|
|
The timber roof structure of the hotel in Velké Karlovice
Smečková, Veronika ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
The aim of my thesis is to assess the roofing design of the mountain hotel, situated on the Great Karlovic, at an altitude of 512 metres above sea level. The height of the structure is 12.0m whilst the base is 12x24m. The first floor is constructed using brick, whilst the second floor and the attic is designed as a timber structure. The roof truss structure has a traditional framework of that time period.
|
|
|
The roof structure of the industrial hall in Kyjov
Nosková, Nela ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
The Bachelor´s thesis describes design and static assessment of the main roof structure supporting elements of the roof structure of the industrial hall in Kyjov. The hall is designed from timber. The aisle is rectangular floor plan 17,0 x 40,0 m. The main bearing structure causes as a frame truss supported by columns. Solid frame is made from solid timber C24. Purlin is designed from solid timber C24. The static calculation also includes fire resistance reports of single elements. Static analysis has been accomplished by student version of the SCIA Engineer 2012 software.
|
|
|
Steel Structure of Footbal Grandstand
Kloss, Tomáš ; Pilgr, Milan (referee) ; Hron, Lukáš (advisor)
The aim of this bachelor´s thesis is to design and check the football grandstand roof construction with ground plan dimensions of 30 x 105 m and a height of 20.5 m. Climatic loading is determinated for the location of the construction site - Ostrava. The resulting structural system was chosen spatially co-composed of trusses, purlins trusses, transverse and longitudinal stiffeners, columns and struts. The shape of the roof, which commemorates the air wing, is creating difficult conditions for wrapping air currents. Parts of the work are: technical report, structural analysis of the main structural elements and selected connections and drawings. The computational model for determination of internal forces is implemented in Scia Engineer. The review is created manually according to valid European standards.
|
|
|
Bonded Warehouse in Uherský Brod
Šotkovský, Jakub ; Hron, Lukáš (referee) ; Pilgr, Milan (advisor)
The subject of my bachelor’s thesis was to design and assess a steel structure warehouse in Uherský Brod. It is a single hall with a gabled roof with a ground plan dimensions of 30 x 42 m and a height of 8 m. The slope of the roof plane is 7.595 °. The main load-bearing structural system consists of eight cross-frame links. The hall is claded by sandwich insulation panels Kingspan. The whole steel structure is made of steel S 235.
|
|
|
Exhibition Pavilion in Třinec
Toman, Tomáš ; Barnat, Jan (referee) ; Pilgr, Milan (advisor)
Bachelor thesis deals with the design of load carrying steel structure of Exhibition pavilion in Třinec. Pavilion is of rectangular shape with dimensions 36 x 42 m , and the main load carrying structure in the transverse direction is double pinned parabolic arch, with height of 15 m. Lateral stability is achieved by bracing systems, and stability in the transverse direction, is achieved by the arch itself. The whole design is done according to relevant ČSN EN standards.
|
|
|
Garage with Fuel Station
Borkesz, Michael ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
Bachelor thesis presents the structural design of a load bearing steel structure of garage with roof construction of adjoining fuel station. The object is located in periphery area of Uherske Hradiste city, near Jarosov district. The ground plan dimensions are: 36 x 32 meters garage hall; 20 x 20 meters fuel station roofing. Heights of both construction tops are same – 10 meters above the surface. As the main material supporting elements was designed steel S355. The main supporting structure compose of trusses, which are hinged supported by columns. The roof deck is heat insulated, supported by purlins. The wall deck is simillar to roof deck, except of the front wall, which is partly composed of glass casing. At the both sides of garage hall are designed gates for vehicles. The roof deck of fuel station roof construction composes from one single trapezoidal sheet, also supported by purlins. The work contains structural design of individual elements, including mutual joints and anchoring. Calculations are performed according to standards of EN.
|
|
|
Steel structure of an industrial building
Blaška, Jan ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
The bachelor thesis is about designing the single-aisle industrial hall bearing structure. The width of the hall is 18 meters, the length is 63 meters and height of the holder of a crane track girder is 12,3 meters. There are two trolley cranes in the building. Their carry capacities are 20/5 t and 32/8 tons. The main bearing components are the transversal restrained columns and strut-frame stringers. The purlins are strut-frame. The structure is designed for the district of Blansko.
|
|
|
Sports building in Soběšovice
Fojtík, Petr ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
In my work I deal with design and assessment of the supporting structure sports hall with dimensions 30x45 m and a height of 15,5 m. Hall is designed as a truss structure formed by cross-links, which are axially located 9 m. Roof is like a saddle with a slope of 5.71 °. Cladding hall is made sandwich insulation panels.
|
|
|
Steel structure of store building
Ďureje, Andrej ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
Content of this thesis is design of the steel construction of warehouse and his static assessment. The construction of the hall is designed as double-aisled. Ground plan dimensions of the hall are 50 x 60 m. Construction is formed by planar cross-linking. Tentative design of the construction is solved in two variants, which are compared on the basis of the size of paint surface and weight. The winning variant of the construction includes the complete static analysis of supporting elements, solving of connections, details and drawing documentation.
|
|
|
Steel Structure of Sports Hall
Uhl, Milan ; Pilgr, Milan (referee) ; Hron, Lukáš (advisor)
The goal of this work is to design a steel structure of a sports hall, which will be used for roofing of three tennis courts. The main structure of roofing is made of lattice trusses, which are parabolic curved so they make cylindrical surface. Building height is 12 meters because of requirements on this object. The ground plan size of the hall is 40 x 60 metres. The structure is designed to satisfy not only the functionality, but as well aesthetic and economic requirements.
|
guest ::
