Original title:
Tepelné vlastnosti forem v závislosti na použitém ostřivu
Translated title:
Thermoproperties of foundry moulds in dependence on different used foundry sands
Authors:
Šuráň, Jiří ; Rusín, Karel (referee) ; Cupák, Petr (advisor) Document type: Master’s theses
Year:
2012
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Projekt vypracovaný v rámci inženýrského studia předkládá studii pro tepelné vlastnosti formovacích směsí s použitím různých druhů ostřiv. Bylo testováno celkem 5 ostřiv a to: zirkon, ŠH22, chromit, olivín a dunit. Formovací směsi byly testovány na tepelnou kapacitu, tepelnou akumulaci a tepelnou vodivost. Nejvyšší tepelné kapacity bylo dosaženo u dunitového ostřiva. Největší tepelnou akumulaci měla směs s chromitovým ostřivem a nejlepší tepelná vodivost byla zjištěna u směsi s olivínovým ostřivem.
The project elaborated in frame of engineering studies is submitting the study of thermal properties of holding mixtures using different types of sand. Were tested a total of 5 sands: zirkon, ŠH22, chromite, olivine and dunite. Molding compounds were tested for thermal capacity, thermal conductivity and heat accumulation. The highest heat capacity was achieved in dunite sand. The largest heat accumulation had mixture with chromite sand and the best thermal conductivity was found in a mixture with olivine sand.
Keywords:
chromite; dunite; heat accumulation; heat capacity; Molding compounds; olivine; opening material; thermal conductivity; water glass; zirkon; ŠH22; chromit.; dunit; Formovací směs; olivín; ostřivo; tepelná akumulace; tepelná kapacita; tepelná vodivost; vodní sklo; zirkon; ŠH22
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/8478