|
|
Measurements of the stress in the turbine spiral casing using the strain gauges
Dokoupil, Pavel ; Pochylý, František (referee) ; Habán, Vladimír (advisor)
The Master‘s thesis is focused on measuring of the stress in the spiral case of water turbine using the strain gauges measurement. It contains the theoretical and the practical part. The theoretical part includes a description of theoretical background (basic mechanics, measurement and evaluation, strain gauges, pressure measurement, uncertainty of measurement). One of the chapters describes Water Power Plant Lipno nad Vltavou (history of power plant, issues and the history of measurement). The practical part contains a theoretical calculation of measurement uncertainty and measuring of stress on spiral case Francis turbine at Water Power Plant Lipno I (Unit TG2). Measurement was made before and after overhaul. There are described technical data of spiral cases, description of measurement, results of measuring of strain and stress including comparison with the pressure in spiral case and calculation of uncertainties of measurement.
|
|
| |
|
|
Expressing uncertainty of accurate lenght measurement II
Šrámek, Jan ; Pernikář, Jiří (referee) ; Koška, Petr (advisor)
This diploma thesis is supposed to inform readers interested in the distance measurements uncertainty on practical issues connected with the solving of these troubles when utilising a frequently used calibration method - the Tesa NPL measure instrument. This measuring was implemented by the Czech Metrologic Institute, where the author works; therefore he could take advantage of his rich experience as well as experience of his superiors and colleagues. The author regards the national metrological institute (CMI) as a sufficient guarantee for the hereinafter presented materials, both regarding the professional qualification and from the perspective of formal rightness of this thesis.
|
|
|
Expressing uncertainty of measurement
Adamec, Martin ; Vdoleček, František (referee) ; Koška, Petr (advisor)
Master´s thesis is focused on measurement uncertainty problems, particularly on the uncertainty determination and then on the practical application. The thesis is divided into three parts. A theoretical part deals with issues concerning uncertainties on the theoretical level, transition from the measurement error to the measurement uncertainty. This part also clarifies the basic terms concerning this issues based on “ČSN ISO 5168” standard and another legislative materials. The other part is focused on temperature regulations by thermostatic heads and valves. This part also handles thermostatic heads and valves history, division, generally use and legislative background represented by standard „EN 215“. Practical part follows previous sections. I am determining the measure uncertainty of thermostatic heads and valves flow characteristic determining device. All the results and knowledge obtained are given in the conclusion of the thesis.
|
|
| |
|
|
Calibration management of gauge
Šmétka, Miroslav ; Doňarová, Jana (referee) ; Koška, Petr (advisor)
This thesis solves procedures of the management of the calibration laboratory to prove agreement of calibration results in specified types of gauges. These are gauge blocks (Johansson gauge), vernier height gauge, deformation manometer pressure and torque spanner. Furthermore designs documentation in accord with metrological confirmation. These are mainly calibration procedures of these gauges and procedures of definition measurement uncertainly and interpretation of results. Completed procedures of calibration are processed as attachment to this thesis with graphic design like as in experimental technician institute of ground forces.
|
|
|
Uncertainties Analyze of Indirect Measurement
Fišr, Petr ; Janečka, Jan (referee) ; Vdoleček, František (advisor)
This diploma thesis is engaged with problems of expressing measurement uncertainty especially for indirect measurements. This issue is shown here on a few simple examples. Part of this work is a calculation module for the determination of measurement uncertainties, applied to the role of the laboratory 'measurement of the flow orifice.
|
|
| |
|
|
ANALYZIS OF THE PROCESSING MACHINE CAPABILITY IN BUS PRODUCTION
Gregor, Jaroslav ; Oliva, Zdeněk (referee) ; Pernikář, Jiří (advisor)
The diploma thesis deals with an analysis of the processing machine capability in bus production. The goal is to evaluate the capability of the CNC laser processing machine in conditions of Iveco Czech Republic, Ltd., Vysoke Myto. In the theoretical part, the thesis studies measurements and capability of the processing machine; the practical part describes the present state of production and suggests a solution of the assigned task.
|
|
|
Accuracy of measurement on workshop microscope
Pernikář, Václav ; Jarošová, Jana (referee) ; Bumbálek, Leoš (advisor)
This thesis deals with the performance of the measurement accuracy in the optical measuring systems. The first part describes basic principles of metrology and the guidelines of the expression of uncertainty and the factors which influence measurement result. The second part classifies optical measuring systems and describes some measuring principles of them. The final part compares two optical gauges and the evaluation of some of their characteristics through the use of very simple experiments.
|
guest ::
