|
|
Rodinný dům
Kováčová, Nour ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
Předmětem této bakalářské práce je projektová dokumentace a návrh nového rodinného domu s téměř nulovou spotřebou energie. Dům je určen pro šest členů rodiny s překladatelskou kanceláří pro jednoho z členů rodiny. Dům se nachází v klidné části obce Jinačovice, v okrese Brno v Jihomoravském kraji České republiky. Tento objekt je samostatně stojící se dvěma patry, dvěma balkony a velkou okolní zahradou. Svislá nosná konstrukce domu je zděná z keramických tvárnic Porotherm. Vodorovná nosná konstrukce je vyrobena z předpjatých stropních panelů Spiroll. Budova je postavena na základech ze betonových pásů. Střecha je plochá se střešnímí deštovými vpustmi a izolací z minerální vlny. Budova je zateplena systémem ETICS. Projektová dokumentace obsahuje také posouzení požární bezpečnosti budovy, výpočty základů a zatížení, tepelně technické posouzení a posouzení na akustiku a denní osvětlení.
|
|
|
Detached house with business premises
Češka, Ondřej ; Průša, David (referee) ; Sukopová, Dáša (advisor)
The aim of my bachelor thesis is to design and elaborate project documentation for building of a family house with a design office. The building of the family house is located in the cadastral area of Mikulovice near Pardubice. It is a two-storey, partly basement detached house, which corresponds to the conditions of operation of the building. The family house is designed for a family of four. On the 1st floor there is a WC + bathroom with a technical room and a gym. On the 1st floor there is a design office, which is intended for the homeowner, then a kitchen, a living room, a guest room with its own dressing room, a workshop connected with the garage. On the 2nd floor there is a living area consisting of three rooms and a studio. The structural system of the building is designed from the POROTHERM system with an external contact insulation system ISOVER GREYWALL with a thickness of 120 mm. Vertical load-bearing peripheral structures of 1st floor, 1st floor and 2nd floor will be made of POROTHERM 30 P + D. The inner bearing walls are made of POROTHERM 30 P + D and POROTHERM 19 AKU and POROTHERM 11,5 PROFI are used for non-bearing masonry. The exterior plaster is a CEMIX FLEXI thin-film, water-repellent, fluted with 2 mm grain in light gray. The staircase is designed with reinforced concrete monolithic. The horizontal load-bearing structures consist of the ceramic-concrete system POROTHERM (beams Pot and inserts Miako) th. 250 mm. The roof is gabled with TONDACH Hranice 11 roofing in black. Doors and windows are designed in gray and white, garage doors are designed in gray. Floor coverings are designed taking into account the use of individual rooms, namely ceramic tiles and laminate flooring. The main goal of my work was to solve the disposition for the given purpose, ie to design a suitable construction system and to draw up the drawing documentation including the text part. The bachelor thesis is processed in the form of project documentation for construction.
|
|
|
Manufacture of aquariums
Lebedev, Ilya ; Myslín,, Jiří (referee) ; Boleslavská, Yvona (advisor) ; Brzoň, Roman (advisor)
The bachelor thesis deals with documentation for obtaining a building permit approval and documentation for building aquarium factory. The work is based on earlier created study of the subject AG033. Bukovany is a village in Hodonín district in the South Moravian Region of the Czech Republic. This plot is almost near the eastern border of the village. The land is sloping, relatively narrow and long. The shape of the estate greatly influenced the location of the building and the connection to the existing roads. There is good availability for supply and shipping. The factory is divided into four above-ground interconnected buildings with different functions. All objects are without basement and have only one floor. On the southern side of the plot is located a representative administrative part of the building, which surrounds the main factory building. It is possible to drive into the main production hall by a truck and to handle large and heavy glass panes by means of a bridge crane. The manufacturing process of gluing has high demands on the illumination of the premises, therefore it is illuminated by the Lightway Maximus roof skylights and the windows around the perimeter of the hall. This production hall is directly connected to the warehouse and joinery space. The construction system of the production objects is prefabricated, based on monolithic nibs. The part of the building, which serves as a warehouse has a brick walls. The eastern and most sloping part of the plot is filled with greenery. There is an artificial small lake in front of the administrative part of the building.
|
|
|
Family House
Uhrová, Anna ; Horáčková, Michaela (referee) ; Klimešová, Jarmila (advisor)
The bachelor thesis deals with design of family house on real estate in Říčany u Brna. The house without cellar has one floor and residential attic. The load-bearing structure consists mainly of Porotherm ceramic system, the house is covered with a gable roof.
|
|
|
Family house
Kouřil, Tomáš ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
This bachelor’s thesis deals with project of a new house with an establishment, which is situated in the cadaster unit of the Down of Boskovice. The house is two-floor, basement with disabled garage for two cars. The house is designed for a four-member family and in 1S located office. House’s walls are build with blocks Porotherm profi 30 and are insulatedwith a contact thermal insulation system. The horizontal construction are consist with POT beams and ceiling inserts MIAKO. Family house have one-cloak flat roof. This bachelor’s thesis has the form of design documentation for the building process.
|
|
|
Family house
Mach, Stanislav ; Brezovský, Jindřich (referee) ; Hlavačka, Tomáš (advisor)
The subject of this bachelor´s thesis is two-storey family house with basement and garage and with a gable roof where the second floor is attic. The house is designed to be built with the classical construction technology and the system Porotherm is used in the floors and formwork „Best“ in the basement. The layout of the house is designed for a family of 4 members.
|
|
|
Detached house with a coffee bar in Kroměříž
Skopalová, Vendula ; Kučera, Radim (referee) ; Štěpánek, Ladislav (advisor)
The subject of this bachelor's thesis is to design and process a construction-technical part of construction realisation documents of a new family house with two flats and a café in Kroměříž. The building is located on a flat land and comprises of a partial basement and three above ground storeys. A garage for both flats is designed in the project. The building is covered by a saddleback roof with concrete roofing. Vertical load bearing structures are made of the Porotherm system. In addition to its own project, it also includes an architectural conception, fire safety report and thermal and technical assessment of the house.
|
|
|
Apartment building
Barglová, Karolína ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
A subject of bachelor thesis is a new apartment building and the processing of the design documentation for construction. The apartment building is located in a quiet part of a town Zubří, near the city center. The surrounding area consists mainly of apartment buildings. This object is detached with a cellar and four floors. There are spacious maisonettes in the third and fourth floor, which have terraces in the fourth floor. A car park is located close to the building. In immediate proximity there is established a wheelchair access to the object via an outdoor lift. Vertical supporting structures in the above-ground floor are made of ceramic blocks Porotherm, in basement they consist of blocks of permanent formwork. The horizontal structures are prefamonolithic, they are made of ceramic beams and ceramic inserts Miako. The building is based on concrete foundation strips and the top of the building is a warm flat roof.
|
|
|
Kindergarten
Šišková, Šárka ; Klímek, Karel (referee) ; Čuprová, Danuše (advisor)
The subject of this thesis is the preparation of project documentation kindergarten. The building is situated on flat terrain in Kromeriz. This is a kindergarten consisting of two objects. SO01 building has two floors, with two departments for children and the economic part, SO02 single-storey building with one department for children. The building will be based on the footings of plain concrete C 20/25. Priming concrete slab will also unreinforced concrete C20 / 25, equipped with curry networks with a diameter of 6 mm and a mesh size of 150x150 mm. Perimeter, internal bearing partition walls and floors are designed from the system POROTHERM, the upper part of the foundations is made of shuttering blocks BEST 500x300x250 mm. The insulation system is designed BAUMIT ETICS. The horizontal structure of the ceiling is solved keramobetonovým ceiling Porotherm (POT beams and inserts MIAKO) thick. 250 mm. The staircase is designed reinforced concrete. The chimney will be built from the system SCHIEDEL ABSOLUT a ventilation shaft. The roof consists of extensive vegetation flat roof.
|
|
|
Family house with an establishment
Grepl, Adam ; Král, Jakub (referee) ; Čupr, Karel (advisor)
THE BACHELOR'S WORK IS A FAMILY HOUSE IN THE TOWN KROMERIZ WORKING OPERATOR. BUILDING HAS TWO FLOOR FLOOR AND PARTIAL GROUNDING. HOUSE HAS AN APARTMENT FOR FIVE PERSONS AND A TWO PERSONNEL OPERATOR. THE OBJECT HAS A POROTHERM SYSTEM. COMBINATION OF FLOOR ROOFS BEYOND THE OPERATING AND SADDLE ROOF BEYOND THE CIVIL PARTS. BASES FOUND BASIC BELTS.
|
guest ::
