|
|
Energy-saving family house in Šumice
Jurák, Štěpán ; Rubinová, Olga (referee) ; Počinková, Marcela (advisor)
The aim of the bachelor's thesis is to design a energy-saving detached house located on the outskirts in the village of Šumice, located of Uherské Hradiště district. The house consists of two floors, with a second-floor step-in terrace, a flat sedum roof on the top, and a one-car garage. The main entrance is facing the northwest. The social area of the house is on the first floor, including a dressing room, a utility room, a bathroom, a toilet, a study room, and a living room that is connected to the kitchen and dining room. The quiet zone is on the second floor, consisting of two children's rooms, a master bedroom with a walk-in closet, a bathroom, a toilet, and a small storage room. The house is based on concrete foundation strips. The vertical load-bearing structures are designed from ceramic blocks with thermal insulation. Horizontal load-bearing structures are reinforced concrete slabs. The building is heated by the air-water heat pump. The main heating system is a floor heating system combined with radiators and towel radiators. The utility room is designed with mechanical ventilation with a heat recovery unit. Exhaust and intake are located on the north facade. Fresh air is supplied in living rooms and exhaust air suction in the garage, bathrooms, and walk-in closet. The building is connected to the water mains and the combined sewer. In the heat pump is installed a hot water cylinder. Stormwater accumulated in the tank then used for toilet flushing and watering the garden.
|
|
|
Small apartment building
Kalčík, Aleš ; Bečkovský, David (referee) ; Vystrčil, Jan (advisor)
The subject of the bachelor's thesis is the preparation of construction documentation for a small apartment building. The building is located on an almost perfectly flat area near the Morava River in Napajedla. The structure of the building consists of four above-ground floors and one underground floor, which is completely hidden below the terrain. The underground floor contains a technical room and communal garages. The above-ground floors contain a total of 12 apartment units and accessory spaces for these apartments. The estimated number of residents of the building is 34. None of the apartment units are designed to be barrier-free. However, access to the building is barrier-free, and the parking spaces include designated spots for the handicapped. The substructure is founded on piles, followed by monolithic reinforced concrete structures. These reinforced concrete structures transition to traditional masonry construction in the first above-ground floor, using a combination of ceramic blocks and monolithic reinforced concrete ceiling structures. The roof of the building is intended to be a flat green roof with extensive vegetation.
|
|
|
Family house with cinema room
Kurka, Štěpán ; Pobucká, Slávka (referee) ; Sobotka, Jindřich (advisor)
As part of the bachelor's thesis, project documentation was developed at the construction implementation level within the partially required scope. The documentation includes a project for a family house located in the northern part of the village of Kobeřice in Silesia. The new building is integrated into an already developed area of the village and is set into the terrain, taking advantage of the sloping land for the operational solution. The building is designed as a single dwelling unit for permanent residence by five people, with technical facilities and garage space. Access to the dwelling unit is provided from the west side to the first above-ground floor. From a material perspective, the building is designed using predominantly ceramic blocks for both load-bearing and non-load-bearing vertical structures. The building envelope is insulated with an ETICS system to reduce energy consumption. The construction is based on monolithic foundation strips with a base concrete slab. The ceiling structures in the building are made of monolithic reinforced concrete slabs. The building is roofed with two flat single-layer roofs at different height levels. The roof at the lower level is designed with a vegetative surface finish.
|
|
|
Technological stage of the upper rough construction of an apartment building in Brno
Klech, Ivo ; Strádalová, Aneta (referee) ; Kantová, Radka (advisor)
The main aim of my bachelor thesis is the construction technological solution of the rough upper construction of the residential building located in Brno in Sadová street. This thesis contains a technical report of the given technological stage, a situation of the building with broader relations of transport routes, a statement of dimensions for the technological stage, a technological regulation including a balance of resources with a variant solution of the partition masonry, a drawing of the construction site equipment together with the technical report, timetables with a variant solution, a design of the machine assembly, an inspection and testing plan for the masonry stage and ensuring work safety. The last chapter of this work is the itemized budget for the variant solutions and selected construction details.
|
|
|
Residential building
Šeps, Daniel ; Bartlová, Jana (referee) ; Vajkay, František (advisor)
The subject of the bachelor thesis is the design of a new building of a detached apartment building in Nová Paka in the form of project documentation for construction. The buiding is designed brick with reinforced concrete ceilings. Perimeter walls on the 1st – 3rd floor is designed ceramic brick blocks th. 300 mm with contact thermal insulation system ETICS th. 200mm, which will be equipped with silicone plaster 1,5mm. Perimeter walls on the underground floor is designed permanent shuttering DITTON 30 th. 300mm, filled with concrete C20/25 XC1 and by steel B500B insulated with extruded polystyrene XPS th. 160mm. Internal load-bearing masonry wall is designed with acoustic ceramic brick blocks th. 250 mm. Partitions are designed from acoustic partition walls. On the ceilings is a hardwood flooring because of excellent acoustic characteristics. The roof is designed as a flat green roof with extensive vegetation and with thermal isolation of minera wool and with waterproofing layer made of bituminous modified SBS strips laid in two layers. Balcony railing is designed aluminous with safety glass paneling.
|
|
|
Apartment house
Vrbický, Josef ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
The subject of the bachelor thesis is the design of a new building of a detached apartment building in Holice, in the form of project documentation for construction. The building is designed with bricks and ceilings made of beams and ceramic inserts. The peripheral masonry is designed from ceramic brick blocks th. 300 mm completed with contact insulation system ETICS th. 200 mm, which will be equipped with silicone plaster 1,5mm. The internal load-bearing masonry is designed from acoustic ceramic brick blocks th. 250 and 300 mm. Partitions are designed from acoustic partition walls. On the ceilings, a heavy floating floor with excellent acoustic properties is designed. The roof is designed flat single-skin with thermal insulation of mineral wool and with waterproofing layer made of bitumen modified SBS strips laid in two layers. Balcony railing is designed aluminum with safety glass paneling.
|
|
|
Detached house
Hort, Martin ; Kvapilová, Vendula (referee) ; Jelínek, Petr (advisor)
The bachelor thesis has been solving a design of a detached house in Naměšt´ nad Oslavou of Třebíč district. The detached house has been designed as a two-floor house, partly cellared with a flat roof. The projet was created with the main aim of creating a permanent living for a four- member family. A garage is a part of the project too. Perimeter walls of the basement are made of concrete blocks poured by concrete and for perimetric walls of the elevated floor were used Porotherm brick blocks stuffed with mineral isolation. A monolitic ceiling construction is combination of iron and concrete.A lot is located on a southern subtle slope. A part of the project is a technical evaluation, fire emergency measures, other calculations and outcome of building physics. The thesis is elaborated in the form of implementing project, a drawing and documentary part is included.
|
|
|
The survey and assessment of stone construction
Šarounová, Pavla ; Bažant,, Zdeněk (referee) ; Cikrle, Petr (advisor)
This thesis is focused on applying the process of the assessment of existing structures from ČSN ISO 13822 on the evaluation of stone constructions. These are seen here as masonry structures, but with some specifics. Since the source of this specifics results from the natural origin of the building material and significant age of preserved stone structures, to its evaluation also the knowledge of geology and history of architecture is necessary. For this reason, this thesis contains also the geological overview of rocks used for building and describes characteristics of stone structures from different architectural periods. The aim of the practical part is to describe preliminary investigation of an existing stone construction on the example of the stone bridge in Dobromilice.
|
|
|
Administrative building
Valentová, Nela ; Kacálková, Lenka (referee) ; Smolka, Radim (advisor)
The subject of this master‘s thesis is the processing of the design documentation for an object at the realization of the construction phase for the object of the office building in Pelhřimov. The final object is a building with 3 above floors and 1 underground floor. The foundation structure is designed in the form of foundation strips. The walls are made of ceramic blocks and the walls on the underground floor are made of reinforced concrete. Ceiling constructions are designed as cast-in-place reinforced slabs. The object is roofed with a pitched roof, the load-bearing structure of the roof consists of nailed timber truss. The building of the adjacent single-storey building of cold storage facility is roofed with a warm green flat roof. The external thermal insulation of the building is considered as the external thermal insulation composite system (ETICS). Energy for heating and domestic hot water is provided by heat pumps. Ventilation in the building is provided by an air conditioning unit. Rainwater from the roof is collected in an infiltration polder located on the property. The thesis is processed mainly in the software AutoCAD, ArchiCAD, MS Word, MS Excel and DEKSOFT.
|
|
|
Apartment building
Luong, Quoc Thang ; Kervitcer, Marek (referee) ; Brukner, Bohuslav (advisor)
The objective of this bachelor’s thesis is to create a design of a new building which is a block of flats which corresponds with the level of project documentation for construction. It is a four-storey apartment building containing a basement which will be built in Olomouc – Povel on the street Jeremiášova. Altogether 19 housing units will be available for the total of 39 residents. Further there will be 14 parking spots (8 spots in the underground parking, 6 spots for outdoor parking). A cellar cubicle is assigned to each apartment in the first floor. A transverse masonry made of ceramic blocks was selected as a structural system in overhead floors and from concrete block in the basement. The whole object is insulated by a contact thermal insulation system.
|
guest ::
