|
|
Realization of digital oscilloscope
Kulig, Tomáš ; Michal, Vratislav (referee) ; Frýza, Tomáš (advisor)
This work is focused to digital handheld oscilloscope. Input circuits are solved by analog devices. DSP (Texas Instruments company) will be used for fast processing of signals from output A/D convertors. LCD display with touch screen is used for interaction with user. The result will be fully functional device. It would measure voltage waveforms within the scope from tens mV to tens V with transmission bandwith from direct-current signal up to tens of MHz
|
|
| |
|
|
Design and realization of wireless interface ODBII-XBee
Zatloukal, Martin ; Frýza, Tomáš (referee) ; Prokopec, Jan (advisor)
This master’s thesis describes possibilities of usage of ZigBee communication protocol and integrated circuit ELM 327 in problem of realization universal diagnostic device, running by OBDII communication standards, which can be used to monitor function of all car´s electronic systems. Thesis also deals with design and realization of necessary electro technical devices and modules followed by compilation of control software and experimental measurements of these devices in real traffic flow. In the first part of project, there are reminded some basic features and parameters of OBDII, followed by description of ways how to use OBDII and adumbrating how to realize universal diagnostic system. The analysis of ZigBee system focused on XBee circuits follows. Construction, ways of data transfer and possibilities of controlling are described. Integrated circuits produced by ELM Electronics Company are introduced and possibilities of usage ELM 327 are described as requested by main task. Second part talks about designing of electronic circuits of this system, assembling schematic diagram and designing sources for production of PCB. Physical realization of these circuits and its first start is also included. Thesis finishes by dealing with practical experiences and measurements using real vehicles. This part talks also about means to improve system by several software solutions to reach more effective functioning of created device.
|
|
| |
|
|
Universal switch for security systems
T.Kovács, Matúš ; Fedra, Zbyněk (referee) ; Frýza, Tomáš (advisor)
The aim of this work is to discuss the topic of a secure technology device using an electronic securing system and a camera system. The device is using four cameras, from which each is connected to a motion detector. The device is designed so it allows the recognition of a possible failure to the analyzer, damage or arcing fault of the guidance, the switch of the video signal within the vertical blanking interval, or a malfunction of the SMS sending from a GSM modem. Important parts of the device are the VIDEO MUX, which provides the signal from the camera to the screen, and the PIR HANDLER which detects the states of the PIR detector. The work of these peripheries is monitored by the ATmega128 microcontroller.
|
|
|
Wireless security device
Nejedlý, Tomáš ; Prokopec, Jan (referee) ; Frýza, Tomáš (advisor)
This project deals with design and study wireless security device. This device works in ISM band, created by two modules handling secure subject. Microprocessor AVR from company Atmel provides communication between these modules.
|
|
|
Multiparameter circulating pump driver
Pazour, Zbyněk ; Frýza, Tomáš (referee) ; Kratochvíl, Tomáš (advisor)
This master’s thesis deals with design of the regulation of a circulating pump in a solar system for heating of supply water and design of the regulator for this system. It describes a fundamental principle and layout of a regulated circuit of a heating system. Description of regulation, basic terms, properties and differences between different types of regulation are described in first part of the master’s project. Especially continuous (PID regulator) and discrete (PSD regulator) regulation are presented. Second part of the master’s project is focused on a conceptual design of the circulating pump regulator. The connection system of each part, selection conditions of components and connection scheme of regulator are described. The third section deals with design of controlling algorithm of the regulator. There is a detailed description of libraries and functions in each chapter which were used in programming of PSD regulator algorithm. The regulated system of a solar collector is described at the end of the work. This system is being developed for real testing and setting of regulator.
|
|
|
Development board with 32-bit ARM-based processor
Jůn, Lukáš ; Šebesta, Jiří (referee) ; Frýza, Tomáš (advisor)
The content of this thesis is to create a detailed description of 32-bit ARM-based processors. Reader will be inform about the each one of the family of ARM-based processor, about the options of creating applications for these CPUs. The Applications are commonly developed by using the C/C++ language. This text also deal's with the development environments. These tools are making easier the development of new applications. This thesis also contains a complete design and description of development board with Atmel AT91SAM7S64 MCU (with sample of source code included).
|
|
|
Expertimental GSM jammer
Charvát, Jiří ; Prokopec, Jan (referee) ; Frýza, Tomáš (advisor)
This thesis describes GSM communication, the method of its jamming and design of a jammer for this band. This document is mainly focused on design of the jammer with the variable bandwidth of jamming and the variable level of output power. Requested parameters of jamming are set by a control panel with a LCD display. In this document there is a detailed description of each function block and connection between them. At the end of this thesis there are released measured results of designed jammer.
|
|
|
Communication & Man-Machine Interface for industrial sensors
Marcoň, Petr ; Fedra, Zbyněk (referee) ; Frýza, Tomáš (advisor)
This thesis describes the possibilities of local and remote sensors configuration. Summary overview of the most common Fieldbus and protocols for remote configuration is performed. The focus is mainly dedicated to the HART protocol that is analyzed from the physical layer to the application layer. Circuit diagram and printed circuit board (PCB) of smart sensor with thermistor probe Pt1000 was designed. The HART protocol allows the smart sensor parameters setting as well. The functionality of remote configuration was tested in HARTWinConf program. The control elements for local sensor configuration, such as buttons, matrix keyboards and touchscreens, are described in the following chapter. Representation of the measurement values on display module is introduced too. The most important parameters and aspect of character LCD, graphics LCD and OLED displays are described in greater details. The DD12864YO-3A OLED display was selected to use with designed temperature smart sensor module. The display shows the loop current, the percentage of current range and the primary value - temperature. As the last step the EMI and EMS tests for all modules were performed.
|
guest ::
RSS feed.