|
|
Sports building in Soběšovice
Fojtík, Petr ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
In my work I deal with design and assessment of the supporting structure sports hall with dimensions 30x45 m and a height of 15,5 m. Hall is designed as a truss structure formed by cross-links, which are axially located 9 m. Roof is like a saddle with a slope of 5.71 °. Cladding hall is made sandwich insulation panels.
|
|
|
Planetarium in Brno
Revayová, Veronika ; Pilgr, Milan (referee) ; Pešek, Ondřej (advisor)
The design of several variants of the structure of the planetarium in Brno is the subject of the diploma thesis . The building has a ground plan size of 30x30 meters. The main supporting material is S235 steel. The bearing structure of the object consists of columns, joists and beams. The bearing structure of the dome consists of a spatial structure, which is formed as a half-globe above the diameter of 18 meters. 3 versions of this dome have been processed. The resulting design is Geodetic Dome. Part of the work is an assessment of the main structural elements and selected details. The Scia engineer 2016 version 16.1.3033 was used to calculate internal forces.
|
|
|
Shopping gallery
Lorenc, Jakub ; Barnat, Jan (referee) ; Pilgr, Milan (advisor)
The subject of this diploma thesis is the design and assessment of main load-bearing elements od the steel structure of shopping gallery in Hodonín. Part of floor plan is rectangular and rest of it is half-circled. Object's dimensions are 7é m x 147,75 m (and roof overhang 1,5 m on each side), the height of the ridge is 13,43 m and the height of the roof's dome is 22,70 m. It's a two-storey building. The load-bearing structure consist of pin-suported columns, in this case there is max. 8,5 m distance between them in direction of main frame. The distance between main frames is 9 m. The spatial rigidity of the structure is ensured with floor slabs and system of bracings. The cladding consists of sandwich panels, roof's fanlights and dome of glazed areas. Most of elements are made of S355 steel.
|
|
|
The Reconstruction of a Stell Structure two-storey Building.
Rapant, Jaromír ; Pilgr, Milan (referee) ; Buchta, Stanislav (advisor)
his thesis deals with exploration of paper mill building, structural load, and assessment of current load bearing structure and proposing reconstruction. Bearing structure is entirely made out of steel and it’s done as XYZ frame. The building is located in Olsany u Sumperka, this defines the climate. The paper mill is of a platform of 54,0 x 48,25 m. It’s a two floor building with average height of 13,22m. Thesis contains foto documentation of the building and tests of strength of the steel in the bearing structure. Small statistical calculation was done, of all current elements of the steel structure. And necessary reconstruction was based on these calculations.
|
|
|
Velodrom
Horký, Rostislav ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
Diploma thesis deals with desing and static assessment of supporting steel roof structure of velodrom. Climatic load is determined for location of city Znojmo. The thesis consists of technical report with comparison of 2 options solution, technical report of chosen variant, static report of main supporting parts and chosen connections, bill of materials quantities and drawing documentation. Computational model for evaluation of internal forces is realized in SCIA ENGINEER 17.01 software. Static report is created manually according to valid European standards.
|
|
|
Multifunctional Pavilion
Dvouletý, Martin ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
The subject of the diploma thesi is the design and assessment of the pavilions supporting structure for exhibition and other purposes. The building is located close to Zlin. Preliminary designs of supporting structure were created. One of these was selected and detaileddesigned and assessed. Generallythere are two structures that are extended between themselves. A design and assessment of the entrance portal for the exhibition pavilion was created. The entrance portal is an atypical structure that was created from a combination of hyperboloid and cylinder. The entire portal is formed of welded parts and it is completely from glass. The entrance portal has a variable height, where the highest point is 8,258m. The entrance portal is 20,394m long and has a variable width, where the largest width is 12,000m. The exhibition hall, which is located behind the entrance portal was designed from flat arched truss trusses. The arched trusses are made of several radii and hasa overall impression of an elliptical truss. The trusses have a range 37,000m and they are axially distant 6,000m. The height of the arched trusses is 10.530m. In the leading position of the construction were designed pillars and construction for possible connection of the entrance portal, or for the location of the gate system. Whole construction of the exhibition pavilion, without the entry portal, is 54,000m long and 37,000m wide. The built-up area of both structures is approximately 2200m2. Construction are designed according to normative requirements of CSN EN for limit state of load capacity and usability. The main material of the supporting structural parts was used S355JR steel.
|
|
|
Bus Repair Station in Uherské Hradiště
Líšková, Jana ; Sýkora, Karel (referee) ; Pilgr, Milan (advisor)
The bachelor´s thesis is focused on the design of steel load-carrying structure of a single-storey building in Uherské Hradiště. The purpose of the building is Bus Repair Station. Dimension´s plan of structure are 32 x 64 m and the height of the building is 11.5 m. The main load-carrying structure is made by a shaped truss girder with 5% by distance 12,680 m. The design model was created by Dlubal RFEM 5.06. The design was made with regard to the required reliability and economy according to valid standards.
|
|
|
Shopping Gallery
Žák, Ondřej ; Hron, Lukáš (referee) ; Pilgr, Milan (advisor)
Master's thesis addresses the design and assessment of the load bearing structure of the shopping gallery. The building is designed as a three-storey rectangular plan with a flat roof. The structure is composed of steel frames and composite steel and concrete slabs. There are proposed two possible solutions - variant with a flat roof and direct central gallery, a reinforced rigid steel frames and a variant with a cupola roofed circular inner atrium, solidified with rods.
|
|
|
The Steel Structure of a Hangar
Růžičková, Markéta ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
The purpose of this dissertation is to take into consideration the design and the steel structure assessment of the hangar for small propeller aircraft type Cessna. The platform dimensions are 40,0 by 60,0 metres. Headroom is around 10,0 metres. The object’s location is in Brno. The main structural material is steel S355J2. There are two initial geometric alternatives, in other words structural modifications of desired solution. These are spatial truss arc tie beam and garland tie beam. The two alternatives were tentatively designed according to their dimensions and the main supporting elements of both alternatives were also assessed and considered. The alternatives were finally evaluated and one option was selected for detailed processing. In turn of the chosen option, there had been drawing of detailed analysis of the main load bearing parts of the construction with joints and some other details included. Furthermore there is drawing documentation and supervisor’s technical report attached. The valid standards CSN EN were used in processing of this dissertation.
|
|
|
The Multipurpose Sport Hall
Makiš, Daniel ; Pilgr, Milan (referee) ; Buchta, Stanislav (advisor)
The content of this bachelor thesis is design and report the steel roof structure of multipurpose sport hall. The building is located near the city Olomouc. Load-bearing system is made of arch shaped truss girders. The dimensions of the floor plan are 50 x 80 m with the height of the building 10,26 m. There are detailed structural report and drawing made. ČSN EN standards were used for this design and report.
|
guest ::
