|
|
Temperature Profile in Reflow Soldering and Influence of Different PCBś and ComponentsThermal Capacities
Procházka, Martin ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
This thesis mainly deals with the prediction of temperature on the components and the PCB during reflow soldering. The theoretical part describes the particular solder reflow process, types of heat transfer and temperature profiles. The practical part is divided into forecasting temperatures if the conveyor is stopped and the temperature predictions when the conveyor is in motion. In both parts of the measured temperature is compared with the predicted temperatures, which show the success rate of prediction. The last part of this work is part of the simulation, which helps in proper understanding of the issues discussed.
|
|
|
Thermoproperties of foundry moulds in dependence on different used foundry sands
Šuráň, Jiří ; Rusín, Karel (referee) ; Cupák, Petr (advisor)
The project elaborated in frame of engineering studies is submitting the study of thermal properties of holding mixtures using different types of sand. Were tested a total of 5 sands: zirkon, ŠH22, chromite, olivine and dunite. Molding compounds were tested for thermal capacity, thermal conductivity and heat accumulation. The highest heat capacity was achieved in dunite sand. The largest heat accumulation had mixture with chromite sand and the best thermal conductivity was found in a mixture with olivine sand.
|
|
|
Study of applicability of suitable materials for long-term storage of heat energy
Bukvová, Veronika ; Šot, František (referee) ; Šťastník, Stanislav (advisor)
This bachelor thesis deals with appropriate ways of storing thermal energy and selection of materials for a high capacity storage unit. The thesis describes technologies currently used for long-term storage of thermal energy, structural arrangement of the thermal unit, physical properties of the materials usable for construction of high-temperature storage units and the utilization of these materials. The thesis also describes the measuring procedure of the material characteristics and the method of evaluation.
|
|
| |
|
|
Calculation of flue gas properties
Štenclová, Kristýna ; Brázdil, Marian (referee) ; Pospíšil, Jiří (advisor)
This Bachelor´s thesis deals with properties of combustion products depending on temperature. The first part is theoretical and includes summary of basic terms of combustion. The second part includes a recherché. It is focused on elementary analysis of fuel and basic properties of combustion products, i.e. heat capacity, density, enthalpy, heat conductivity, kinematic viscosity and number of Prandtl. In the last part of thesis, there is an example of a spe-cific exchanger and his solving based on four various inputs of these properties.
|
|
|
Properties comparison of two products used for skating rink based on ehtylene-propylene-dien rubber
Kostková, Jana ; Kučera, František (referee) ; Bálková, Radka (advisor)
This master thesis deals with characterization of two black and white products based on ethylene-propylene-diene rubber (EPDM) used for skating rink. Products marked with A and are different in their diameter of circular tubes trough which cooling medium passes and also in the distance of these tubes. Both of materials were characterized in order to determine whether it is the EPDM and how are they different. The characterization methods were used: differential scanning calorimetry, thermogravimetric analysis, attenuated total reflectance Fourier transform infrared spectroscopy, tensile test, swelling test, thermooxidative test. The composition of both materials, including fillers and others additives is almost the same but difference is in structure of EPDM and probably also in interaction with fillers, what exhibits different mechanical properties, thermooxidative stability and thermal capacity. These differences which have been found are essential for long-term use properties of both materials.
|
|
|
Tube heat exchanger for heating water.
Novotný, Roman ; Rostislav, Ratkovský (referee) ; Skála, Zdeněk (advisor)
Target of the master´ thesis is a design of heat exchanger air-water with the air flowing inside the pipes and with staggered pipe configuration, based on the engaged and chosen values. Next target is to determine heat exchanger with cross parallel flow and cross countercurrent flow of mediums, pressure drop on both sides air and water and dimensions of intake and outgoing gate on both sides air and water.
|
|
|
Design of a calorimeter to characterize the properties of commercial batteries
Gavalierová, Veronika ; Šedina, Martin (referee) ; Kazda, Tomáš (advisor)
This thesis is focused on the study of the heat capacity of Li-ion cells. The theoretical part contains the basic issues of the technology, basic concepts, and knowledge. The next chapter, the practical part, is devoted to the practical measurement of the specific heat capacity of batteries, using a calorimeter. Various types of batteries were investigated, and a larger calorimeter was also constructed and described. This bulkier calorimeter was used for a larger pouch cell.
|
|
|
Determination of crystal field parameters in selected tetragonal compounds
Zubáč, Jan ; Javorský, Pavel (advisor) ; Prchal, Jiří (referee)
The thesis deals with a crystal electric field and its effect on magnetic properties of the in- termetalic tetragonal rare-earth compounds. Using the self-flux method we have prepared single crystals of two R2TIn8 type compounds, namely Nd2RhIn8 and Nd2IrIn8. These compounds or- der antiferromagnetically in low-temperature region. We have verified a proper structure through EDX analysis, X-ray powder diffraction and Laue diffraction method. Calculations of the crystal field parametres based on experimental magnetic susceptibilities data were performed. Apart from Nd2RhIn8, we have computed crystal field parameters for isostructural Nd2CoIn8 and Dy2CoIn8 compounds and cerium compound CeCuAl3. These compounds are studied simultaneously at our department.
|
|
|
Magnetic excitations in cerium compounds
Vlášková, Kristina ; Javorský, Pavel (advisor) ; Prchal, Jiří (referee)
Title: Magnetic excitations in cerium compounds Author: Kristina Vlášková Department: Department of Condensed Matter Physic Supervisor: doc. Mgr Pavel Javorský, Dr., Department of Condensed Matter Physics Abstract: Thanks to presence of only one electron in 4f shell of cerium ion, Ce based compounds reveal wide range of exceptional magnetic properties like valence fluctuations, magnetic ordering or spin glass behavior. In present thesis we mainly focus on tetragonal CeCuxAl4-x system and its magnetic behavior. Former results of inelastic neutron experiments opened discussion about energy levels of cerium ions in CeCuAl3. Except two crystal field excitations also one additional energy level was present, phenomenon of vibron quasi-bound state was proposed to explain observed energy structure. Measurement and analysis of specific heat and neutron inelastic scattering on compounds with various Cu content should help to understand phenomenon of vibron state and also its development with Cu/Al concentration. Another two types of cerium compounds will be investigated in means of specific heat and resistivity measurement, polycrystalline sample of CePt4Al and single crystal of Ce3Ru4Al12. Preparation, characterization and measurement of low temperature properties are subjects of this work. Results will be discussed...
|
guest ::
