|
Calandering of li-ion electrodes and its impact on the final capacity of lithium-ion cell
Svoboda, Lukáš ; Kazda, Tomáš (referee) ; Čech, Ondřej (advisor)
There is an effort to produce lithium-ion batteries with maximal density of energy, or higher capacity of cell with the same size. Calendaring of electrodes is important part of manufacturing of batteries. Its parameters, mainly the pressure of calendaring and with it related the final compression ratio of electrode layers, affect parameters of battery significantly. It is the process of pressing electrode material coated on current collector with certain pressure and it reduces its porosity and thickness. The aim of this bachelor thesis is determination of suitable level of calendaring that increases specific capacity, but does not reduce its cyclability.
|
|
Electrochemical impedance spectroscopy as a nanostructured bioelectrodes characterization method
Vrbová, Eva ; Urbánková, Kateřina (referee) ; Hrdý, Radim (advisor)
Diploma thesis deals of nanostructured surfaces, nanoparticles and electrochemical characterization methods such as cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy. The aim of this thesis is a theoretical research issues of production and characterization nanostructured modified electrodes. The practical part is the production of biomodified nanostructured electrodes by anodi- zation W/Al layers with galvanic deposition of gold or deposition of mercury, a modifi- cation of the electrodes by 11-mercaptoundecanoic acid and by bovine serum albumin (BSA). The thesis includes SEM images of nanostructured electrodes contact angle mea- surements of these electrodes and form an electrical circuit with subsequent simulation waveforms.
|
|
Evaluation of electrochemical characteristics of AZ61 magnesium alloy processed by squeeze casting
Pikner, Jan ; Hadzima, Branislav (referee) ; Fintová, Stanislava (advisor)
Bachelor thesis deals with the characterization of electrochemical corrosion properties of AZ61 magnesium alloy prepared by squeeze casting method. The theoretical part of the work focuses on properties of AZ61 alloy, influence of alloying elements on magnesium alloys and corrosion. The practical part of the work deals with electrochemical characteristics of AZ61 alloy with different surface condition in of 0.1 M NaCl solution. Corrosion potential (Ekor) and corrosion current density (ikor) were determined by potentiodynamic test. Polarisation resistance was determined by electrochemical impedance spectroscopy. Based on the measured results was discussed the influence of production, chemical composition, structure and surface treatment (grinding and polishing) on corrosion characteristics of the alloy.
|
|
Spray-coated working electrodes of electrochemical sensors
Lechner, Filip ; Majzlíková, Petra (referee) ; Prášek, Jan (advisor)
This thesis is about the selection of the better type of thick film working electrode for the detection of substances in aqueous solutions, modified by spray coated carbon nanotubes. The theoretical part of this thesis describes the technology of thick film, properties and production of carbon nanotubes, introduction to electrochemistry and electroanalytical methods for the detection of substances in aqueous solutions. The practical part is aimed to realization of the working electrodes by thick film technology and their modification by spray-coated layer consist of carbon nanotubes. Electrodes are characterized using voltammetric methods, electrochemical impedance spectroscopy and electron microscopy. In conclusions is selected the most suitable type of working electrodes for reproducible electrochemical analysis.
|
|
Nanopatterned alumina-based materials for electrochemical sensors and biosensors
Kynclová, Hana ; Hynek, David (referee) ; Trnková, Libuše (referee) ; Prášek, Jan (advisor)
The doctoral thesis is focused on basic research and development of nanostructured surfaces prepared using anodic alumina material. Various types of gold nanostructured surfaces and nanoporous aluminum membranes for electrochemical sensors and biosensors were prepared using the anodic oxidation method. Nanostructured surfaces were prepared by electrochemical anodization of aluminum material to form hexagonally arranged nanopores. Gold was then deposited into the nanoporous masks by electrochemical reduction from potassium dicyanoaurate solution using a pulse deposition method. The prepared nanostructured gold surfaces were electrochemically characterized by electrochemical impedance spectroscopy and voltammetry. Temperature stability and the effect of annealing on their electrochemical behavior at atmospheric pressure as well as in the vacuum were investigated. Then, gold nanostructures of various dimensions were prepared and the influence of their shape and dimensions on the electrochemical behavior was studied. Nanostructured surfaces were also modified with 11–mercaptoundecanoic acid, and the effect of this modification on the electrochemical results was studied. In the last part of the work, nanoporous aluminum membranes were prepared, and their permeability was studied.
|
|
Measurement module based on electrochemical impedance spectroscopy intended for hydrogen fuel cell research
Přecechtěl, Vít ; Pazdera, Ivo (referee) ; Procházka, Petr (advisor)
This thesis deals with diagnostic fuel-cell parameters using electrochemical impedance spectroscopy. The document begins with brief explanation of fuel-cell operation and its basic principles. Thesis continues with description of fuel-cell voltage generation and influence of charge dual-layer on impedance. After that electrochemical impedance spectroscopy, signals used for perturbation and evaluation of impedance spectrum using Bode a Nyquist plot is described. Next part explains measurement of impedance spectrum using potentiostat in combination with lock-in amplifier or frequency response analyzer. Practical part of thesis is dedicated to electric circuit design of EIS module and software designed for automatic measurement of impedance spectrum. Last part shows results of EIS module testing.
|
|
Impedance spectroscopy characterization of perovskite solar cell materials
Křečková, Jitka ; Vanýsek, Petr (referee) ; Novák, Vítězslav (advisor)
The Master‘s thesis deals with the topic of perovskite solar cells with the main focus on the materials used for the active layer. In the introductory part, the electrical and optical properties of halide perovskites are described and specific examples of perovskite crystals are introduced. The description of impedance and photoimpedance measurement methods used for characterization of perovskite solar cells is also included in the thesis. The measurement of electrochemical impedance spectroscopy was conducted on four perovskite crystals and equivalent circuit was formed to fit the obtained data. Parameters of the circuit elements were acquired using the fitting method and were further evaluated in experimental part of this thesis.
|
|
Study of intercalation properties of electrode materials based on expanded graphite
Vencelides, Lukáš ; Máca, Josef (referee) ; Libich, Jiří (advisor)
The diploma thesis deals with the issue of electrochemical cells and deals in detail with lithium-ion batteries. The thesis describes the history of development of lithium-ion batteries, basic information about lithium and basic types of electrochemical cells. The work is devoted in detail to the description of characteristics and operating principle of lithium-ion batteries with emphasis on the negative electrode and negative electrode materials. Of the negative electrode materials, both the most widely used material graphite and modern materials with a great potential for the future are described. In the measurement methods the work describes methods CV, GCPL and EIS. Great emphasis is placed on the explanation of the principle of the function of electrochemical impedance spectroscopy and its application in measurement of electrochemical properties of materials used in lithium-ion batteries. There is also described the procedure of calculation of diffusion coefficients using the results of electrochemical impedance spectroscopy. In the practical part, two methods are used to calculate the diffusion coefficients of lithium ions into the negative electrode made of expanded flake graphite using the results of a series of electrochemical measurements.
|
|
Corrosion protection of ZE10 and ZE41 magnesium alloys with fluoride conversion coatings
Matějka, Lukáš ; Tkacz, Jakub (referee) ; Fintová, Stanislava (advisor)
The diploma thesis deals with preparation of fluoride conversion coatings and evaluation of electrochemical corrosion characteristics of magnesium alloys ZE10 and ZE41 in SBF solution. The main aim of the work is to increase the corrosion resistance of the investigated magnesium alloys using fluoride conversion coatings. The influence of the conditions of the preparation of the conversion coatings on their morphology and the corrosion resistance of the coated alloys will be studied. The electrochemical corrosion characteristics of the magnesium alloys with conversion coatings will be evaluated by potentiodynamic and electrochemical impedance spectroscopy.
|
|
Preparation Techniques and Characterization of Electrodes with Nanostructured Surface
Hrdý, Radim ; Trnková, Libuše (referee) ; Janderka,, Pavel (referee) ; Hubálek, Jaromír (advisor)
Nowadays, nanostructures fixed on solid substrates and colloidal nanoparticles permeate through all areas of human life, in area of sensors and detection as well. This dissertation thesis deals with the fabrication of nanostructures on the surface of planar electrodes via self-ordered nanoporous template of aluminum trioxide. The nanofabrication, as one of many possible techniques, is used to increase the active surface area of electrodes by creating unique surface types with specific properties. These electrodes are very perspective in the applications, such as biomolecules electrochemical detection and measurement. The transformation of aluminum layer into non-conductive nanoporous template in the process of anodic oxidation is a fundamental technique employed to obtain the array of nanostructures in this thesis. The fabrication of high quality nanoporous membranes with narrow pore size distribution on various types of metallic multilayers is one of the key experimental parts in this work. Several problems associated with the production of the thin-film systems, including the dissolving the barrier oxide layer, are discussed and solved. Another part of this work deals with the use of nanoporous membrane as a template for the production of metallic nanostructures via electrochemical metal ions deposition directly into the pores. The obtained nanostructures as nanowires, nanorods or nanodots are characterized by the scanning electron microscopy and energy-dispersive or wavelength X-ray spectroscopy. The electrode surface, modified by gold nanostructures suitable for the detection of biomolecules, has been chosen for the electrochemical measurements, due to the gold biocompatibility. The nanostructured electrodes were characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The effect of nanostructured surface geometrical parameters, including the size of the electrochemically active area, on the results of electrochemical measurements has been observed and compared to flat gold electrodes. Two model biomolecules, namely guanine and glutathione, have been chosen for the study of potential application of these nanostructures in biosensors.
|