|
|
Analysis of the factors influencing the geotechnical material parameters of MSW landfills
Sedláček, Václav ; Kudrna, Zdeněk (advisor) ; Slomek, Jiří (referee)
The material of Municipal Solid Waste landfills is a varied mix of materials with different properties. This material changing his properties according the procesing before or after the material is stored in landfill body. While the conditions in the landfill body are suitable, the bacteria start the development of biodegradation process. The process is affected by a number of factors. During the process, a large volume of lanfill gas is released from the landfill body and the landfill surface is declining. Material composition with processing methods during and after the transportation of waste to the landfill create geotechnical parameters of fresh material. As time goes by, this material loses biodegradable ingredients. The biodegradation process takes several years in the space of lanfill body. For the proper process of biodegratation, it's important to compliance next parameters: Sufficient organic matter content, sufficient material moisture and stable temperature with pH. Keywords: Municipal solid waste, geotechnical properties, grain, moisture content, shear strengh, strain, elasticity, deformation, compaction, biodegradation processes
|
|
|
Composite materials and their use in sport
PÍSAČKA, Petr
This bachelor's study pursues the utilizing of modern composite materials in spor-ting sector. It is processed as an instructional text which could be used as a supportive or supplemental subject matter for materials and technology. The study is divided in two main parts which are further sectioned into subchapters. In the introduction of the first part of the bachelor's study the development of composites is explained during the human history. Following chapter mentions the basic characteristics of the composites and presents various definitions of the composites and the term of synergic phenomenon is clarified. The next chapter discusses the most im-portant matrices based on the plastic materials which are divided into reactoplastic ma-trices and the thermoplastic ones. The features of the particular materials and their use in the production are integral part of this study as well as the illustrative pictures. The second part of this bachelor's work is focused on the practical use in the spor-ting industry namely in sporting aviation, skiing, archery, bicycling, canoeing, soccer and to manufacture hockey sticks. The production, practicability, advantages and the imper-fections are stated here as well. The chapter after that shows the price ranges of the abo-ve mentioned sporting equipment in comparison with the conventional and composite materials. The part of the second chapter is about the future of the composite materials and their current and future utilizing. In connection with the future of the composite mate-rials the use of natural fibers are mentioned too.
|
|
|
Mixed lipids and their interaction with biopolymers
Cigánková, Hana ; Smilek, Jiří (referee) ; Mravec, Filip (advisor)
This thesis focuses on the study of interactions between hyaluronan and lipid DOTAP and its mixtures with DPPC in water. First, the aggregation behavior of the lipid itself and its mixtures was measured, afterwards the influence of hyaluronan in different concentration was studied. Further the fluorescence anisotropy of fluorescence probe DPH in these mixtures and influence of cholesterol was measured. These properties were investigated by fluorescence spectoscopy using pyrene and DPH as fluorescence probes. The measurements revealed that the addition of hyaluronan has observable influence on the aggregation behavior of the lipid DOTAP and its mixtures with DPPC and that cholesterol influences liposomes fluidity.
|
|
|
Analysis of the factors influencing the geotechnical material parameters of MSW landfills
Sedláček, Václav ; Kudrna, Zdeněk (advisor) ; Sedláček, Jaroslav (referee)
Geotechnical parameters of material of Municipal Solid Waste (MSW) landfill are very variable. This work searches by science researches the influences for these parameters. The identification of parameters is obviously difficult and needs special devices capable to measurement of big volume of material. Influence for geotechnical parameters have composing of MWS, climatic conditions, of the MSW landfill is cover or not, if has landfill isolation on base and on top or not or if is landfill drained. Important factor is existence of biodegradation processions on landfill. There are important the velocity of biological component and time.
|
|
|
Computational Modelling of Mechanical Behaviour of "Elastomer-Steel Fibre" Composite
Lasota, Tomáš ; Okrouhlík,, Miloslav (referee) ; Nováček,, Vít (referee) ; Burša, Jiří (advisor)
Tato práce se zabývá výpočtovými simulacemi zkoušek jednoosým tahem a tříbodovým ohybem kompozitního vzorku složeného z elastomerové matrice a ocelových výztužných vláken orientovaných pod různými úhly, jakož i jejich experimentální verifikací. Simulace byly provedeny pomocí dvou různých modelů - bimateriálového a unimateriálového výpočtového modelu. Při použití bimateriálového modelu, který detailně zohledňuje strukturu kompozitu, tzn. pracuje s matricí a jednotlivými vlákny, je zapotřebí vytvořit model každého vlákna obsaženého v kompozitu, což přináší řadu nevýhod (pracná tvorba výpočtového modelu, řádově větší množství elementů potřebných k diskretizaci v MKP systémech a delší výpočetní časy). Na druhé straně v unimateriálovém modelu se nerozlišují jednotlivá vlákna, pracuje se pouze s kompozitem jako celkem tvořeným homogenním materiálem a výztužný účinek vláken je zahrnut v měrné deformační energii. Porovnání experimentů se simulacemi ukázalo, že bimateriálový model je v dobré shodě s experimenty, na rozdíl od unimateriálového modelu, který je schopen poskytnou odpovídající výsledky pouze v případě tahového namáhání. Z tohoto důvodu byl hledán způsob, který by umožnil rozšířit unimateriálový model o ohybovou tuhost výztužných vláken. V roce 2007 Spencer a Soldatos publikovali rozšířený unimateriálový model, který je schopen pracovat nejen s tahovou, ale i ohybovou tuhostí vlákna. Představený obecný model je však založen na Cosseratově teorii kontinua a jeho praktické využití je pro jeho složitost nemožné. Proto byl vytvořen zjednodušený model (částečně podle Spencera a Soldatose) s vlastní navrženou formou měrné deformační energie. Za účelem ověření nového unimateriálového modelu s ohybovou tuhostí vláken byly odvozeny všechny potřebné rovnice a byl napsán vlastní konečno-prvkový řešič. Tento řešič je založen na Cosseratově teorii kontinua a obsahuje zmíněný anizotropní hyperelastický unimateriálový model zahrnující ohybovou tuhost vláken. Vzhledem k tomu, že v případě Cosseratovy teorie jsou při výpočtu potřebné i druhé derivace posuvů, bylo nutné použít tzv. C1 prvky, které mají spojité jak pole posuvů, tak jejich prvních derivací. Nakonec byly provedeny nové simulace s využitím vlastního řešiče, které ukazují, že tuhost vláken lze u nového unimateriálového modelu řídit odpovídající materiálovou konstantou. V závěru práce je pak diskutováno, zda je nový unimateriálový model s ohybovou tuhostí schopen poskytnout stejné výsledky jako model bimateriálový, a to jak při tahovém tak i ohybovém namáhání kompozitního vzorku.
|
|
|
Numerical solutions of EMC problems of small airplanes
Šeděnka, Vladimír ; Dědková, Jarmila (referee) ; Mazánek, Miloš (referee) ; Raida, Zbyněk (advisor)
Disertace popisuje současné problémy v certifikaci malých letadel, které by se měly v budoucnu řešit numerickým modelováním. Tento postup má zefektivnit návrh a zlevnit certifikaci letadel. Práce je úzce spjata s projektem HIRF-SE, který se problematikou certifikace letadel numerickými metodami zabývá. Podstatná část práce je věnována popisu dvou modulů pro platformu HIRF-SE: řešič BUTFE založený na metodě konečných prvků v časové oblasti a budicí nástroj BUTFE_EXC. Práce popisuje řešení pohlcujících okrajových podmínek, modelování disperzních a anizotropních materiálů a aproximaci tenkých drátů. Speciální pozornost je věnována řešení aproximace tenkých drátů s ostrými ohyby, jejíž současná formulace způsobuje překryvy mezi jednotlivými segmenty drátu.
|
|
|
Design of optoelectronic sensor for biological tissues
Balík, Zdeněk ; Bartlová, Milada (referee) ; Tománek, Pavel (advisor)
Biological tissues are optically inhomogeneous and absorbent materials. They are comprised of various structures such as cells, cell organelles, and various fiber structures. Due to these structures leads to different interactions with the light and phenomena such as absorption, scattering and polarization of light. Different ultrasonic, electromagnetic, electrical and optical methods are used for meat ageing detection. Muscles are turbid anisotropic media, they exhibit changes in electrical and optical properties according to the direction of the electrical and optical fields in the sample. The diploma work assesses the feasibility of impedance measurements for meat ageing detection and their comparison with optical measurement of scattered polarized light. Two different sample were used: pork chop slices and chicken breasts were used for their relative homogeneity. The electrical method is a promising method due to the possibility of getting much information and realizing cheap and fast enough measurement systems. The proposed optical method allows measure the rotation of polarization plane with meat ageing in the range of 95 degrees within considered period. Through the first promising results obtained in this thesis, a further work has to be provided to determine closer relationship between optical scattering characteristics, electrical anisotropy in ageing-related tissue structural properties.
|
|
|
Quality of hydrophobic domains in polyelectrolyte-surfactant system
Holínková, Petra ; Vala, Martin (referee) ; Mravec, Filip (advisor)
In this bachelor thesis were studied the photophysical properties of four fluorescent probes depending on the viscosity of their surroundings by the fluorescence spectroscopy. For probes DPH, DPB a perylene was determinated dependence of fluorescence anisotropy and for P3P dependence of ratio excimer/monomer on the viscosity of the sample. Anisotropy probes DPH and perylene were also used to study interaction between hyaluronan and cationic surfactant CTAB (concentration below CMC) in aqueous solution and 0,15 M NaCl. Information about forming hydrophobic domains were obtained by measurement of fluorescence intensity and anisotropy depending on the concentration of CTAB in the sample. It was found that in an aqueuos solution, after the initial addition of CTAB to hyaluronan formed small hydrophobic domains linked to chain of hyaluronan. Increasing concentration of CTAB leads to the formation of gel and phase separation. After addition of NaCl leads to reorganization of this system and probably the formation of free micelles in the solution with higher concentration of CTAB.
|
|
|
Microviscosity probes in study of aggregation in a biopolymer-surfactant system.
Vašíčková, Kamila ; Vala, Martin (referee) ; Mravec, Filip (advisor)
The effect of cationic surfactant concentration and ionic strength on anisotropy of fluorescence of probes diphenylhexatrien and fluorescein has been investigated in the system of cationic surfactant and in the system of cationic surfactant and hyaluronan. The investigation has been done by fluorescence emission spectroscopy. Obtained anisotropy gives information about microviscosity of investigated systems. Subsequently the system of cationic surfactant and hyaluronan has been investigated by 9-(2-carboxy-2cyanovinyl)julolidine, 4-(dicyanovinyl)julolidine and 1,3-bispyrenylpropane probes. The information about the microviscosity of the system gives the integral under the emission curve of 9-(2-carboxy2-cyanovinyl)julolidine and 4-(dicyanovinyl)julolidine and the ratio between excimer and monomer of 1,3-bispyrenylpropane. It has been discovered that the ionic strength influences the anisotropy of diphenylhexatrien and fluorescein only in the fist addition of salt (concentration 0,025 mol dm-3) and that addition of hyaluronan influences the anisotropy of diphenylhexatrien and fluorescein only in samples without addition of salt. Results of measurment with 9-(2-carboxy2-cyanovinyl)julolidine and 4(dicyanovinyl)julolidine describe the formation of aggregates of catinoc surfactant with hyaluronan and characterize these aggregates from the point of microviscosity.
|
|
|
Static analysis of the timber roof structure
Sedlák, Petr ; Gratza, Roman (referee) ; Kytýr, Jiří (advisor)
This thesis with the numerical modeling and assessment has been carried timber roof structure of the gymnasium hall of the elementary school TGM at Bílovec. The study was realized in program system ANSYS. They are created a variety 2D and 3D numerical models which are assessed according to current normative regulations.
|
guest ::
