|
|
Voltammetric determination of anilazine on silver solid amalgam electrode
Bystrianský, Martin ; Fischer, Jan (advisor) ; Dejmková, Hana (referee)
Anilazine (4,6-dichloro-N-(2-chlorophenyl)-1,3,5-triazin-2-amine) is a fungicide from a group of triazine pesticides. These have been very widely used but for their toxicity for water environment they are being cancelled. Use of anilazine is not allowed anymore in the European Union. However, traces of its residues are able to find in environmental samples. The diploma thesis deals with determination of anilazine using silver solid amalgam electrode modified by mercury meniscus (m-AgSAE). Differential pulse voltammetry was used. For the determination, an acidic solution is necessary. In the work Britton-Roninson buffer pH = 2 was used. This is because of electrochemical reduction of anilazine (and other triazines) which is started by protonization of heterocycle ring. Anilazine exhibits one single well-defined peak, the potential of the peak was about Ep = -827 mV (vs. 3 mol l-1 argentochloride electrode). The limit of quantification achieved in surface water was 2 µmol.l-1. Other two possibilities of getting lower limit of quantification were examined - Adsorptive Stripping Voltammetry (AdSV) and preconcentration by Solid Phase Extraction (SPE). Using AdSV the limit of quantification LQ = 0,5 µmol.l-1. Conditions of adsorption were as following: Eacc = -100 mV, tacc = 60 s. For SPE, 200-mg columns...
|
|
|
Voltametric Determination of 4-Nitrophenol at a Bismuth Film Electrode
Hausner, Jiří ; Barek, Jiří (advisor) ; Dejmková, Hana (referee)
This Bachelor Thesis is focussed on the study of electrochemical behaviour of 4-nitrophenol (4-NP) and the search for optimal conditions for its voltammetric determination at a bismuth film-modified gold electrode (BiF-AuE). Voltammetric behaviour of 4-NP (c = 1×10-4 mol L-1 ) was investigated using direct current voltammetry (DCV) and differential pulse voltammetry (DPV) in dependence on the pH of the medium used (Britton-Robinson buffers). For both techniques, Britton-Robinson buffer of pH 7.0 was chosen as the optimum medium. Repeatability of the determination of 4-NP (c = 1×10-4 mol L-1 ) was 0.6 % and 0.9 % for DCV and DPV, respectively. Calibration dependences of 4-NP were measured in the concentration range from 1×10-6 to 1×10-4 mol L-1 under the optimum conditions. Attained limits of quantification (LQs) were 7.6×10-7 mol L-1 and 1.5×10-6 mol L-1 for DCV and DPV, respectively. The applicability of the newly developed voltammetric methods for the determination of 4-NP was verified on model samples of drinking water with LQ 7.5×10-6 mol L-1 for DCV at the BiF-AuE and 1.4×10-6 mol L-1 for DPV at the BiF-AuE.
|
|
|
Voltammetric Determination of Herbicide Aclonifen Using Mercury Electrodes
Murcková, Klára ; Vyskočil, Vlastimil (advisor) ; Dejmková, Hana (referee)
Presented Diploma Thesis is focused on electroanalytical determination of the herbicide Aclonifen, which belongs to a group of herbicides derived from diphenylether. These herbicides are used due to their effects - inhibition of protoporfyrinogen oxidase synthesis and also inhibition of biosynthesis of carotenoids. Due to its widespread use in agricultural, toxical effects on humans and because of its negative impacts particularly on aquatic ecosystems there is a need for methods capable of determining the presence of Aclonifen in the environment to monitor its ecological impacts. Optimal conditions for the determination of Aclonifen have been investigated in BR buffer - methanolic solution and in BR buffer. Electrochemical behavior of the substance has been studied using direct current voltammetry (DCV), differential pulse voltammetry (DPP) and adsorptive stripping voltammetry (AdSV) on the hanging mercury drop electrode (HMDE) and by using TAST polarography and differential pulse polarography (DPP) on the dropping mercury electrode (DME). UV/VIS spectrophotometric detection was used for comparison to electrochemical detection. Used wavelengths were 308 nm and 388 nm. For electrochemical determination of Aclonifen the above mentioned techniques were used and following results were obtained: DCV...
|
|
|
Voltammetric Determination of 5-Nitrobenzimidazole Using Non-Traditional Electrode Materials
Chládková, Barbora ; Vyskočil, Vlastimil (advisor) ; Zima, Jiří (referee)
5 Abstract This Diploma Thesis is targeted on the determination of 5-nitrobenzimidazole (5-NBIA) using following techniques: DC voltammetry (DCV) and differential pulse voltammetry (DPV). As working electrodes, a silver amalgam paste electrode (AgA-PE), which was constructed for this determination in the form of a new prototype, a bismuth film electrode (BiFE), at which the optimum conditions for the deposition of the bismuth film at a suitable substrate (glassy carbon electrode and gold electrode were tested for this purpose) were initially optimized, and a glassy carbon electrode (GCE) were used. The optimum conditions for the voltammetric determination of 5-NBIA at the AgA-PE (in a medium of Britton-Robinson buffer (BR-buffer) of pH 7.0 for both DCV and DPV), at the BiFE with gold substrate (BR-buffer of pH 9.0 for both DCV and DPV; the film was deposited "ex situ" in a stirred plating solution (1000 mg L-1 Bi(III) solution in 0.1 mol L-1 acetate buffer of pH 4.5) for 300 s), and at the GCE (BR-buffer of pH 5,0 for both DCV and DPV). Under these conditions, calibration dependences were measured in the concentration ranges of 0.1 - 100 µmol L-1 (pro DCV a DPV na AgA-PE) and 1 - 100 µmol L-1 (pro DCV a DPV na BiFE a GCE), and the limits of quantification (LQs) were calculated for particular methods: LQ ≈...
|
|
|
Voltammetric Determination of 5-Nitrobenzimidazole at a Silver Amalgam Paste Electrode
Chládková, Barbora ; Vyskočil, Vlastimil (advisor) ; Zima, Jiří (referee)
This bachelor's thesis concerns the determination of 5-nitrobenzimidazole (5-NBIA) by the methods DC voltammetry (DCV) and differential pulse voltammetry (DPV). A silver amalgam paste electrode (AgA-PE), which was prepared for this determination in the laboratory, was used as a working electrode. The optimum conditions for voltammetric determination of 5-NBIA were found and under these conditions, concentration dependences were measured and the limits of quantification (LQ) were calculated for each method. The media of BR-buffer pH 7.0 and pH 5.0 were chosen as optimum for DCV determination of 5-NBIA at AgA-PE and DPV determination of 5-NBIA at AgA-PE, respectively. For both DCV and DPV, the linear concentration dependences were obtained in concentration ranges of 5-NBIA from 2 × 10-7 mol/l to 1 × 10-4 mol/l. The attained LQ were found to be 6 × 10-7 mol/l (for DCV at AgA-PE) and 2 × 10-7 mol/l (for DPV at AgA-PE).
|
|
|
Voltammetric Study of the Interaction of Genotoxic 2-Nitrofluorene with DNA at a Hanging Mercury Drop Electrode
Krejčová, Zuzana ; Vyskočil, Vlastimil (advisor) ; Nesměrák, Karel (referee)
In this Diploma Thesis, an interaction of genotoxic environmental pollutant 2-nitrofluorene with a double-stranded calf thymus DNA has been studied using a hanging mercury drop electrode (HMDE) as an electrochemical sensor. Two types of DNA damage were investigated and electrochemically detected (using cyclic voltammetry and differential pulse voltammetry): (i) The DNA damage caused by the direct interaction with 2-nitrofluorene and (ii) the DNA damage caused by short-lived radicals generated by the electrochemical reduction of the nitro group in 2-nitrofluorene. For the study of direct interaction, HMDE was modified by DNA and the interaction of DNA with 2-nitrofluorene was studied, after their incubation, right at the HMDE surface (adsorptive transfer stripping technique) or the DNA was preincubated with 2-nitrofluorene and, subsequently, the interaction was studied voltammetrically (DNA titration technique). Using both detection techniques, the formation of DNA - 2-nitrofluorene complex was observed and the mutual interaction was interpreted as an intercalation between the DNA base pairs, although such interaction was not clearly confirmed by UV-visible absorption spectroscopy. An electrostatic binding of 2-nitrofluorene on DNA sugar-phosphate backbone was partially formed at low concentrations of...
|
|
|
Voltammetric Determination of Dinitronaphthalenes Using Single Crystal Silver Amalgam Electrode
Tvrdíková, Jana ; Barek, Jiří (advisor) ; Dejmková, Hana (referee)
Voltammetric methods for determination of 1,3-dinitronaphthalene (1,3-DNN), 1,5-dinitronaphthalene (1,5-DNN) and 1,8-dinitronaphthalene (1,8-DNN) using DC voltammetry (DCV) and differential pulse voltammetry (DPV) at novel single crystal silver amalgam electrode (CAgAE) were developed in this work. Developed methods may be used for determination of 1,3-DNN within a concentration range 2 - 10 μmol.L-1 with LoQ 2 μmol.L-1 using DCV and 1 - 100 μmol.L-1 with LoQ 1 μmol.L-1 by DPV; 1,5-DNN wihin a concentration range 2 - 10 μmol.L-1 with LoQ 2 μmol.L-1 using DCV and 1 - 10 μmol.L-1 with LoQ 1 μmol.L-1 by DPV and 1,8-DNN within a concentration range 2 - 10 μmol.L-1 with LoQ 2 μmol.L-1 using DCV and 0,3 - 1 μmol.L-1 with LoQ 0,3 μmol.L-1 by DPV. An attepmt to decrease LoQ by adsorptive stripping differential pulse voltammetry was not successful. Process of electrochemical reduction of selected dinitronaphthalenes on the working electrode was also studied by cyclic voltammetry. This work verified the use of CAgAE as alternative electrode material to mercury electrodes for determination of electrochemically reducible organic compounds in aqueous-methanolic media. Small dimensions of the CAgAE are the main advantages which predetermine its use in voltammetric microvolume batch analysis and amperometric detection in...
|
|
|
Voltammetric and amperometric detection of genotoxic pyrene derivatives at boron-doped diamond film electrode
Yosypchuk, Oksana ; Barek, Jiří (advisor) ; Nesměrák, Karel (referee)
This thesis is concentrated on the optimization of conditions for determination of genotoxic environmental pollutants whitch belong to derivatives of polycyclic aromatic hydrocarbons − 1-nitropyrene (1-NP), 1-aminopyrene (1-AP) and 1-hydroxypyrene (1-HP). All three compounds were determined by differential pulse voltammetry (DPV) at boron-doped diamond film electrode in water-methanolic solutions. Further, 1-AP and 1-HP were determined in a model sample of urine. For this purpose, effective separative techniques such as solid phase extraction and high performance liquid chromatography with reverse phase and amperometric detection at above mentioned type of electrode were used. Limits of detection of all tested compounds in water-methanolic solutions are 9⋅10−8 −3⋅10−7 mol dm−3 using DPV and 1⋅10−8 mol dm−3 for 1-HP and 1-AP in model sample of urine determined by HPLC with amperometric detection.
|
|
|
Study of influence of quantum dots to biological systmes and their components
Koudelková, Zuzana ; Zítka, Ondřej (referee) ; Provazník, Ivo (advisor)
The aim of this thesis is to summarize the available evidence about quantum dots and their effects on living systems. The text describes methods for the preparation of quantum dots with respect to their characteristics (size, fluorescence wavelength) and methods of quantum dots bio-functionalization of biomolecules. In living organisms is a large number of proteins, because these are considered as one of the main components of the interaction of organisms. Therefore, the work also provides basic information about proteins. Finally, there are described various methods by which the quantum dots may be characterized mainly by differential pulse voltammetry measurement zeta potential and fluorescence measurement. The main objective of this work is to propose models of different environments in which will be degradation of quantum dots with regard to the evaluation of acquired kinetic parameters for predicting the stability of individual quantum dots.
|
|
|
Thick-film sensors for heavy metals detection
Polický, Jiří ; Adámek, Martin (referee) ; Prášek, Jan (advisor)
This work covers an area of heavy metals detection using thick-film sensors. Fabrication of screen-printed thick-film sensor and electrochemical analytical methods for detection of chemical elements in aqueous solutions are described in this work. Several commercial and own prepared thick-film pastes were used for carbon based working electrodes. The electrochemical properties of the pastes were examined by cadmium ions detection in potassium chloride solution using differential pulse voltammetry. The best results were achieved on the electrode made of direct grown carbon nanotubes on the electrode layer NM22. A detection limit 20×10-6 mol l-1.was reached with this working electrode material during oxidation process.
|
guest ::
