|
|
Magnetic field measurement
Dušek, Jiří ; Máca, Josef (referee) ; Vyroubal, Petr (advisor)
Bachelor thesis describes ways and technology for measuring of the magnetic field. Furthermore it deals with comparing sensors for magnetic fields measuring and creating a basic conception of the meter. For design of conception was selected sensor HMC2003 from Honeywell company. Design of conception describes two units, which meter contains. Conception include power, compensation and reset circuits. After that is detailed describe layout of both printed circuit boards, setting up and soldering components. Output of this meter is signal of the three axis of sensor. Meter was subjected to trial run, which verified functionality of the whole device.
|
|
|
Design of screw driven lift
Kratochvíl, Michal ; Klapka, Milan (referee) ; Dvořáček, Jiří (advisor)
This bachelor‘s thesis was created in order to create a new engineering design solutions power unit and lifting device of the lifting platform. Due to the rapid wear of the rope and the increasing cosi, it is necessary to modify this design.. In the first part of this thesis is elaborated research dealing with the issue of lifting equipment. After this section, followed by a proposal and the final design solutions. For the solution variant is prepared drawing documentation.
|
|
|
Machining of shaft for hybrid car drive
Göth, Karel ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
This bachelor thesis deals with the production of a shaft for driving a hybrid motor. The whole proces is illustrated by a production process, which has the task of executing the worker from the first task to the last. The work is also focused on the issue of hybrid vehicles, especially the nature of the hybrid engine and their types.
|
|
| |
|
|
Comparison of life-cycle emission produced by cars
Plott, Patrik ; Ušiak, Michal (referee) ; Fridrichová, Kateřina (advisor)
This bachelor´s thesis of research nature deals with comparison of emissions of individual types of passenger car´s powertrains in terms of their entire life cycle. The goal was to describe current emission regulations of passenger vehicles, various types of power units they use, and emissions that are created in manufacturing, using and disposal of these vehicles. The comparison includes not only different types of internal combustion engine vehicles, but also electric vehicles. In conclusion were these power units evaluated based on emission considering current situation.
|
|
|
Development of Formula 1 cars
Šopík, Lukáš ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
This bachelor´s thesis deals with development of Formula One cars from the begging of the Formula One Worlds Driver´s Championship and describes the first twenty years of this development. This period is characteristic as the replacement of the pre-war cars with engine in front for the cars with engine behind the driver, which is typical for nowadays Formula One. There are description of main construction components and their subgroups, which had been improved by using new materials and technologies.
|
|
|
Formula 1 Turbo Engines
Prokšová, Lucie ; Drápal, Lubomír (referee) ; Svída, David (advisor)
This thesis deals with the outline of turbocharged engines Formula 1 cars. There are some types of turbocharged engines widely used in the 80s and their history. This is followed by introduction to season 2014, new rules and all together.
|
|
|
Comparison of life-cycle emission produced by cars
Plott, Patrik ; Ušiak, Michal (referee) ; Fridrichová, Kateřina (advisor)
This bachelor´s thesis of research nature deals with comparison of emissions of individual types of passenger car´s powertrains in terms of their entire life cycle. The goal was to describe current emission regulations of passenger vehicles, various types of power units they use, and emissions that are created in manufacturing, using and disposal of these vehicles. The comparison includes not only different types of internal combustion engine vehicles, but also electric vehicles. In conclusion were these power units evaluated based on emission considering current situation.
|
|
|
Machining of shaft for hybrid car drive
Göth, Karel ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
This bachelor thesis deals with the production of a shaft for driving a hybrid motor. The whole proces is illustrated by a production process, which has the task of executing the worker from the first task to the last. The work is also focused on the issue of hybrid vehicles, especially the nature of the hybrid engine and their types.
|
|
|
Magnetic field measurement
Dušek, Jiří ; Máca, Josef (referee) ; Vyroubal, Petr (advisor)
Bachelor thesis describes ways and technology for measuring of the magnetic field. Furthermore it deals with comparing sensors for magnetic fields measuring and creating a basic conception of the meter. For design of conception was selected sensor HMC2003 from Honeywell company. Design of conception describes two units, which meter contains. Conception include power, compensation and reset circuits. After that is detailed describe layout of both printed circuit boards, setting up and soldering components. Output of this meter is signal of the three axis of sensor. Meter was subjected to trial run, which verified functionality of the whole device.
|
guest ::
