|
|
Balanced Scorecard Implementation within Company Environment
Lojdová, Marie ; Bühn, František (referee) ; Dohnal, Mirko (advisor)
The master’s thesis deals with Balanced Scorecard implementation within a company environment. The object of the thesis is to increase the effectiveness of strategic management which can be achieved through proper implementation of the method. The theoretical section explains the basic concepts of strategic management, followed by the description of method BSC, its implementation and risks. The practical part is focused on creating a business strategy and the model BSC implementation in particular company. As an auxiliary tool for management decision making a fuzzy model was developed and then a dialogue is held with fuzzy expert system.
|
|
|
Optical spectrometer designing
Dohnal, Marek ; Křivák, Petr (referee) ; Hudcová, Lucie (advisor)
This project focuses the problems of projection and design of optical instruments being instrumental to determination of elements in various material compounds. There are described here the structures of fundamental optical instruments and their possible variants, one of which has been chosen and further entered into details. The work specifically refers to an optical spectrometer, which by its nature, ranges the bands both of visible and near-infrared radiation. The work presents basic principles of particular parts, which the existent instrument can consist of, the advantages and disadvantages brought by the single parts. For specifically proposed configuration, intentionally set in such a way it uses state-of-the art measurement methods obtaining the best possible measurement results, the work analyzes in details the method of operation and solves numerically the theoretical assumptions for correct operation of the spectrometer. A constituent of the project is an experimental measurement testifying, with certain errors, to the theoretical solutions. The measurement errors that could result from chosen arrangement and chosen measurement method are numerically expressed in a separate sub-chapter. Further various calibration methods are mentioned, based on which the calibration method used during the experimental measurement was selected. The last part of project is focused on circumferential design of the optical spectrometer, where series of suitable circumferential elements was scrutinized. For basic elements there are presented their parameters and possible troubles related to the implementation. Furthermore the realisation of project was carried out and the spectrometer was assembled with the parts available in laboratory. The results were elaborated with a computer programme created specially for this application and then compared to a professional spectrometer.
|
|
|
Acoustical analysis of mechanical watsches
Dohnal, Marek ; Balík, Miroslav (referee) ; Sigmund, Milan (advisor)
This thesis is focused on the analysis of the characteristics of mechanical watches on the basis of their sound. There are theoretically analysed usual mechanical defects and disorders of watches and compensation of those defects. Particular attention is given to disorders, that can be extracted from the recorded acoustic sound of watches. There are also solved most appropriate methods of recording with a respect to the minimisation of ambient acoustic interference. The main part of this work is experimental measurement on watches and evaluation of achieved acoustic data. For this purpose, an autonomously running software were developed.
|
|
|
Porous elements based on granular materials and inorganic binders
Bulejko, Pavel ; Dohnal, Mirko (referee) ; Svěrák, Tomáš (advisor)
Tato diplomová práce zkoumá možnosti tvorby porézních struktur za použití partikulárních materiálů pojených anorganickými pojivy bez dodatečné tepelné úpravy vypalováním. Jako základní pojiva byly použity portlandský a hlinitanový cement a pojiva na bázi alkalicky aktivovaného metakaolinu (geopolymeru). Jako základní kamenivo byl použit karbid křemíku v různých frakcích podle velikosti částic. Byly taktéž použity další zrnité materiály, např. křemenný písek anebo odpadních materiálů (mleté sklo a porcelán) roztříděných do frakcí podle velikosti částic. Byl sledován vliv složení a množství kameniva na vytváření porézní struktury a tím i na mechanické vlastnosti, které byly testovány pomocí mechanických zkoušek. Pevnostní zkoušky byly provedeny na trámečcích 20 × 20 × 100 mm připravených z testovacích směsí. Granulometrické a fázové složení vstupních surovin bylo studováno metodou laserové granulometrie resp. RTG difrakce. Porézní struktura byla studována metodami rtuťové porozimetrie, dále pomocí světelné a rastrovací elektronové mikroskopie a taktéž pyknometrickou metodou. V rámci charakterizace přepážek (terčíky o průměru 90 mm) připravených z jednotlivých materiálů bylo provedeno stanovení efektivní permeability průtokem vzduchu. Dále byly provedeny testy vzlínavosti kapaliny v připravených materiálech. V závěru práce byly provedeny pokusy o filtraci jemných suspenzí přes uvedené přepážky.
|
|
|
Analysis of Flow Distribution in Systems with Dense Tube Bundles
Babička Fialová, Dominika ; Dohnal, Miloslav (referee) ; Turek, Vojtěch (advisor)
Considering heat transfer equipment with dense tube bundles, it is essential to ensure as uniform a fluid distribution into the tubes as possible in order to prevent various operating problems. This bachelor’s thesis therefore focuses on tube-side flow analysis in such equipment. CFD simulations were carried out using a diverse set of flow systems with outflow into a constant-pressure environment. The respective tube bundle geometries differed in densities and sizes, arrangements of the tubes, and tube diameters. Air was used as the working fluid in the majority of the cases, however, some of the simulations were also carried out with water. Data obtained from evaluations in the fluid flow modelling software ANSYS Fluent were further analysed and the influence of the mentioned differentiating parameters on flow distribution non-uniformity and pressure drop was investigated. According to the regression model, the dependence of flow distribution non-uniformity on density and size of the bundle and on mass flow rate per unit outflow area cannot be rejected with the standard significance level. As for pressure drop, the only parameter that was not rejected was mass flow rate per unit outflow area.
|
|
|
Virtual modelling of computional domain for CFD simulations
Volek, Matěj ; Naď, Martin (referee) ; Dohnal, Miloslav (advisor)
This thesis is devoted to open-source software for meshing in CFD simulations. In the opening chapter, there is introduced the computational modeling of fluid, briefly described governing equations and an introduction to the discretization of computational domain. The second chapter deals with the available mesh software. The programs are described in this chapter from the perspective of the user interface, the ability to create meshes, etc. The last chapter, there is a comparison of two selected programs on a real problem. In both programs was created a mesh which was calculated in the software Fluent. Then the calculation results are compared.
|
|
|
Design optimization of water-cooled thermocouple probe
Dohnal, Miloslav ; Vondál, Jiří (referee) ; Hájek, Jiří (advisor)
The object of this bachelor’s thesis is to create a computational model of an existing (basic) structure water-cooled thermocouple probe, to calculate and evaluate the quality of existing cooling probe and to propose possible design modifications to improve the cooling effect of the probe tip. Verify and evaluate design modifications by further calculation. The calculation will be carried out using computational fluid dynamics (CFD method). On the contrary, the aim of this work is not to create another text tool for students dealing with CFD topics. The first part describes the meaning and history of the CFD methods, then mentions the work on the principle of thermocouple probes and its application in practice. The second part of the work is devoted to problem solving. It describes the reason for the introduction of model situations when calculating the cooling effect of thermocouple probes and calculation indicates what type of flow occurs inside the thermocouple probe. It further describes the results of calculations for several approximations gradually increasing accuracy of the resulting solution of the problem and assessing the quality of cooling in the probe tip current (basic) structure. The final part deals with design changes for better cooling effect especially in the probe tip, which is verified by further calculation as well.
|
|
|
Posouzení pevnosti lepené spáry u tvarovaných překližek
Dohnal, Martin
This thesis deals with the assessment of the strength of the bond line in beech molded plywood, taken from the company TON a.s. Holešov. There will also be measured selected physical and mechanical properties of plywood. The first part provides an overview of the most commonly used plywood materials and adhesives. The next chapter deals with technological process of production of molded plywood in TON a.s. Holešov. The second part contains a methodology for measuring moisture, density, strength of the bond line, determination of bending strength, modulus of elasticity in bending and the formaldehyde content of the adhesive with subsequent statistical evaluation of measured properties. Compared are samples of plywood bonded with two types of adhesives.
|
|
|
On Parameterization of Long-wave Radiation in Small Mountain Basin in Sumava Mts
Muller, J. ; Dohnal, M. ; Tesař, Miroslav
The incoming and outgoing longwave radiations are often estimated from empirical relationships with a number of calibration coefficients. When testing the parameterization of available components of longwave radiation in the frame of a small mountaineous catchment we were able to demonstrate the reliability and robustness of calculating the outgoing longwave radiation. The estimate of net longwave radiation is burdened by considerable uncertainty, which could not be reduced by calibration of the coefficients.
|
|
|
Rainfall interception in a mature spruce forest – a case study
Černý, T. ; Dohnal, M. ; Tesař, Miroslav ; Votrubová, J.
During rainfall events, an appreciable part of the precipitation is intercepted by the vegetation surfaces. This part of rainfall, usually called interception capacity of the surface, is subsequently evaporated back to the atmosphere. Currently available distributed hydrological models require detailed knowledge of all components of hydrological cycle, including the interception and key parameters affecting its amount and rate of evaporation. In the present study the interception of the spruce forest canopy at an experimental catchment in the Bohemian Forest is examined.
|
guest ::
RSS feed.