|
|
Detached House with Atelier in Hořice
Svoboda, Jiří ; Nováková, Tereza (referee) ; Kalousek, Lubor (advisor)
The bachelor’s thesis deals with the projection of a detached house with an atelier in Hořice. Hořice is a small village located 7kms from town Blansko, which has almost 20,000 inhabitants. This building is situated in author’s village, and therefore the local conditions in terms of construction are very well known. The building was placed in a real plot opposite the place where the author lives. The house has two floors, one floor is a partial cellared. The cellared part is accessible from the street (east side). In the southern part of the basement is designed atelier - a commercial space accessible to the general public. In the northern part there is a garage for two cars and the side entrance to the detached house. The ground floor is a private space for housing. The upper floor is 5+KN. The house has no problem to accommodate a family about 5 members, and also it’s able to accommodate some visitors or grandparents. The rooms are comfortably designed and offer a lot of use for a modern family life. The main entrance to the detached house is through the outdoor staircase. The building is made out of brick, perimeter walls of the lower floors are made of concrete blocks and the top perimeter walls of burnt bricks from the clay. Both floors connect the reinforced concrete staircase. The house is covered by a flat roof. Exterior doors and windows are from aluminum. The building is clad by travertine blocks. The building is connected to the necessary engineering networks. The project documentation is developed in accordance to the decree of the building documentation.
|
|
|
Detached house with private office
Landecký, Tomáš ; Janda, Martin (referee) ; Kacálek, Petr (advisor)
The objective of this thesis is to draw up the design documentation for the construction of a detached house with private office. Object is a basement with garage for two cars. The building has two floor and one grand floor with garage for two cars. The building is set in sloping terrain. Load-bearing structure is formed by formwork Best and structural system by Porotherm. The building is coverd by saddleback roof and walkable green roof.
|
|
| |
|
|
Timber Frame House
Juhászová, Michaela ; Hlásková, Michaela (referee) ; Králová, Zuzana (advisor)
This bachelor’s thesis deals with design of a timber frame house situated in the cadastral area Čechovice u Prostějova, region Prostějov. It is a detached house standing in existing resident area. It is designed for a family of four. The house has two storeys and inbuilt garage. There is the shed roof. It is designed as a timber frame construction with Rigidur boards.
|
|
|
Low-Energy Timber Detached House
Král, Jakub ; Hučík, Michal (referee) ; Králová, Zuzana (advisor)
The aim of my bachelor thesis is a project of new low-energy detached house with garage, two-floor house without cellar. The building is covered with flat green roof. The structural system is composed of timber I-joists Steico. Detached house consists of one housing unit of category 5+1.
|
|
|
Timber Detached House
Kozel, Tomáš ; Hlásková, Michaela (referee) ; Králová, Zuzana (advisor)
The aim of the bachelor thesis was to design a detached house with a garage. The building is solved as a frame construction. The detached house is roofed partly by a flat roof and partly by a hounch roof. When designing the object the accent of its funcionality was emhasized and the proposition of the energetically economic object.
|
|
|
Family House
Lorencová, Andrea ; Šímová, Zuzana (referee) ; Matějka, Libor (advisor)
This project deals a new building of detached house in Kosov u Jihlavy. The aim of this work is the preparation of project documentation for construction of building. The new building is designed permanent housing for four member family. The building has two floors and a basement. The system of building is a wall, executed masonry technology of pramic blocks Porotherm. The building is designed with monotube flat floor. The building is on a a gently sloping terrain.
|
|
|
Detached house on a lake
Sedláčková, Markéta ; Vránová, Lenka (referee) ; Kacálek, Petr (advisor)
The subject matter of my Bachelor thesis is the project of a new single-family detached house situated on a lake. The building has two over-ground floors and is covered by a flat double-coated roof. Spacious terraces accessible from both the first as well as the second floor are the integral parts thereof. Vertical load bearing and non-load bearing walls are designed from Porotherm walling system. Horizontal load bearing ceiling constructions are designed from an iron-concrete construction. The load bearing first floor terrace construction shall consist of a welded steel construction. The large diameter piles foundation construction is designed from an iron-concrete construction. The wall footing construction of piles, load bearing pillars and slab floating the building construction is designed from underwater iron-concrete construction. The project emphasizes the layout plan, thermal technical properties and safety in use.
|
|
|
Detached house with ordination
Pobořil, Petr ; Drozd, Ondřej (referee) ; Kacálek, Petr (advisor)
The theme of the bachelor´s work is a detached house with ordination in Brno, Zábranského ulice. The building is designed as a three-storey, without a basement, with the garage. The external walls are made of the bricks filled with a mineral wool. The ceilings are precast-monolithic. The roof of the house is flat.
|
|
|
Masonry house
Kovář, Jan ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
The aim of this bachelor thesis which is called „ A brick – built detached house“ is to create documentation for carrying out construction. The house is designed for a four – member family. It is situated in a suburb of Velké Němčice. The building has been designed as a detached house with two floors and no basement. The first floor consists of two parts – a technical and active one. In the technical part, there is a garage for a car, workroom, technical room, closet and staircase. In the active part, there is a living room with dining room, kitchen and entrance leading to the terrace. On the second floor, there is a closet, bathroom, drying room, separate toilet and three rooms. The load – bearing wall is made of brick breeze blocks Porotherm. The ceiling is made of POT girders and ceiling inserts Miako. Part of the house is covered with a single pitch roof with an agle of inclination of 15° made of a tin roof covering Lindab and the second part is made of a flat roof from a sloped wedge.
|
guest ::
