|
|
Rheological properties of binders
Hotař, Petr ; Fišer,, Jiří (referee) ; Kudrna, Jan (advisor)
The comparison of rheological properties (complex shear modulus and phase angle and dynamic viscosity) of four paving bitumens and two polymer modified bitumens is performed in this diploma thesis. Furthermore, the empirical tests (needle penetration and softening point) were determined on these binders. Effect of asphalt binders aging was modeled using RTFOT test and modified RTFOT test (3 x RTFOT).
|
|
|
Study of rheological properties of concrete with the addition of low-temperature plasma treated polymer fibers
Gromeš, Vít ; Herka, Petr (referee) ; Bodnárová, Lenka (advisor)
Polypropylene fibers are used in concrete mixtures to avoid early cracks during shrinkage. Low thickness of each fiber and low density are reasons, why these fibers are effective in small dosage. Their disadvantages are smooth surface and hydrophobic character of polypropylene, thus it is necessary to improve their surface for better spread during mixing and to reach needed adhesion between fibers and cement paste. In present time are using chemical solutions applied on surface of the fibers to provide better water absorption, but the trend is reducing of using chemicals in industry and this situation demands new technology. There is possible solution, polypropylene fibers treated by low-temperature plasma. This method was developer by cooperation Masaryk University in Brno with company KrampeHarex and Brno Universiry of Technology. The goal of this thesis is to bring comparison, of influence on rheology properties of fresh concrete, between admixed the fibers with applied chemical layer and low-temperature plasma treated polypropylene fibers.
|
|
|
Uncertainties of measurements of the dynamic viscosity
Januš, Petr ; Rozsívalová, Zdenka (referee) ; Frk, Martin (advisor)
The thesis is deal with measuring the temperature dependence of dynamic viscosity and the calculation of measurement uncertainties. The thesis writes up the physical nature of viscosity and rheological properties. Next it is write up an overview of possible methods for measuring viscosity of liquids and overview of methods for measuring the density of liquids. An important chapter is the statistical evaluation of measured data represented mainly measurement uncertainties. In the practical part of the work is done workplace for measure the temperature dependence of dynamic viscosity. It is used two methods of measuring viscosity of liquids and two samples of liquids. Finally is done statistical evaluations of measurement. Based on the calculated measurement uncertainty measurement methods are compared.
|
|
|
Preparation and characterization of self assembled polymer nanocomposites
Lepcio, Petr ; Žídek, Jan (referee) ; Jančář, Josef (advisor)
Polymerní nanokompozity na bázi polyhedrálních oligomerních silsesquioxanů (POSS) představují slibnou oblast výzkumu, která potenciálně může využít samouspořádávní při navrhování nových materiálů. Tato diplomová práce popisuje postup přípravy oktafenyl-POSS/PS, oktafenyl-POSS/PMMA a oktamethyl-POSS/PS systémů a charakterizaci jejich termomechanických vlastností v pevné fázi a reologických vlastností v roztoku. Získané výsledky jsou diskutovány s přihlédnutím k teoriím zabývajících se stavem disperze nanočástic.
|
|
|
Study of physical gels with hydrophobic domains
Kovářová, Lenka ; Márová, Ivana (referee) ; Mravec, Filip (advisor)
The thesis is focused on physical hyaluronan gels. The object of study is the interaction of hyaluronan (HyA) with oppositely charged surfactants in physiologic solution (0.15 M NaCl), leading to the formation of gel. In the first part of work have been determined the solids´ contents (X) in gels and their supernatants in percentage and their correlation with molecular weight concentration of original HyA solution and the ratio of binding sites on hyaluronan chain and surfactant CTAB. To conclude, decrease in HyA concentration results in higher values of X and vice versa. On the other hand, increase in the value of X with increasing molecular weight of HyA is not so significant. Analogous conclusions have been made for supernatants and the amount of solids in gel. Drying process has been recorded by drying curves. Swelling process has been used for the characterization of gels. The percentage of water that can be absorbed by dried gel, was determined. The results are in agreement with the measurements of solids´ content in gels. In the next part, the correlation between rheological properties of gels and HyA concentration, HyA molecular weight and concentration of CTAB have been studied by the oscillation and flow tests. The samples with the highest molecular weight and concentration have the most viscoelastic character. The flow test confirmed the assumed pseudoplastic behavior of gels. A very interesting trend arose while comparing HyA concentrations and viscosity in stock solutions and gels. Whereas in stock solution viscosity (at low shear rate) is lower with increasing of HyA concentration, the situation was exactly the opposite in gels. The results are in agreement with frequency tests and observed character of gels.
|
|
|
Interaction between surfactants and hyaluronan with different molecular weight.
Vašíčková, Kamila ; Lehocký,, Marián (referee) ; Pekař, Miloslav (advisor)
The behavior of the system consisted by mixture of two different molecular weight hyaluronates and surfactant was investigated. Mixtures were 17 kDa hyaluronate with 1,46 MDa, 73 kDa with 1,46 MDa, 300 kDa with 1,46 MDa, 806 kDa with 1,46 MDa and 1800 kDa with 1,46 MDa. These compounds were always mixed in the weight ratios 70:30, 50:50 and 30:70. As the surfactant cetrimonium bromide and TWEEN 20 were used. Interactions were studied in aqueous solution with different ionic strength. Sudan red was used as hydrophobic dye. In all experimental series with cetrimonium bromide was observed phenomenon of discontinuous separated phases, described as pearls. Samples containing pearls were tested on stability, were dried and rehydrated back, as were also heated in solution. Subsequently, the particle size was measured in the remaining sample after pearls were filtrated. Mixtures of hyaluronate were characterized by measuring the viscosity using rheology microrheology. It was found that these compounds are heterogeneous and each sample point is not the same viscosity.
|
|
|
Rheological properties of biodegradable thermosensitive copolymers
Chamradová, Ivana ; Poláček, Petr (referee) ; Vojtová, Lucy (advisor)
Hlavním cílem předložené diplomové práce byla příprava, charakterizace a reologická studie "inteligentních" injektovatelných hydrogelů, které jsou biodegradovatelné, biokompatibilní a s řízenou životností sestávajících se z hydrofilního polyethylenglykolu (PEG) a hydrofobního kopolymeru kyseliny polymléčné a polyglykolové (PLA/PGA). Výsledný termosenzitivní PLGA–PEG–PLGA kopolymer, který geluje při teplotě lidského těla, byl dále funkcionalizován anhydridem kyseliny itakonové získané z obnovitelných zdrojů, přinášející jak reaktivní dvojné vazby tak i funkční –COOH skupiny na konce kopolymeru. Navíc byl PLGA–PEG–PLGA kopolymer modifikován bioaktivním anorganickým hydroxyapatitem pro použití jako injektovatelné kostní adhezivum. Oba modifikované kopolymery jak ITA/PLGA–PEG–PLGA/ITA tak i PLGA–PEG–PLGA/HAp ovlivňují reologické vlastnosti původního PLGA—PEG—PLGA kopolymeru rozhodující o tom, zda by mohly být nové polymerní materiály vhodné jako injektovatelné nosiče léčiv nebo kostní lepidla v lékařských aplikacích. Experimentální část této práce je zaměřena především na charakterizaci viskoelastických vlastností jak nemodifikovaného PLGA—PEG—PLGA kopolymeru tak i s přidáním ITA nebo HAp metodou obrácených testovacích vialek (TTIM) a dynamickou reologickou analýzou. Výhodou TTIM je vizualizace přechodu sol-gel, určení kritické gelační teploty a kritické gelační koncentrace. Reologická měření poskytují informace o viskozitě a vizkoelasticitě gelu změnou elastického (G´) a ztrátového (G´´) modulu. Připravené kopolymery byly také charakterizovány 1H NMR a GPC. Povrch a velikost částic HAp byl popsán pomocí SEM a laserového analyzátoru částic. Původní PLGA—PEG—PLGA kopolymer i kopolymer modifikovaný ITA a HAp vykazovaly sol-gel přechod vyvolaný zvýšením teploty. Reologické vlastnosti kopolymerů v koncentračním rozmezí 6 až 24 hm. % ve vodě byly studovány buď TTIM nebo užitím reometru a získané výsledky spolu velmi dobře korespondovaly. Reologické vyhodnocení prokázalo dvě „překřížení“, kde G´ =G´´. První překřížení velmi dobře korespondovalo s prvním sol-gel přechodem nalezeným prostřednictvím TTIM. Maximální hodnota G´ odpovídající nejvyšší tuhosti polymerního gelu byla situována v bílém gelu. Druhý fázový přechod představuje přechod mezi gelem a suspenzí, kdy je bílý polymer oddělen od vody. Tuhost gelu roste s rostoucí koncentrací polymeru ve vodě. Pro srovnání, kopolymer modifikován jak ITA, tak i přidáním HAp (0, 10, 20, 30, 40, 50 hm %) vykázal zvýšení tuhosti gelu oproti původnímu kopolymeru PLGA–PEG–PLGA a přiblížení teploty maximální hodnoty G´ tělesné teplotě (37 °C). Bylo prokázáno, že jak ITA/PLGA–PEG–PLGA/ITA kopolymer tak i PLGA—PEG—PLGA/HAp kompozit jsou vhodnými kandidáty na injekovatelné systémy pro řízené uvolňování léčiv či kostní adhezivum pro ortopedii nebo zubní aplikace.
|
|
|
New methods of protonated aminoacids preparation and their interactions with polyelectrolytes
Trojan, Martin ; Sedlařík,, Vladimír (referee) ; Chytil, Martin (advisor)
This Master thesis investigates the interaction between the polysaccharide sodium hyaluronate (HA) and some amphiphilic molecules. It is known that the presence of the carboxylic group on HA and the aminogroup on the amphiphiles leads to electrostatic interaction between these two compounds. This supposal offers the possibility to physically modify HA and use it as a new type of a carrier of bioactive compounds, for example medicals. However, successful carrier of bioactive compound has to resist a certain value of ionic strength. The high-molecular weights HA (1.75MDa) and amphiphile lysine were chosen for the study of the influence of ionic strength on the system HA – amphiphile. Our results show that system HA – amphiphile system is suppressed even by low concentrate solution of electrolyte. Therefore the system was reinforced by protonation of the aminoacid. The results show, that the interactions were reinforced, nevertheless negative influence of chlorine anions had to be eliminated by lyophilization. The solutions with strengthened system HA – amphiphile were used for the research of ionic strength influence. The amphiphiles lysine, 6 - aminocaproic acid and arginine were selected for this study. The interactions were investigated by means of reometry and conductometry.
|
|
|
Microrheology in study of biopolmer colloids.
Hnyluchová, Zuzana ; Sedláček, Petr (referee) ; Mravec, Filip (advisor)
A new method for determining the viscoelastic properties of materials was introduced and investigated. Results of three groups of samples obtained using one particle microrheology method, DLS microrheology method and classical rheology method were compared to be sure of correctness of measurements. As a model system were chosen mixtures of glycerol of different viscosities. In case of samples containing glycerol, results were also compared with tabulated values. Hyaluronan of various molecular weights was used as a biopolymer and polystyrene particles were used for microrheology. It was confirmed, that viscosity values of biopolymer samples obtaining by each method are comparable.
|
|
|
Influence of selected active compounds for properties of gel and emulsion cosmetics
Gardoňová, Lenka ; Pekař, Miloslav (referee) ; Zemanová, Jana (advisor)
This master‘s thesis studies problems of chosen active substances in cosmetic emulsions and gels. There is their main characteristics – distribution and properties of cosmetic emulsions and gels, preparation of the active substances, effects on the skin and conditions, which could them influence. In experimental part, preparation of gels and emulsions bases was described which were than enriched by active substances - evening primrose oil, hemp oil, Salvia officinalis extract, Symphytum officinale extract and sea salt. Properties of these cosmetic gels and emulsions bases with the addition of active substances depend on temperature and method of storage, amount of light exposure, method of preparation and another conditions. Action of these factors can cause changes of the stability, thereby the cosmetics effects on the skin can be lost. On the bases of performed rheology measurements (oscillation and flow measurements), pH measurements and sensory analysis were determined, if the properties of examined samples were changed. The measurement was performed in the certain time intervals and the properties were evaluated like at laboratory temperature 23±2 °C, so after exposure to temperature regime 37 °C in thermoregulator. On the basis of performed measurements, there was determined, that gel base with addition of Symphytum officinale extract had the most stability properties.
|
guest ::
