|
|
Non-contact Temperature Measurement
Lata, Miroslav ; Janečka, Jan (referee) ; Vdoleček, František (advisor)
The object of this bachelor thesis was to create a study of development non-contact temperature measurement and show methods of measurement in infra-red radiation area. The beginning of this work is focused on major notions and definitions necessary to introduce non-contact temperature measurement topic. Other interest of this work was to mention possible error rate of measurement, it’s reasons then name some ways of calibration of a measuring equipment with it’s reasons too. Last part of this thesis was focused on a practical using of these measuring devices.
|
|
|
Numerical model of ultrasonic oil level sensor
Chutný, Pavel ; Bílek, Michal (referee) ; Vyroubal, Petr (advisor)
This master’s thesis verifies physical principle of ultrasound in fluids by numerical model. At first, ultrasound study is ment. In second theoretic part, diferent kind of motor oils are described. Next, equations for numerical simulation are presented. In practical part, numerical model of level sensor is examined in well-knowed fluids (water, air). Results of laboratory measurement on topic of ultrasound velocity in oil dependent on temperature are aplicated on numerical model of sensor and optimalized.
|
|
|
Methodology of temperature measurement behind jet engine
Koutný, Martin ; Koštial, Rostislav (referee) ; Matějů, Jiří (advisor)
This thesis is focused on temperature measurement behind jet engine. The theoretical part introduces chosen ways of temperature measurement. The practical part is divided into design (and later assembly) of the measuring stand, methodology of measurement and the measurement itself. The main outcome are heat maps gained by measuring temperatures behind TJ – 42 jet engine.
|
|
|
Additional reinforcement of wood elements
Janoušek, Radek ; Vejpustek,, Zdeněk (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals with the possibilities of additional reinforcement of wooden elements using different types of BFRP materials. In the practical part, an experiment of reinforcing plywood with external reinforcement using BFRP fabrics with different basis weights was performed. As part of the strength tests performed, the specimens were subjected to bending and shear stresses. To verify the bonding quality of the plywood, the bodies were exposed to the effect of elevated temperature and a delamination test was performed to determine the bonding quality of the plywood joints. The achieved values were evaluated and compared with the available literature.
|
|
|
Wireless temperature sensor with high temperature warning indicator
Dvořák, Petr ; Petržela, Jiří (referee) ; Hruboš, Zdeněk (advisor)
This thesis deals with a proposal of a wireless temperature-sensitive element at high temperature. It analyses some different variants of the temperature sensors. Furthermore, the thesis describes the Industry Science Medical (ISM) bands, in which it will be possible to communicate with the wireless communication modules. These wireless modules are discussed and described. By the devices „the transmitter and the receiver" it is focused on the communication of the microcontroller Atmel with the wireless modules, with the temperature sensors, microswitches on the control and display unit (LCD).
|
|
| |
|
|
Properties of metal layers realized with vapour deposition
Milichovský, Miloš ; Švecová, Olga (referee) ; Šandera, Josef (advisor)
This work deals with vacuum evaporation of metals, basic principles of this technology and exploring the properties of the resulting layer. It describes how vacuum evaporation works and its individual parts.The main part deals with evaporation of copper and other substances and the conductivity of the resulting film in relation to its thickness. As a parameter for measuring substrate temperature is specified.
|
|
|
Monitoring stress in the mast
Bednář, Tomáš ; Beneš, Petr (referee) ; Bejček, Ludvík (advisor)
The subject of this bachelor´s thesis is an issue of measurement and monitoring stressing in the mast – high voltage and very high voltage.The solution of query, including the producer and the users, is also presented. The aim of this thesis is to propose sensors for this measurement and making practical measurement of the concrete very high voltage mast.
|
|
|
Utilization of absorption systems in the heating systems
Vidlák, David ; Špiláček, Michal (referee) ; Pospíšil, Jiří (advisor)
Main goal of this work is familiarization with basic features of absorption heat pumps and it’s growing importance on the market. In the first part of the work there is a research for clarifying facts associated with such pumps. In the introduction there are descriptions of basic information from the field of heating industry and its connections to our systems. Next there is a brief analysis of price changes in electricity and heat in the last five years. Main part of the analytical section is a description of the used absorption system. Second part of the work is focused on the calculation of the absorption system itself. First there is calculated internal and external part of the device according to the parameters from GE Power s.r.o. After this step there are parametric studies based on changes of key parameters of the default device for a demonstration of the behavior of a heating pump. In the end of the work there is a integration of the unit into the heating cycle for variations including flue gas condenser and using a cooling water from the turbine condenser.
|
|
|
Power measurement in ultrasound fields
Škůrek, Pavel ; Čížek, Martin (referee) ; Rozman, Jiří (advisor)
This work is focused on the developement of a sensor, which enables to measure the ultrasonic power by heat effect of the mechanical Wales. The princip of two basic kinds of thermoacoustic sensor is descibed here – one level and two level sensor. This work also contains a proposition of these sensors with description of each parts and a trial to find suitable absorber. Achieved results, which support the function of the sensors are presented here by form of graphs and tables. Measuring by thermoacoustic sensors is confronted here with measuring of ultrasonic by hydrophone, which is used as reference measuring.
|
guest ::
