|
|
Shopping centre entrance area
Čech, Ondřej ; Sýkora, Karel (referee) ; Brosch, Petr (advisor)
Diploma thesis describes the design and assessment of roof structure that covers entrance of the shopping center. Structure has an irregular floor plan and roof height is 16.5 m. The material of the structure is steel S355. The construction is located in Hradec Kralove. Two options were processed that were designed and evaluated according to applicable standards. The work also includes the design of anchoring and selected joints.
|
|
|
The Multipurpose Centre in Olomouc
Toman, Tomáš ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
This diploma thesis deals with design of timber load-bearing structure of a Multi-functional object in Olomouc. This object has an eliptical ground plan with dimensions 50x30 metres and height of 11 metres. The idea of the shape is an eliptical dome. This dome was designed in two options, those are a Rib dome and a Föppel dome.
|
|
|
The Steel Structure of Car Showroom
Buchta, Vojtěch ; Buchta, Stanislav (referee) ; Hron, Lukáš (advisor)
The task of the thesis was to design a draft and a review of car’s showroom supporting structure. The object is located in the city of Hradec Králové. Floor plan has a size of 30 x 15 m, the height of the object is 7 m at the highest point. The mono-pitched roof is formed by two parts on the same slope 3.81 °. Material of all components is steel S235. All calculations were performed in accordance with valid standards. The structure consists of a load-bearing columns fixed to the ground, the truss girders are designed of hollow cross-sections, pin-suported by the columns. The purlins are pin supported by upper chords of a truss girder, with the lower and upper edges flushing. Purlins support the roof made of roof-panels by Kingspan, thickness 160 mm. Wall casing the technical parts of the object is formed also by system panels by Kingspan. The cladding of the sales area is made of glass panels by Reynaers.
|
|
|
Reinforced concrete structure of a administrative building
Mazura, Marek ; Jeneš, Rostislav (referee) ; Šulák, Pavel (advisor)
The subject of bachelor‘s thesis is to design and assess point-supported reinforced concrete slab. It is a floor slab above the 1st floor of a typical floor of an office building, which is designed as a four-storey. The shape in plan of the slab is a hexagon, so that the columns are not arranged regularly. The structural design was performed in Scia Engineer Finite Element Method and verified by simplified methods. The output of this work is drawings of shape and reinforcement of reinforced concrete slab.
|
|
|
Multi-storey building
Hasil, Tadeáš ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
The subject of the bachelor´s thesis is structural design multi-storey building a department store. The structure is designed for the site Brno.Static calculation is solved by a combination of manual calculation and calculation using software R-STAB.The steel structure is placed between the reinforced concrete towers.The purpose of reinforced concrete is vertical transport. Transversal course is dividet to 6,0+3,0+6,0=15m.Longitudal course is dividet to 9x6,0m = 54m
|
|
|
Slab bridge in the Vlaské village
Zemánek, Tomáš ; Olšák, Martin (referee) ; Panáček, Josef (advisor)
Bachelor thesis solves design of perpendicular road bridge over the Morava river in village Vlaské. Bridge object transfers communication of 2nd road class II/312, communication category is S7,5. For design are processed 3 studies. Variant no. 2 was selected for more broad processing. The issue is post-tensioned concrete haunched slab of height 0,900m and lenght 20,850m. Calculation of load is analysed by software SCIA engineer 2015. The design and assessment of the structure are made according to valid standards and regulations.
|
|
|
Mechanical barrier project
Kubeš, Ondřej ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
The first part of the thesis analysis is about the most common concepts of barriers which restrict the passage of vehicles. These provide security for parking cars. On the basis of this analysis is made design of road barrier. This proposal is accompanied by the plan.
|
|
|
Magnetic separator
Šnédar, Jan ; Malášek, Jiří (referee) ; Jonák, Martin (advisor)
The aim of this bachelor thesis is to design the structural conception of belt magnetic separator with permanent magnet designated to separate unwanted ferromagnetic material waste from the machining of aluminium. This report contains an overview of equipment for the separation and design of concrete solutions to the magnetic separator. According to the input parameters are calculated all the parameters necessary for correct machine design. Attachments to this technical report are documentation drawings of selected parts and assemblies.
|
|
|
The Structure of the Atypical Family House in Vrchlabí
Vondráček, Vít ; Hron, Lukáš (referee) ; Šmak, Milan (advisor)
The subject of master’s thesis is design and assessment of steel load-bearing construction of atypical family house in Vrchlabí. Structure is designed as multi-storey steel structure, cooperating with stiff concrete core. The design was considered in four different options which combines possibility of using steel, steel and timber with different way of stiffness for whole structure. There is also composite steel-concrete alternative floor trimmer for selected option. Design and assessment was conducted in accordance with the applicable standards and by using software Scia Engineer.
|
|
|
Steel Structure of Observation Tower
Virág, Patrik ; Pilgr, Milan (referee) ; Hron, Lukáš (advisor)
The subject of the diploma thesis is design and structural analysis of loadbearing steel structure of observation tower, which is located southeast of Černá Hora, township Blansko. The design is processed in two options. Parts of the thesis are engineering report, structural design report for both of the options and graphical documentation in specified range. The structure’s height is 25.3 m and maximal ground plan dimension is 6 x 6 m. Steel grade S355 was chosen as main material. The sub-objectives of the structural analysis are load effects calculations (permanent load, imposed load and climatic load), entering of loads to the calculation model and calculation of internal forces and deformations. An assessment of the supporting elements and selected joints is also included. There are dynamic design features considered in the calculation. All calculations were performed in accordance with valid ČSN EN standards.
|
guest ::
