|
Simplified Basic Engineering Project of Distillation Unit
Šmarda, Michael ; Kohoutek, Josef (referee) ; Lenfeld, Petr (advisor)
The target of diploma thesis was to improve author’s theoretical and practical design knowledge of process engineering. In the diploma thesis a Simplified Basic Engineering Project of distillation unit has been developed. It was necessary to become familiar with the process technology and formal requirements of Basic Engineering Project. The most important parts of Basic Engineering Project are material and heat balances. Material and heat balances are the corner stones of distillation unit equipment design. Parameters of process equipment are presented in the form of equipment datasheets. The specification of pipelines is based on material and heat balances too. Inevitable part of Basic Engineering are Process Flow Diagram and Piping and Instrumentation Diagram (PFD & PID). Process Flow Diagram and Piping and Instrumentation Diagram include all equipment, piping and basic control loops.
|
|
Modelling of fouling and its influence on technical-economic characteristics of tubular heat transfer equipment in units for thermal processing of wastes
Keliš, Michal ; Kohoutek, Josef (referee) ; Jegla, Zdeněk (advisor)
The main subject of this study is the improvement of predicative ability of previously developed mathematical model for prediction of so-called “fouling critical velocity”. Attention is devoted especially to the flue gas side fouling process on active heat transfer surfaces in tubular heat exchange tube banks installed in waste incineration process plants and also a technical – economic analysis based on obtained results. The model improvement consists among others in taking into account another forces (electrostatic, capillary etc.) haven't yet been considered, which influence the mutual contact between flue gas particles in case of sedimentation fouling or the contact between particles and heat exchanger tube walls respectively. The improved model has therefore more predicative ability to the reality of fouling process. The results are used for technical – economic analysis, which determines an optimal heat exchanger design with respect to fouling. Furthermore, the algorithm of this analysis, essential fouling mechanisms, fouled heat exchanger surface cleaning methods as well as fundamental knowledge of fouling coefficient prediction are presented, whereas the emphasis is placed on industrial tubular heat exchange equipment installed in waste incineration process plants.
|
|
Selection of suitable fluid flow directions in laminar flow tubular cooler
Krobot, David ; Kohoutek, Josef (referee) ; Jegla, Zdeněk (advisor)
This master’s thesis is devoted to problematic of selection of suitable flow directions in double pipe heat exchanger. First chapter is oriented to the construction of tube heat exchangers. It is also discussed impact of construction solution to the flow character and changing of his process parameters. The difference between parallel and countercurrent flow is also occurred in this parts. The next chapter is focused to the basics of heat-hydraulic calculations of heat exchanger. This also means explanation of ways of heat transfer and heat exchanger function. There are told about specific access to the solving problem of fluid laminar flow. The third chapter is detailed focused to the calculating of heat exchanger. At first is discussed factors, which have impact to the flow character. Next are detailed descriptions of design and controlling calculations, including more alternative ways to solve it. Next chapter exploit those results for deciding, which flow arrangement will be better for given case. Last chapter contain realization and reformulating of process heat exchanger calculating to the program code in Maple. There is also description of used algorithms and operating with them, so any user could be able to work with it. In this master’s thesis are used many examples from attached programs on different parts.
|
|
Calculation prediction of characteristic parameters of combustion process
Táborský, Miroslav ; Kohoutek, Josef (referee) ; Jegla, Zdeněk (advisor)
The present thesis is focused on calculation prediction of characteristic parameters of combustion process in combustion chamber which is installed at burners testing laboratory. In the thesis basic theoretical knowledge needed for description of heat transfer in process combustion equipment are given. The Plug Flow Furnace Model is based on this knowledge. This model is used to evaluation of specific heat flux in tube furnaces. In the next step the Plug – Flow model is modified and adapted on the combustion chamber. Obtained results are compared with a measured data. By this comparison quality of this model is assessed.
|
| |
| |
| |
|
Analysis and Design of E-commerce Firms
Kohoutek, Josef ; Luhan, Jan (referee) ; Němcová, Zuzana (advisor)
In my bachelor´s thesis, I focus on the proposal for a new e-commerce solution for the company ABBAS, a.s. which specializes in selling security systems, especially for camera systems. The thesis is divided into two parts. The first part deals with the theoretical knowledge of the issue. The second part is focused on the practical part of e-commerce issues such as SEO analysis, competition analysis, keyword analysis, choice of providers of electronic commerce, methods of promotion and design possible solutions.
|
| |
| |