|
|
Design and realization of ADSR filter
Pokorný, Martin ; Kratochvíl, Tomáš (referee) ; Slezák, Josef (advisor)
The master´s thesis is focused on design of ADSR filter and voltage controlled amplifier (VCA). Three additional circuits performing analog signal processing are added. Functionality of designed circuits is verified in simulation program. All designed circuits are practically realized. Thesis includes complete design of the mentioned circuits and all necessary informations for its practical realization. All designed circuits are measured and the results are presented.
|
|
|
Propulsion unit of competition model airplane
Vančo, Miroslav ; Matějů, Jiří (referee) ; Hájek, Tomáš (advisor)
This bachelor´s thesis deals with the design and validation of the operation of the model propulsion system, according to the Aero Design East rules. The introduction is focused on rules and regulations of the competition and then, the point analysis is carried out. The research section is devoted to an overview of the propulsion system components and their basic parameters. The most appropriate configurations of the propulsion system are selected, based on calculations from the manufacturer´s datasheet. These configurations are then validated by measurements of static thrust and measurements in aerodynamic tunnel. In these measurements, the responses of the limiter for boundary power are also examined. In the last part, the choice of the propulsion system is completed.
|
|
|
Analyses of the breaker/limiter functions for low voltage supply points
Bajánková, Denisa ; Toman, Petr (referee) ; Topolánek, David (advisor)
The diploma thesis provides an insight into the remote control and disconnection of DSO supply points phenomenon. The remote or local disconnection/connection of supply point is allowed by the breaker function. The automatic disconnection of supply point is enabled by the limiter function. Due to the anticipated implementation of smart meters in the Czech Republic in the future, this work contains the comprehensive description of breaker/limiter function with proposed possibilities of use in the Czech Republic. The thesis deals with the current breaker/limiter function use in the Czech Republic and in other countries. It introduces the smart meter installation in pilot projects to analyze the breaker/limiter function use in other countries. The thesis is focused on the technical solution of breaker/limiter. Moreover, it describes the ways of connecting the breaker, settting the limiter, connecting/disconnecting a supply point and breaker operation. Further, the thesis introduces the ways of activating the breaker by a customer and defines in which cases it is possible to limit and interrupt the electricity supply in the Czech Republic currently. The main aim of thesis is to describe the specific possibilities of breaker/limiter function use in the Czech Republic. With regard to the function use in other countries and the limiting or interrupting the electricity supply by DSO according to energy law, the possibilities of use are proposed. Each possibility of use is analyzed when implementing the breaker function or the breaker/limiter function. The benefits are defined for a DSO and for a customer. The proposed uses are evaluated in terms of applicability and valid legislation in the Czech Republic. The result of this work is the summary of information about breaker/limiter function which is one of the new features in the implementation of smart metering. The function installation and the implementation of possibilities described in the thesis depends on the DSO decision.
|
|
|
Shaping networks and limiters for educational laboratory purposes
Barč, Andrej ; Domanský, Ondřej (referee) ; Šotner, Roman (advisor)
This bachelor thesis deals with design and implementation of shaping diode circuits and double - sided diode limiter of sinusoidal signal for laboratory use in low frequency band. This is a 3-segments and 6-segments shaping circuit with and without active element (without operational amplifier). The circuits form a triangular signal to harmonic signal. The aim of the design was to achieve the least possible distortion of the output signal on the largest frequency range of usability. The functionality of the circuits was verified by measurement and a laboratory protocol was constructed from the measurement result. The measurement results were compared with the results of ideal simulated waveforms.
|
|
|
Lab power supply 0-100 V / 0-100 mA
Hanzl, Ondřej ; Pazdera, Ivo (referee) ; Martiš, Jan (advisor)
The thesis deals with the design of a laboratory source of atypical parameters of the voltage range 0 – 100 V and current 0 – 100 mA, which will be used for testing LEDs, measuring the reverse voltage and characteristics of Zener diodes of unknown data. The power supply will operate in linear mode, where the output part make up a power unipolar transistor controlled by a controlled bipolar transistor. The control section controlling this output stage is a closed control loop with two PI controllers, a differential amplifier and a controlled limiter. In the control circuit, the controllers are arranged in a cascade structure, where the voltage regulator is superior to the current one. Power supply is provided by 2 transformers, one for the power part and the other for the control part. All designed and assembled components will be then placed in a box equipped with a digital measuring device with display.
|
|
|
RF power meter
Hlaváč, Štěpán ; Jedlička,, Petr (referee) ; Drexler, Petr (advisor)
This master’s thesis describes various principles of measurement of electromagnetic waves in a free space and on a line. Used sensors and their real parameters are given for every method. The analysis of protections of high-frequency inputs of measuring instruments is done here and the most suitable method and protections of input for realization are chosen. The analysis of design of secondary protection of high-frequency input is done in this project. The protection of input is realized and measured. The suitable method of measurement is chosen as well as the sensor for measurement of power. The block diagram and circuit diagram of the meter of power are designed. According to designed conception the measuring instrument for measurement of power is realized and its single qualities are measured during the realization. In the final part its precision is measured and the evaluation of results is done.
|
|
|
Audio signal dynamic compressors
Král, Vítězslav ; Kubánek, David (referee) ; Koton, Jaroslav (advisor)
The aim of this bachelor thesis is to get acquainted with the problems of analog compressors dynamics of the audio signal and practically verify one selected diagram. It deals with individual functional blocks compressor dynamics and shows examples of their implementation. Explains the characteristics of analog compressors and clearly justifies their importance. The thesis also describes the different topologies of analog compressors. Also discusses dynamic processors as such and summarizes their distribution by elementary principle and functionality.
|
|
|
VST Plug-in for Dynamic Processing of Audio Signal
Zoň, Robin ; Frenštátský, Petr (referee) ; Schimmel, Jiří (advisor)
The aim of this thesis is the implementation of effects for adjusting the signal dynamics. This project includes four basic dynamic effects - compressor, expander, limiter and noise gate. The first part is developed in Matlab software. This solution offers signal sidechain input, display of signal waveforms of each block of sidechain branch, recording output signal and allows storage of output characteristics. In the second part, the effect is being realized using VST technology, which offers the possibility of changing the parameters in real time and displaying and recording the signal at various points within the control branch. Project also includes a brief discussion of the use of such dynamic effects in practice and collection of model examples to demonstrate the use of such effects.
|
|
|
Universal Audio 1176 Compressor
Pavlik, Miroslav ; Ištvánek, Matěj (referee) ; Koton, Jaroslav (advisor)
The aim of this bachelor thesis is to get acquainted with the issue of analog compressor Universal Audio 1176 and verify the functionality and principles of individual block diagrams of this compressor. The bachelor's thesis is carried out for a detailed analysis of individual blocks of compressor 1176. A practical implementation was constructed, to verify the correct functionality of compressor 1176 on measurements, which were performed in the laboratory.
|
|
|
Digital Audio Signal Feature Extraction and Modification in Dynamic Plane
Kramoliš, Ondřej ; Sysel, Petr (referee) ; Schimmel, Jiří (advisor)
This thesis deals with basic methods of root mean square and peak value measurement of a digital acoustic signal, algotithms to measure audio programme loudness and true-peak audio level according to recommendation ITU-R BS.1770-1 and digital systems for control of signal dynamic range. It shows achieved results of root mean square and peak value measurement and results of implementation of dynamic processor with general piecewise linear non-decreasing static curve and algorithms according to recommendation ITU-R BS.1770-1.
|
guest ::
