|
|
Brno Trade Fairs Future
Mičková, Markéta ; Hybská, Bohumila (referee) ; Sedláček, Michal (advisor)
The diploma thesis follows the urban planning analysis of the BVV area, which was elaborated in the subject TG02 –Specializovanýateliér. The Diploma Project processes an architectural study of the hotel with a congress center. The request for the proposal was the classification of the building into First Class (**** hotel) according to the Official Uniform Classification of Accommodation Facilities of the Czech Republic, as well as the number of rooms 250. The congressional part should serve more than 2,000 persons. The design responds to the historical urbanism of the BVV area, where it retains and optically complements the view axis to the Z-pavilion. The building also reacts to the height next to the standing mansion. In its close proximity is the lower part of the building with the congress center, the height part with rooms is located on the opposite side, at the sports hall. The object is optically divided into two parts - a lower base and a "growing" height part with room. The congress and the hotel part are optically separated by planing offsets and façade solutions. Lower, congress, part orbit horizontal aluminum lamellas, instead, the hotel creates vertical lamellas. These lamellas serve not only as optical separation but also as shading.
|
|
|
Hotel "U Prehrady"
Černý, Dávid ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subject of this diploma thesis was to process the study and the design documentation for a newly built hotel in Brno, in city district “Kníničky” near the artificial dam “Přehrada” in a rest area. The hotel will serve as temporary accommodation for up to 64 hotel guests in single, double and four bed rooms. The object also contains training rooms, offices, a meeting room, a café, a small grocery store and a restaurant with kitchen. Parking is possible in one of the two mass garages and there is an outdoor parking possibility in front of the hotel too. The building has a cast-in-place concrete frame with longitudinal beams and sway bracings. The external wall consists of aerated concrete bricks with contact thermal insulation system ETICS (insulation material mineral wool), the ceilings will be cast-in-place reinforced concrete ceilings and the roof flat green roof or flat roof with gravel on it above the 5th floor. The foundation construction consists of reinforced concrete foundation strips, which expand to foundation pads under the load-bearing columns and will be supported by piled foundations under the most exposed elements. As long as the hotel is situated into a fairly steep slope, the vertical alignment of some building parts is various so part of the project is the design of landscaping works. Design documentation was processed using the program AutoCAD 2017, the study and the visualization using both SketchUp 2015, LayOut 2015 and Lumion 5.
|
|
|
Residential Building
Melo, Jaroslav ; Spáčil, Miroslav (referee) ; Brukner, Bohuslav (advisor)
Diploma thesis solves the new building in Nitra. The building is located on Kmeťová street. The building has four floors above ground and one underground and the Garage. 1st floor is clinic. Other floors are for apartments .. The structural system is a monolithic reinforced concrete and brick. The building is covered with a flat roof. Foundation structure consists of reinforced concrete block.
|
|
|
Implementation of the gross substructure of a residential building in Jihlava
Mironiuková, Iveta ; Venkrbec, Václav (referee) ; Vlčková, Jitka Laura (advisor)
The object of the bachelor thesis is a coarse substructure of the apartment building. This building is eight-storey building. Three floors are garages and five floors are flats. The building is in the courtyard of a former factory TESLA at Jihlava. The bachelor thesis mainly deals with the stages in which there are processed technical regulations: earthwork and foundation of the building. The bachelor thesis also addresses building equipment, scheduling, itemized budget, proposal of mechanical assembly, inspection and test plan and safety and health protection during the work.
|
|
|
Apartment house, Na Větrníku
Schmidt, Jan ; Krupica, Roman (referee) ; Müller, Jan (advisor)
The final thesis is focused on a design of an apartment house and processing of the design documentation. Designed building is situated on the periphery of the town Chrudim in the locality of the housing estate Na Větrníku. It’s a detached house with five floors and a basement. Building has a rectangular plan with dimensions 30,92 × 17,17 m. The foundation of the building is designed as a combination of piles and strips. The vertical constructions will be made of the clay blocks. The floor structures are designed as cast-in-place reinforced concrete floors. The apartment house has a saddle roof with a slope 15°. There are 25 apartments in the building and the mass garages for 15 cars, which are situated in the basement. The garages will serve to the residents of the house.
|
|
|
Multifunctional building Litomyšl
Kovář, Lukáš ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
Diploma thesis deals with the design of the multifunctional building located between Havlickova and F. Vogner streets in relation to the existing building in Litomyšl. Building plot is slightly sloping, at the rear goes into greater inclination. The building has four aboveground floors and one underground floor. The building includes services, located in ground floor, administrative premises decomposing in the second and third floor and apartments on the top floor. In the basement are located parking spaces. Supporting skeleton of the building is a cast-in-place concrete frame. Roofs are designed as a flat single shell. In part of roof over third floor is a green roof. The building is founded on piles. Due to the occurrence of water pressure is building an extra solved waterproofing system with checks and activation. The work includes text messages, drawings for building construction, fire safety design, construction and physical assessment of building structures and specialization from concrete structures.
|
|
|
Multifunctional building
Reif, Tomáš ; Pospíšil, Tomáš (referee) ; Pěnčík, Jan (advisor)
The thesis is a project of a multifunctional building in Olomouc. That is the detached house with a rectangular ground plan, one underground floor and four above-ground floors. In the basement there are public parking garages, an technical room and an engine room of the ventilation. On the first floor there is a cafe and a copy center and the separate entrance for owners of the residential units. There are nine separate residential units on the second to the fourth floor. The house is based on the monolithic footings. The vertical supporting structure are formed by the basement walls in a combination with the monolithic reinforced concrete columns. Horizontal supporting structure is designed from the ceiling panels SPIROLL. The building is covered with flat single-roof construction with a drainage inward disposition.
|
|
|
Multifunctional building
Dvořák, Jakub ; Chládek, Ladislav (referee) ; Drobeček, David (advisor)
Dissertation on multifunctional building which is a part of a project which is about a transformation of an industrial district into a residental district with an additional function of shops and services including relaxation zone which is planned on the roof terrace. The dissertation is divided according to the legislation and made in the extent of the documentation of the building.
|
|
|
Tracking Air Pollutants by Using Wireless Sensor Network
Válek, Tomáš ; Šimek, Václav (referee) ; Tříska, Vít (advisor)
This thesis discusses design and production of a prototype of a device and implementation of a firmware for this device. Its function is to wirelessly monitor a concentration of pollutants like carbon monoxide and propane-butane in an atmosphere. Motivation is to allow parking of vehicles with engine gaseous fuels in underground collective garages for public use according to ČSN 73 6058 standard. The prototype of the device has been designed so that it could be used not only in collective garages but also in garages of family houses. The device was successfully designed, produced and programmed so that it can be deployed in real-world conditions.
|
|
|
The Office Building Brno-Husovice
Karlík, Štěpán ; Kalivoda, Tomáš (referee) ; Kalousek, Lubor (advisor)
This diploma thesis deals with a new built office building in Brno-Husovice. The building is situated in a gap site on the street Dukelská třída. The building has four aboveground floors and underground garages. The ground floor is divided into relaxation area and a commercial section with five shopping units. The second and the third floor are designed as a variable office space. The engine room for ventilation is situated on the fourth floor. Construction system is cast-in-place concrete frame. The building is roofed with the green roofs. Foundations are made of large diameter drilled piles.
|
guest ::
