|
|
Robotized workplace for palletizing parts
Valenta, Jan ; Bražina, Jakub (referee) ; Vetiška, Jan (advisor)
The subject of this thesis are robotic palletizing workplaces, which are theoretically analyzed ind the research part. In practical part of this thesis, these findings are used to design a specific robotic workplace. Thereafter, this design is developed in order to acquint the reader with each part of workplace. Subsequently the workplace is digitally commissioned. The result of this thesis is fully functional CAD model of the workplace with program ready to be uploaded to the robot.
|
|
|
Line protection against overload and short circuit
Konšel, Ladislav ; Vaněk, Jaromír (referee) ; Valenta, Jiří (advisor)
This work includes a theoretical treatise on the operation of electrical wiring for the overload and short circuit. This is mainly on thermal effects of over current and their influence on the properties of conductors and insulation. Work Includes links to determine the load current, depending on the properties of leadership and its surroundings. It also deals with the protection of conductors against overload and short circuit. The work includes measurements process of warming wires. Practical project of proposal circuit is created using SICHR. The project includes proposals of conductor’s sizes and safety components for both residential building and individual flats.
|
|
|
Heat treatment of maraging steel processted by SLM
Valenta, Jakub ; Vaverka, Ondřej (referee) ; Koutný, Daniel (advisor)
The bachelor thesis deals with the study of the heat treatment of the maraging steel 1.2709 (DIN X3NiCoMoTi18-9-5). The first part of the work is survay of studies that focus on heat treatment of maraging steel made by forging or Selective laser melting technology. Based on that section, a heat treatment was designed by which the samples manufactured on ProX 300 from company 3D Systems and M2 Cusing from company Concept Laser were treated. The effect of heat treatment on the mechanical properties of the samples was subsequently tested by tensile testing and metallographic analysis. The test results of both sets of samples were compared with each other and with the results of other studies and the impact of the described heat treatment on the material was evaluated.
|
|
|
Simulation of short circuit tests in a short-circuit laboratory
Vykoukal, Tomáš ; Valenta, Jiří (referee) ; Huzlík, Rostislav (advisor)
The task of this bachelor thesis was to create a short-circuit simulation test room. This short-circuit simulation test room is part of UVEE. Short-circuit test room is a complex device, which contains several types of electric machines and equipments involved in one circuit. We got to know with the involvement of short-circuit test room. And we conducted a simple simulation in Matlab toolbox Simscape Power Systems.
|
|
|
3D CAD systems used in the field of electrical apparatuses
Makki, Zbyněk ; Krejčí, Jan (referee) ; Valenta, Jiří (advisor)
The aim of this project is to describe and compare individual 3D CAD systems and data format used in the area of construction and technical support in agreement with factual needs of project submitter company OEZ, Ltd. Fulfilment of 3D CAD systems background research which are used in the area of design of the electrical switchboards LV. Description of the main possibilities, that the particular system offers. Supported data format for export and import are mentioned too.
|
|
|
Design systems used in the field of electrical apparatuses
Stejskal, Jiří ; Krejčí, Jan (referee) ; Valenta, Jiří (advisor)
Bachelor´s thesis is engaged on the base of submitter´s requests company OEZ, s.r.o. and is divided into two parts. The first part of work deals with the most often used 2D CAD systems that are used by designers according to their answers in the area of suggestion of electric switchboards low voltage. In the work are described main possibilities of these systems, then what kinds of data format are supported by them. In the second part of the work are described programs established on calculation of warming switchboards. It goes about programs, which supply concrete producer of switchboard case, and further programs based on method of final elements and method of final volume, which enable graphic representation of results.
|
|
|
Analysis of effects of short-circuit current in switchgear cabinet
Prokop, Jan ; Bušov, Bohuslav (referee) ; Valenta, Jiří (advisor)
The work is focusing on dynamic effects of short-circuit currents, more precisely dynamic effects of short-circuit currents on switchgear cabinet (terminal box). The work was designated to a concrete construction type of two switchgear cabinets located on rotating machines via company Siemens Electric Machines Drásov s.r.o.. The switchgear cabinets are designed for non-explosive environment where the air is used as an insulating medium. The task was to determine how the device will behave during the three-phase short-circuit and three-phase short-circuit with earth/ground connection. The following programs were used for the calculations and simulations: Ansoft Maxwell 16.0, Ansoft Maxwell 2015 and ANSYS Workbench 16.0. By using these programs the effects of forces which acts on current paths in cabinet caused by the passage of short-circuit current were simulated, statically and also dynamically. Further the effects of pressure acting on cabinet frame during the arc short-circuit have been statically and dynamically simulated. All the results are summarized in the conclusion. Conclusion also contains the final evaluation of the functionality of both switchgear cabinets.
|
|
| |
|
|
Contact erosion of switchgear under real conditions
Holoubek, Josef ; Bušov, Bohuslav (referee) ; Valenta, Jiří (advisor)
This bachelor thesis is focused on the material loss - contacts erosion during switching process of the switchgears. First part is focused on the switchgears generally, their dividing and functions. Then there is closer look on the contacts of switchgears and what is necessary to be considered during their designing a operating. In this part there is also section devoted to the theory of the contacts erosion including the formulas for material loss calculation, which I found in existing literature. Practical part is focused on the contact system model and the measuring performed on this model. Measuring was also performed on the real switchgears for common use. There is also part devoted to this measuring. In the last part of thesis the analyze of the measured values is performed.
|
|
|
Narrowband data transmission over the power lines
Valenta, Jaroslav ; Mišurec, Jiří (referee) ; Mlýnek, Petr (advisor)
This bachelor´s thesis is focused on narrowband data transmission over power lines. At first are described possibilities of narrowband data transmission over power lines, next the type of noises and then thesis deals with parameters of communication channel. In this thesis are described too modulation, error corection and data encryption for reliable communication. In the last part of thesis are realized practical measuring in laboratory workplace. The influence of data communication on primary function of power lines are tested. In the end are realized measuring of noise influence on data communication.
|
guest ::
RSS feed.