|
|
Physics Simulation for Pinball Game
Čermák, Jakub ; Polok, Lukáš (referee) ; Zachariáš, Michal (advisor)
The objective of this work is to create a library for physical simulation and using the library to create a game of pinball, on which you can test functionality of the library. Problems that appeared during the creation of the library, are described in this paper along with their solutions. In particular, tunneling, detection and results of collisions. Subsequent optimization solutions to these problems for our specific library. Of no smaller importance are principles which reduce the requirements of the final simulation. Among the most important ones are the correct choice of limits, detection of rolling and sleep of slowly moving dynamic objects.
|
|
|
Design of rolling mill for flexible single chamber tubes
Maštera, Lukáš ; Tůma, Jiří (referee) ; Blecha, Radim (advisor)
The Project is a masterpiece of Bachelor degree undergraduate of the Mechanical Engeneering at University of Technology in Brno and in general points out the basic problems associated with constructional plan of the forming machine for flexible pipe production. The Project contains the preview of production of the pipes and problems with designing the machine mainly the forming wheels draft
|
|
|
HEAT – MECHANICAL DEGRADATION OF SURFACES AT THE HIGH TEMPERATURES
Zahradník, Radek ; Hajduk, Daniel (referee) ; Čecho, Ladislav (referee) ; Toman,, Zdeněk (referee) ; Raudenský, Miroslav (advisor)
The Ph.D. thesis is focused on a surface degradation mechanisms under combined heat and mechanical load. The objects of examination are work rolls from hot rolling mill which suffer such a load. In first chapter, the hot rolling process, the design, the manufacturing process and present materials of work rolls are described. The state-of-the-art study of work roll surface degradation mechanisms – wear, oxidation, thermal and contact fatigue are described in the second chapter. The characterization, the formation, the mechanisms of progression and the effects of each surface degradation mechanism is described step by step. The state-of-the-art study of analytical and numerical models which are related to hot rolling process is described in third chapter together with their limitations and flaws. The next chapters contain design of an analytical, an optimized macroscopic and a microscopic model for study of the work roll stress state. The macroscopic and the microscopic model is based on finite element method and they are implemented in ANSYS Programming Design Language. The models are used to process several case study which are based on previous experimental work of the Heat transfer and fluid flow laboratory. The results from case studies specify and expand the knowledge of work roll stress state. The results show the portion of each loading factor on the whole stress state. In addition, time and depth depended distribution of stress state is presented. The results from macrosferic model illustrate the cause of spalling and a rupture of the work roll. The results from the microsferic model show the cause of creation of the to-surface-parallel cracks within carbides of high chromium irons. Last chapter summarized of all results gathered from case studies together with the goals for further research definition. The necessary steps for further cognition are stated. The thesis contains a large set of appendixes with deeper discussion of several related topics. These appendixes represent the one third of whole the thesis.
|
|
|
Construction of rolling machine of steel sections
Křivohlávek, Pavel ; Pavlík, Jan (referee) ; Matějka, Petr (advisor)
The aim of this thesis is to design steel beams bending machine. In the introduction, is characterized by a bending machine and carried out research costs, including factory-produced manufacturers. Followed by a proposal of alternative solutions, evaluating them and selecting the most appropriate conception. The next section is described in detail the proposed model, including stress analysis of loaded parts. The thesis also examined the safety of a forming machine, prepared an analysis of possible defects and their consequences in the design. Finally, it created the design documentation on the proposed machine made pricing and maintenance described rolling machine.
|
|
|
Technology for bending unsymetric profile of steel
Walach, Lukáš ; Matušková, Jarmila (referee) ; Dvořák, Milan (advisor)
The present thesis deals with the determination of procedural parameters of given bending profile including the calculation of spring-back, especially the bending force. It compares the differences and the benefits of two different technologies of producing a blank, the simple bending and the technology of rolling. The technological process suggested involves technical-economical evaluation, supplemented with the drawing documentation.
|
|
|
Solution Technology for Manufacturing "Slats"
Lamich, Štěpán ; Jaroš, Aleš (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis deals with a technology problem of the blind slat production. The work describes the slat production in the automatic rolling mill TPLv4 made by ISOTRA a.s. It aims to find the critical point of the production and suggest a new manufacturing technique/procedure. In conclusion, the thesis evaluates the proposed manufacturing procedure from technical and economical point of view.
|
|
|
Study of fatigue life of roller bearings type 6204 -2Z
Poláček, Vojtěch ; Svoboda, Petr (referee) ; Klapka, Milan (advisor)
This bachelor thesis deals with the basic description of produced by fatigue failure of ball bearings. In the paper there is a description of basic diagnostic methods of machine parts. Following there is a study of vibration, their recording and the evaluation concerning bearing lifetime. The aim of the experimental part of the paper is to check the functionality and suitability od the VDT2000 analyzer and VDT Control Center software, both made by company VidiTech, s.r.o. together with the SA67 laboratory experimental stations owned by the Department of Design at Faculty of Mechanical Engineering, which were used for examining the 6204-2Z bearings. The aim of the lifespan exam is to confirm the reliability of the bearing failure warning by the analyzer and to assess the ability to record the first stages of bearing damage.
|
|
|
Study of bearing noise regarding accuracy of machining
Studýnka, Pavel ; Sabo, Karol (referee) ; Klapka, Milan (advisor)
This bachalor thesis deals with connection between the quality of surface of raceways of a bearing and vibrations in operation. This thesis describes basic geometrical parameters of a bearing that have main influence on its resulting quality and vibrations. It presents methods to evaluate the quality of the raceways surfaces and their connection between them. As a part of the thesis is an experiment, which should prove, what is the connection between the measuring of quality of the surface of raceways and measuring the vibrations of bearings during the process, by the way used in the company KOYO Olomouc. The quality of raceways is evaluated on a measuring device MUK-F 300 and vibrations on IL 100R/2000.
|
|
|
Manufacturing of tubes by forming
Szczygiel, Pavel ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
This thesis deals with the basic methods of manufacture of tubes, especially focuses on the technology of seamless tubes. Assess the appropriateness and inappropriateness of individual production methods used and presents technology and types of lines used in practice. It describes in detail process of production seam pipes with a diameter of 116 mm and a length of 97 m in the plant ArcelorMittal Tubular Products Karviná a.s. Also describes in detail each operation in the working section of the strip preparation, welding and is reduced.
|
|
|
Design of rolling mill for flexible single chamber tubes
Maštera, Lukáš ; Tůma, Jiří (referee) ; Blecha, Radim (advisor)
The Project is a masterpiece of Bachelor degree undergraduate of the Mechanical Engeneering at University of Technology in Brno and in general points out the basic problems associated with constructional plan of the forming machine for flexible pipe production. The Project contains the preview of production of the pipes and problems with designing the machine mainly the forming wheels draft
|
guest ::
