|
|
AC power supply with remote control
Štěpnička, Martin ; Papica, Petr (referee) ; Kubíček, Michal (advisor)
The project describes the design of controlled inverters or power generator simulating one phase of European or American distribution network. The generator is able to enter into an output signal of a certain fault conditions designed to testing the electromagnetic compatibility of connected devices. The text is divided into three main chapters. The first one deals with the design of the power generating low-frequency signal. The second part describes the power source used for this generator. In the third section describes the program management unit. End of text summarizes the results. The annex contains a schematic designs and printed circuit boards.
|
|
|
230 V inverter for isolated mains supplied from solar cells
Michálek, Pavel ; Procházka, Petr (referee) ; Martiš, Jan (advisor)
In this thesis is presented detail design of power part of DC/DC converter and output inverter. This device will serve for creating an artificial network in a family house where it will be used for supplying selected household appliances which are designed for use in AC network. The converter will be supplied with DC voltage. This tension will be obtained from a system of photovoltaic panels. The output voltage will have alternate character and it will be close to the network voltage 230 V/50 Hz. In the introductory part of thesis are discussed possible topologies of converters and output inverters. Subsequently are designed individual parts of supply inverter. In the final part there are shown waveforms of important values and is given a thesis evaluation.
|
|
|
Combined use of solar energy
Zeman, Miroslav ; Novotný, Jan (referee) ; Matoušek, Antonín (advisor)
This thesis focuses on the combined use of solar energy. The solar conditions in the Czech Republic are listed in the first part. Further, there is the classification of solar collectors focusing on certain types and detailed description of the solar system scheme. The second part discusses the principle of photovoltaic and its historical development considering panels from the first mentions up to the present. The third part is aimed at the selection of the appropriate object and determination of its power consumption. The following chapter discusses the appropriate connection of the photovoltaic systems, the first connection containing only one inverter, the second containing two low-power invertors. The chapter also contains the connection of the solar system and a description of the individual components considering all schemes. The last chapter includes the technical-economical assessment of the whole project and the calculation of the payback period in case of photovoltaic systems.
|
|
|
DC/AC inverter for small asynchronous machine
Pavlík, Ondřej ; Patočka, Miroslav (referee) ; Červinka, Dalibor (advisor)
The aim of this Bachelor thesis is to propose three-phase converter of low power 100W for driving the asynchronous motor. The device is suitable for construction with fans. This proposal was optimized in light of close price and of technical practicability. The arrangement is possible to use in less exacting applications where it was guarded high price of common converters so far. For allocation catalogue scheme were chosen acceptable components and designed the board of printed circuits.
|
|
|
Study of connectivity for PV power station
Krejčí, Tomáš ; Bartošík, Tomáš (referee) ; Mastný, Petr (advisor)
Bachelor‘s thesis focused on studying connectivity of PV plant into the distribution system.. The first parts are processed by the conditions of connection of new resources into the distribution system with a focus on photovoltaics. Individual points are taken from the rules of the road grid, which gives the Energy Regulatory Authority. In the second part is given FVS problem. There is a brief history of photovoltaics. More details are described photovoltaic element, its principles, and different types of PV article composition PV panel. There are presented methods of operation FVS. The last section is designed to PVP via PC software.
|
|
|
Project of Photovoltaic Power Plant Grid Connection
Blažek, Tomáš ; Procházka, Aleš (referee) ; Orságová, Jaroslava (advisor)
This bachelors thesis deals with photovoltaic technology and economic evaluation of used technology equipment. The first part describes the technology for extraction of power from photovoltaic sources - transformer 22/0,4kV and its basic parts. Then there is the calculation of the amount of openings for cooling the transformer according to ČSN 33 3240. The second part focuses on the description of the major part of the photovoltaic plant. Here are divided solar panels on the material from which they are produced and the type of installation in the field. Next is describe the types of inverters, their principles and functions. The last part compares the different types of transformers and operating costs over the lifetime of plants (20 years), are described factors for proper selection of inverters and solar panels.
|
|
|
Independent Traction Drive with Low-Voltage Induction Machine
Matucha, Tomáš ; Skalický, Jiří (advisor)
This work deals with creation of an exact mathematical model of a traction drive with low-voltage induction machine (28 V) which is fed from accumulators. This model was developed in MATLAB – Simulink and consists of induction machine model, inverter model and load model. Vector Control was added to models connected together. This complex model allows considering many effects into simulations. These effects are commonly neglected, although they have significant influence on drive behaviour, especially by using low-voltage machine. It is impact of magnetic circuit saturation, impact of temperature and skin effect on winding resistance, impact of inverter nonlinearities such as on-state voltage drops on switching elements, dead times and transistors switching times. The attention was paid to determination of losses in drive parts. The correctness of the model was verified at laboratory workplace established for this purpose. The laboratory drive can be controlled by a microprocessor or by using MATLAB and dSPACE application. The influence of compensations of inverter nonlinearities and DC-link voltage ripple on higher harmonics of inverter output currents was analyzed. Furthermore, the control, which decreased resistive losses, was solved.
|
|
|
Frequency inverter for small induction machine
Pavlík, Ondřej ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
The aim of this diploma thesis is to continue in prototype realization and a final proposition of three-phase frequency transformer pilot projected in scope of my bachelor work. This transformer is outlined for a small unsynchronized engine to 100 watt output and is designed to supply the fan motor. This suggestion was optimalized from the standpoint of bargain low price and technical feasibility. Powerful part of transformer is solved with help of circuit FSB50450 which is fed from compact source MYRRA 47155. Steering system is guaranteed with circuit MC3PHAC. This device is possible to use in less demanding applications where it was resisted by high expensive price of common frequency transformers.
|
|
|
Operation of a distribution system with resistance welders
Zelený, Miroslav ; Šlezingr, Jan (referee) ; Drápela, Jiří (advisor)
This Diploma thesis deals with assessment of the influence of two fundamental types of resistance welders operation on chosen power quality parameters at the point of common coupling (PCC) of the power network. The assessed parameters of power quality are the total harmonic distortion of the supply voltage, asymmetry of the supply voltage and the level of short term flicker at the point of common coupling. The assessment is based on the comparison of the results of computer simulations done in PSCad 4.2.0 with the requirements of technical standards. The outcome of this thesis is the determination of allowable limits for physical and operation parameters for the general arrangement of a power distribution network and a resistance welder that should guarantee the power quality compliance.
|
|
|
Characteristic of photovoltaic system
Pokorný, Marek ; Dolenský, Jan (referee) ; Vaněk, Jiří (advisor)
The aim of this work is informed first about photovoltaics universally, works to inform the photovoltaic panels and complete plants. The work also includes instructions on how to implement PVP in accordance with law. Another part is the rough draft of the photovoltaic power 30 kWp, which can be placed on the house, computation and calculation of investment and them profitable investments to time. Design is made in two separate forms of the Fronius Solar and Sunny Design, their outputs are compared. The practical part of this work cooperates with the company SOLARTEC Ltd. for experimental measurements of the photovoltaic system and develop a methodology for setting the properties of real solar systems in operation from the measured data then stored in a database. These data further evaluate and compare the similar operating conditions. This data will show as the course of production of electricity during the typical day in percentage terms, depending on the incident irradiance, cell temperature, angle of incident radiation, etc. We can compare what it looks like an ideal day in terms of production of photovoltaic power, with the other days. Further are in work mentioned histograms achievement panel behind classical day and behind all - time investigation.
|
guest ::
