|
|
Heating of the administrative building
Kadlček, Ondřej ; Vendlová, Lucie (referee) ; Počinková, Marcela (advisor)
The objective of the bachelor´s thesis is a office building. The theoretical part deals with the distribution of hot water heaters, according to various criteria and their connection within the heating system. In the calculation part, a detailed design of the heating of the building is made. Air-to-water heat pumps are designed as a heat source. The building is heated by panel radiators, floor convectors and floor heating. Forced ventilation is provided by air handling units. The preparation of hot water is solved by preferential heating. The project part contains a technical report and drawing documentation.
|
|
|
Systems of energy efficient buildings
Šlampová, Kateřina ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
The topic of this diploma thesis is systems of energy efficient buildings with a focus on the building envelope. The first theoretical part describes the quantities that we consider when designing the building envelope. The second half of the theoretical part is with reference to the experimental part of the thesis focused on a special type of vertical perimeter structure, namely walls with live vegetation installed from the outside of the structure. The second, practical part of this work, deals with the design of heating and hot water supply for a multifunctional building. The design is elaborated in two variants - heating by means of radiators in the first variant and in the second variant by means of floor heating for residential units of the solved building. The third part define an experiment, which had the task of comparing the measured quantities on two types of vertical perimeter structures, namely a structure with growing greenery from the outside and an identical structure only without a layer of greenery. At the same time, the task was to check the possible influence of the applied greenery on heat losses, and thus the design of the heating system.
|
|
|
Heating System of Libraries
Dlabajová, Pavlína ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
This study presents the structure of the heating system in the library of Masaryk University of Science with the address Kotlarska 267/2, 611 37 Brno. In particular, this study will examine the calculations of the heating output, proposals for sources of the heating output, preparation of the hot water, heating surfaces and the proposal for the hot water for the hydraulic piping. Additionally, the author will conduct an evaluation of the dimensions as well as a hydraulic assessment of the pipeline, the design of the pumps, and lastly the safefy equipment.
|
|
|
Heating systems in buildings with low energy consumption for heating
Juráček, Martin ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
This work is processed like a proposal of heating for a part of seminar centre in Hostětín names Veronika. This current object is built in passive standard. In a part of building there is heating which it is suggested with help by singletube heating system. There is intake of air by recuperator without heating or cooling of air. Heat source is boiler room functional on renewable. Target of this work is analyze of current singletube heating system and find out cause it´s incompletely functionality. Further, design a new heating system which it suppose to be singletube and doubletube heating system.
|
|
|
Design of heating system of wooden apartment building
Rušín, Marek ; Počinková, Marcela (referee) ; Horká, Lucie (advisor)
The aim of this bachelor thesis design of heating system and hot water preparation for timber structure of an apartment building in Choceň. The building is divided into two separate objects, both of them have three floors. The heating system consist of a steel panel radiators and towel rail radiators . The source of heat consists of two gas condensing boilers connected to a cascade. The theoretical part deals with measuring of consumpted heat for heating system and hot water preparation.
|
|
|
Energy-efficient building
Somogyiová, Viktória ; Wierzbická, Helena (referee) ; Počinková, Marcela (advisor)
The aim of the bachelor’s thesis is to design a passive single-family house and develop its project for building permission. First part of the thesis is dedicated to structural and architectural designs. The building is designed as a two-storey detached house with gable roof and attached garage with flat green roof. Plot is located in a sloping terrain in Brno-Líšeň. First floor is partially under the ground and includes storage rooms, utility room and social zone consisting of living room and kitchen with dining area. The second floor is proposed as a private zone including two bedrooms, master bedroom with dressing room, shared bathroom and toilet. The building is based on strip foundations made from reinforced concrete. The structure of the first floor is from concrete blocks of permanent formwork, the second floor is masonry from sand-lime blocks. External walls are insulated with ETICS. Floor slab is made from hollow core pre-stressed concrete panels and roof structure consists of a timber truss. Second part of the thesis presents elaboration of energy certificate and concepts of following building services: ventilation with heat recovery, water and electricity supply, wastewater treatment plant and stormwater treatment. The focus of this part is a project documentation of heating system using water-air heat pump in combination with floor heating. Part of the thesis are also solutions of fire safety of the building, daylighting, thermal and acoustic properties of proposed structures.
|
|
|
Energy-saving building of a family house in Třebíč
Kousalíková, Jana ; Počinková, Marcela (referee) ; Blasinski, Petr (advisor)
The aim of the bachelor’s project is to design a detached passive house. The project is focused the structural and architectural design, the design some of building services, building physics and fire safety of building. The plot is situated in the south of Třebíč and terrain is almost flat. The entrance to the plot is in the north and the entrance to the house is in the west. The house has two floors and flat roof, the carport has flat green roof. On the first floor there is a wind lobby, cloakroom and utility room, hallway, guest room, bathroom and big open space which includes kitchen and living room. On the second floor there are three habitable rooms: bedroom, two children’s rooms, bathroom, toilet and two dressing rooms. The structural system consists of masonry walls. External walls are form sand-lime blocks with ETICS, load-bearing walls are from sand-lime blocks and partitions are from aerated concrete blocks. The floor slabs are from prestressed hollow core slabs and the building is based on strip foundations and permanent formwork blocks. The building services which are designed in this project are heating, mechanical ventilation, electricity service cable and stormwater management. In the house there is a mechanical ventilation unit with heat recovery. Heating is provided by air source heat pump and the stormwater is stored in the accumulation tank. Stormwater will be used to watering the garden and the excess of stormwater will be infiltration into the soil. Part of the electricity is provided by photovoltaic panels on the flat roof. The part of project is certificate of energy performance of building, rating of construction for heat conduction, acoustics, daylighting and their assessment with legislation.
|
|
|
Heating of a multifunctional house
Dlabačová, Nikola ; Blasinski, Petr (referee) ; Počinková, Marcela (advisor)
The solution to the work is the design of the heating system of the whole building, including the solution of the boiler room, in which it is proposed to place elements for pellet heating, hot water heating and control elements of the solar system, which provides heating during the summer months and, in the rest of the year, tv preheating.
|
|
|
Heating of a multifunctional house
Paták, Martin ; Horká, Lucie (referee) ; Počinková, Marcela (advisor)
The aim the bachelor´s thesis is to adrress the heating of a multifunctional building. The thesis consists of three parts: theoretical, computational, an design. In the theoretical part. The work focuses on large-scale heating ond cooling systems using ceiling panels. The computational part involves the design of heating and heat preparation for the multifunctional building, which includes a dental offices, a hair salon, classrooms, offices, and residential unit. An air/water heat pump in split configuration is proposed as the heat source. The building is heated using panel radiators and convectors, Hot water preparation is addressed through a priority non-electric storage tank. An electric heating insert assists in preheating the hot water. Thedesign part includes a technical report and drawings prepared based on the computational part.
|
|
|
Heating of a multifunctional house
Mrlina, Pavel ; Vendlová, Lucie (referee) ; Počinková, Marcela (advisor)
The main content of the bachelor's thesis is the solution of heating for a multifunctional building. The thesis is divided into three parts: theoretical, computational, and design parts. The theoretical part focuses on heat substations. The computational part is dedicated to the design of heating and hot water preparation for the multifunctional building. The building houses a dental hygiene office, administrative spaces, a shop, staff lounges, and storage areas. The building is heated using panel radiators and bench convectors. The heat source is provided by a heat substation connected to a central hot water supply system. The heat substation is thermally independent and is equipped with plate heat exchangers for both the heating system and hot water heating. The design part includes drawings and a technical report. These documents are prepared based on the computational part.
|
guest ::
