floors. The roof is designed as warm flat roof with growing layer.
|
|
|
Apartment building
Novotný, Patrik ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
This apartment house is located on a slightly steep hillside in the area brno-sadová. The building is composed of 4 above-ground floors and 1 underground floor, including total 13 apartments and 1 basement. Most of the apartments are one room + kitchen corner. The apartment house is designed as a combined wall construction system with a dominant cross walls setup, which is consisted of chalk-sand breeze blocks and the assembled-parts ceiling. The apartment house has a wall footing made of a simple concrete. Due to the the impervious soil presence on the whole land, the drainage system was built around the whole place. There is a single layer, vegetational flat roofing on the building, which among other things serves as a recreative zone for residents living in the fourth above-ground floor.
|
guest ::
RSS feed.