|
Developement and optimalization of methods for extraction of selected compounds from Hypericum perforatum
Chytil, Dalibor ; Štursa, Václav (referee) ; Pořízka, Jaromír (advisor)
Bachelor's thesis deals with the optimization of processes for extraction of phenolic compounds from St. John´s Wort (Hypericum perforatum). The theoretical part of the work focuses on characterization of this herb, its botanical classification, traditional use, chemical composition and curative effects. Increased attention is further devoted to a theory of preparation of samples for extraction of phenolic compounds and suitable techniques for extraction and characterization of phenolic compounds from extracts of St. John´s Wort. The experimental part of the thesis deals with application of theoretical knowledge. When optimizing the emphasis was on influence of solvent (water acified to pH 4, pH 5, pH 6), influence of extraction technique (ultrasound extraction, subcritical water extraction, maceration) and influence of extraction period (10, 20, 30 min). Extracts were subjected to determination of selected parameters (total phenolic content, total flavonoid content, antioxidant activity) in leaves of St John´s Wort harvested in June 2016 using UV-VIS spectroscopy. The used extraction techniques are significantly different from each other.
|
|
Characterization of different bran species in terms of ferulic acid content
Nábělek, Jakub ; Štursa, Václav (referee) ; Pořízka, Jaromír (advisor)
This bachelor’s thesis works with an alkaline extraction of a ferulic acid from different kinds of cereal bran. Another researched issue was extraction of nutritionally interesting elements extracted from bran and from hydrolysed waste. Those extracts has possible usage as a mineral fertilizer for plants. In the theoretical part, this thesis deals with problematice of cereals, composition and differences in a cereal grain depending on kinds of cereal and an enviromental conditions. Chemical composition of cereal materials, focused on phenolic acids are also described. Another part deals with theoretical background of methods for the extraction of phenolic acids from bran with description of advantages and disadvantages. Methods for alkaline hydrolysis and extraction of minerals from different kind of bran bran are described in experimental part of this work. Sodium hydroxide (0,5 M) was used for the hydrolysis of bran material. For the determination of the yields of ferulic acid, HPLC method with UV/VIS detection at wave-length 330 nm with usage of mobile phase mixture of methanol and 0,5 % solution of formic acid was used. Acidified deionized water was used for the extraction of nutritionally interesting elements from bran and also from the hydrolyzed material. For the determination of the elemental composition of extracts (Cu, Fe, Zn, Mn, P, Ca, K, Mg), ICP-OES method was used. It was found, that differences in wheat bran species in terms of yields of Ferulic acid are satistically important. The biggest yields of ferulic acid was obtained from the sample of spelt. The smallest yields of this acic was obtained from the sample of oat. Content of micro and macro-elements showed statistical important differences in different kinds of bran and their hydrolyzed waste. Most abundand elemets were obtained from rice bran and from spelts hydrolyzate. The smallest abundand elemens were obtaned from oat bran and hydrolyzate.
|
|
Comparison of extraction methods for agriculture soil elemental analysis
Štursa, Václav ; Vespalcová, Milena (referee) ; Diviš, Pavel (advisor)
This bachelor thesis handles with optimization of preparation process of soil samples from vineyards for elemental analysis performed by ICP-MS. First part of the thesis deals with element analysis and its usage in agrotechnics and viticulture, description of toxic and nutrition properties of individual elements and legislation defining appropriate concentration limits of elements in agricultural land. Next part describes commonly used methods for elemental analysis such as AES, AAS, roentgen fluorescence spectrometry and ICP-MS. Finally, sampling methods and methods for sample preparation such as digestion and extraction are described. Experimental part follows up comparison of selected extraction methods (2M HNO3 extraction, temperature assisted 2M HNO3 extraction, aqua regia extraction and microwave-assisted digestion using mixture of HNO3 and H2O2). These methods were applied on certified reference materials. Extracts were analysed by ICP-MS technique Best results were achieved by 2M HNO3 extraction. This extraction method was subsequently applied on real soil samples from vineyard.
|
|
Flexibilní žací lišta BISO a její uvedení na trh
Štursa, Václav
The diploma thesis: „Flexible combine header BISO and its introduction to the market” deals with the segment of flexible combine headers with a focus on the combine header BISO 3D VarioFlex AIR I and its introduction to the global markets. The thesis is divided into four main sections. In the first part, it describes the history of combine headers and currently used technical solutions, with a focus on grain headers. The second part is dedicated to the grain headers, also from the perspective of the Czech market. Also described is the current production pro-gram of the world’s leading grain header producers. In the third part, the technical and business aspects of the BISO grain header are analyzed. The focus in this part is also on the influence of individual aspects on the introduction to global markets. The fourth part uses practical tests and presents the results of these tests. Structured on the basis of these results is a SWOT analysis, and there are specific individual recommendations for the introduction of the product to global markets.
|
|
Pretreatment of hops for further processing in beer technology
Tichá, Anna ; Štursa, Václav (referee) ; Pořízka, Jaromír (advisor)
This diploma thesis deals with pre-treatment of hops for further processing in beer technology. In the experimental part of the work, the effect of low temperatures, as pre-treatment of hops, on the monitored parameters was observed. Three types of cold pretreatment were used. In two cases, the hop material was frozen using a freezer at -25 ° C and in the second case at -70 ° C. In the third case, the hop material was treated by contact with liquid nitrogen in combination with mechanical treatment. The variety of hop materiál was Žatecký poloraný červeňák, which were in the form of pellets or pressed hop cones. The total bitterness of the samples, the total content of phenolic substances, the total content of flavonoids, the antioxidant activity and the concentration of essential oils, specifically myrcene humulene and geraniol, were examined. The effect of pre-treatment was investigated during conventional worth boiling as well as dryhopping. The experimental part includes descriptions of the hopping process, descriptions of individual analytical methods. A parallel measurement was performed on each sample. Significant advantages or disadvantages of some of the pretreatments were not demonstrable, however, the most significant differences were observed in samples hopped with hops pretreated by freezing at -70 ° C, which had a positive effect on the amount of extracted essential oils during cold hops.
|
|
Effect of the dry hopping of the stability of beer foam
Benda, David ; Štursa, Václav (referee) ; Pořízka, Jaromír (advisor)
This diploma thesis deals with the influence of dry hopping on the stability of the beer foam. It was observed how this effect affected general characteristics of beer, the content of hop bitter acids, proteins, phenolic compounds, selected micro- and macro elements, organic acids and the stability od the beer foam. Theoretical part characterises raw the materials for beer production, the substances affecting the stability of beer foam and the beer brewing process. Furthermore the beer foam is described froam a physical point of view together with the steps of its formation and drainage as well as other phenomena that lead to its disappearance. A detailed description of used analytical methods is included. The experimental part illustrates the preparation of the model beer and the implementation of dry hopping with the Czech hop variety called Kazbek. Dry hopping was carried out on day 3, day 5 and day 10 with a 3 g/l and a 6 g/l hop dose. The prepared beer was subsequently analysed for general characteristics, the beer foam stability, bitter hop acids, phenolic compounds, protein, selected micro- and macroelements and organic acids. Based on the measured data, there were found correlations between the observed beer parameter and the stablity of the beer foam. The results revealed that dry hopping in beer increases the content of the phenolic compounds and bitter substances, but its effect on the beer foam stability is negative.
|
|
Beer bioflavouring by dry hopping using czech cultivars of hops
Gajdušek, Martin ; Štursa, Václav (referee) ; Pořízka, Jaromír (advisor)
This diploma thesis deals with the influence of dry hopping on selected analytical and sensory properties of beer. The effect of dry hopping was observed using Czech hop varieties Kazbek and Uran, which were added to the wort during the main fermentation phase in doses of 3 and 6 gdm-3. The contact time of hops with wort was 3, 6 and 9 days. The experimental part describes the technology of preparation of the reference beer, in which dry hopping were subsequently performed. A parallel measurement was performed on each sample. In terms of the basic parameters of beer, the effect of dry hopping, especially its length, on the ethanol content was observed. With a longer period of dry hopping, the concentration of ethanol in beer increased. The higher alcohol concentration was also associated with a decrease in the apparent extract. In terms of color and pH of beer, the effect of dry hopping has not been proven. Elemental analysis performed by optical emission spectrometry with inductively coupled plasma revealed an increase in the concentration of calcium, magnesium, and iron due to dry hopping. No statistically significant difference was observed for manganese and barium compared to the reference. In terms of bitterness, a significant increase was identified in dry hopped beers compared to the reference, the value being dependent on the dose of hops used. The effect of the hop variety has not been proved. Concentrations of organic acids determined by ion-exchange chromatography with a conductivity detector were affected by dry hopping only in the case of lactic acid and acetic acid. An increase in lactic acid was observed compared to the reference, also related to the degree of fermentation. While in the acetic acid content the hop samples showed a lower concentration than the reference sample. The concentrations of myrcene, humulene and geraniol were determined by gas chromatography with a mass detector. These are volatile components of hop essential oils. Dry hopped samples recorded significantly higher concentrations of all aromatic substances compared to the reference. In terms of hop time, the highest concentrations were shown by samples hopped for three days. The results of the sensory analysis show that the overall best rated sample is a sample hopped with the Kazbek variety with a dose of 3 gdm-3 for three days. Beer which was dry hopped for the shortest time also showed the lowest intensity of bitterness, which was perceived positively.
|
|
Study of the authenticity of spices and condiments
Štursa, Václav ; Golian, Jozef (referee) ; Urík, Martin (referee) ; Diviš, Pavel (advisor)
This disertation deals with geographical authentification of different types of spices and spice preparations. Investigated spice species were garlic (Allium sativum), ground pepper (Capsicum anuum), and dried carrot (Daucus carota). Theoretical part of the disertation describes main qualitative parameters of the examined species and production technology, means of food adulteration and statistic methods used in chemometrics. The aim of this dissertation was to verify the hypothesis whether it is possible to use targeted analytical techniques commonly used in quality control of spices and condiments, and statistical processing of measured data to distinguish samples of spices and condiments of different geographical origin. The use of non-targeted analysis was also investigated. Samples of garlic and ground pepper were used for targeted analysis. The examined parameters were dry matter and moisture of the sample, ash content, total phenolic content according to Folin-Ciocaulteu, carbohydrate content, alliin concentration, total nitrogen content, total color pigment (ASTA), pH of aqueous extract, total fat content, and concentration of selected elements (Ca, Cu, Fe, K, Mn, Mg, Na, P, Zn). The instrumental techniques used were molecular absorption spectrometry, inductively coupled plasma optical emission spectrometry and high performance liquid chromatography. The obtained data were statistically processed by analysis of variance (ANOVA) and principal component analysis (PCA). Using statistical analysis significant differences between samples that came from more distant areas were found. However, samples from closer areas could not be distinguished. The researched hypothesis could not be unequivocally confirmed or refuted. Metabolic fingerprint of carrot samples was determined using non-targeted analysis. Metabolic analysis was performed using the tandem LC-TOF-MS technique. The data were processed by recursive peak extraction (BRE) and subsequently uvaluated with PCA. The samples were divided into clusters according to their origin. Targeted and non-targeted techniques have great potential in verifying the geographical authenticity of different types of spices. However, the main condition is consistent and sufficient sampling, guaranteed information on the origin of the sample and obtaining a sufficient amount of input data for statistical analysis.
|
|
Monitoring the stability of the beer brewing process
Tichá, Anna ; Štursa, Václav (referee) ; Diviš, Pavel (advisor)
The bachelor thesis deals with the analysis of 3 samples of the same beer, brewed in different batches of the brewing process. The analyzed sample is Dalešická jedenáctka - light lager of 11% of the Stock Brewery Dalešice, a.s., which was taken directly from the lager tanks in the brewery. The aspect we have examined were total protein content, total carbohydrate content, maltose content, total polyphenol content and ethanol content. The Hartree-lowry method was used to analyzed the total protein content. Total carbohydrates were measured spectrophotometrically using anthrone reagent. The maltose content was analysed by HPLC with an ELSD detector. The total polyphenol content was analyzed by the Folin-Ciocaltau reagent method and measured spectrophotometrically. The ethanol content was analyzed on a HPLC using a refractometric detector. The aim of the work was to compare to what extent the process of beer production is stable and what parameters may change in the final product
|
|
Influence of beer protein on foam stability
Benda, David ; Štursa, Václav (referee) ; Pořízka, Jaromír (advisor)
This bachelor thesis deals with the influence of beer proteins, phenolic compounds, bitterness and selected metal ions on beer foam stability. The theoretical part describes beer foam from the physical aspect, beer foam stability and its measurement and the factors that positively or negatively influences the stability and quality of the beer foam. In the theoretical part are described selected proteins that influence beer foam. In theoretical part is described the origin and technological significance of proteins. The experimental part is dedicated to the measurement of beer foam stability with the NIBEM method, the analysis of total protein content, the analysis of total phenolic content, bitternes and element analysis of beer samples. Measured data indicated correlations between protein content, phenolic compounds content, bitterness and metal ions with the beer foam stability. The results show that proteins and phenolic compounds as isolated parameters don’t essentialy affect the beer foam stability. It was found out, that bitterness as isolated parameter influences the beer foam stability the most.
|