|
|
Design of selected parts of RC and masonry structures
Neužil, David ; Šulák, Pavel (referee) ; Švaříčková, Ivana (advisor)
Bachelor thesis describes the design selected part of reinforced concrete and brick construction on building of wine cellar and elaboration of reinforcemenet drawings of selected structural element. Building is decided to two parts entrance building and wine cellar. At the entrance are designed and assessed reinforced concrete perimeter walls, columns and beam which is situated on columns. In the cellar was assessed ceiling formed by a brick vault which failed to report and was designed rehabilitation using reinforced concrete reverse shell. Calculation of internal forces was performed by computer program SCIA Engineer.
|
|
| |
|
|
The sport hall in Třeboň
Kadlček, Dan ; Štrba, Michal (referee) ; Šmak, Milan (advisor)
The aim of bachelor´s thesis is design and assessment of bearing structure two-aisle multipurpose sports hall in Třeboň, which is designed from timber or steel. The main aisle is rectangular floor plan 26x45 m. The proportions of secondary aisle are 10x43 m. The main bearing structure causes as a frame or saddle truss supported by columns. Solid frame is made from steel, glued-laminated timber truss is solid, frame truss is made from solid timber or steel. Steel structure is made from steel S235, timber structure is made from solid C24 or glued-laminated GL24h timber. Purlin is designed from solid timber or steel.Columns are designed from glued-laminated timber or steel. Static analysis has been accomplished by student version of the SCIA Engineer 2011 software.
|
|
| |
|
|
The steel roof structure of a hall
Havíř, František ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
The aim of this bachelor’s thesis is to design the steel roof structure of a sport hall in the area of city Olomouc. The plan dimensions of the hall are 55,0 x 35,0 m and height is 15,0 m. The solution is chosen from two preliminary variants. The roof construction is on the cross-section formed by the unbalanced circular arc. The main load bearing structure is created by planar circular lattice frames with height 1,8 m, which are hinged on the columns at one side, and on the other side tailed to the underlying structure. Between main bearing arches are solid purlins, which are radially arranged. Spatial solidity is provided by transverse and longitudinal bracings.
|
|
|
Footbridge
Smělíková, Petra ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
The topic of my Bachelor's thesis is a static assessment of a bearing structure of a current footbridge which is also used for cycling. It is placed in Kunovice near Uherské Hradiště. The length of span is 28 meters. Its construction is solved as space framework with through-span. Main beam is truss structure with upper saddle flange. The height of beam in the middle of the span is 2.5 meters and above supports is 1.5 meters. The calculation is done either by hand or using calculation program Scia Engineer 2012.0.
|
|
|
The storage hall
Urbánek, Jan ; Šmak, Milan (referee) ; Puchner, Josef (advisor)
The subject of this bachelor's thesis is to design the steel roof structure of storage hall in the area of Třebíč city. The plan dimensions of the structure are rectangural 43.200 x 27.850 m. The height of the structure is 8,150 m. The hall is design with gable roof. The main load bearing structure is comprised by an arch frame. The width of the frame is 24.000 m. The spacing of the frames is 4.200 m. Thje frames are connected with purlins. The longitudal rigidity of the structure is provided by transverse wind braces, purlins and walers. The roof covering is composed of sandwich roof panels laid directly on the purlins. The cladding is composed of sandwich wall panels. Along the storage hall is a covered ramp.
|
|
|
Steel hall structure for industrial production
Bém, Miroslav ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The aim of the bachelor thesis is design and assessment of the double aisle steel hall structure for industrial production in Moravské Budějovice. The hall has rectangular ground plan and it is 30m (18 m and 12 m) wide and 56 m long. There is trolley crane inside in the buinding with a lifting capacity of 12,5 tones. The main bearing components are trusses, solid poles, bracings and thin-walled purlins.
|
|
|
The roof structure of a bus station with facilities in Vrchlabí
Vondráček, Vít ; Hron, Lukáš (referee) ; Šmak, Milan (advisor)
The subject of bachelor's thesis is design and assessment of steel load-bearing construction of bus station in Vrchlabí. It is designed as a co-operating load-bearing steel pillar based structure with the construction of the outdoor platform. The design was considered in four different options for inner building. Followed was mainly the weight of inner structure with respect to the roof deck. The selected option is then incorporated into the scope of the entire structure. Design and assessment was conducted in accordance with the applicable standards and by using a computer program Scia Engineer.
|
|
|
Reinforced concrete aeration tank
Vlach, Jakub ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
The aim of this work is to design and static analysis features open embedded aeration tank wastewater treatment plants, in particular the assessment base plate and exterior walls. On the basis of reports is prepared drawings consisting of reinforcement drawings and drawing shapes. The proposal was made on the values of the internal forces of the outputs of computer program SCIA Engineer 2012-Student Edition.
|
guest ::
