|
|
Sports center with restaurant in Holěšov
Fridrich, Michal ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.
|
|
|
Multifunction sports hall
Nacházel, Jakub ; Burianová, Lenka (referee) ; Smolka, Radim (advisor)
This master’s thesis deals with the design documentation multifunction sports hall. The building is situated in the region in the Vysočina village Humpolec, cadastral district Humpolec. The building is designed as a prefabricated skeleton, where the vertical load-bearing structures are designed from the prefabricated skeleton of PREFA BRNO and filling and partition walls of the structural system POROTHERM and BTB fittings. Horizontal structures are formed by the supporting elements prefabricated skeleton system of PREFA BRNO and ceiling panels SPIROLL. The main single-storey multifunction hall is roofed with wooden trusses of curved from glued laminated timber and purlins carrying roof deck. The other part of the building is covered with flat single-ply roofs. The building is divided into a main single-storey multifunction sports hall and an outbuilding with facilities for athletes and spectators about two floors above ground and a third technical floor. The building is solved as barrier-free.
|
|
|
Office Building
Žák, Jan ; Burianová, Lenka (referee) ; Smolka, Radim (advisor)
The Master’s thesis Office building is compiled in the form of project documentation witch comprises all the requisites required by current regulations. The designed building is placed on the sites numbered 2589/1 in Litomerice. This is a new building withoutbasement with four floors. The house is rectangular in plan, built of precast reinforced concrete frame system with infill masonry and roofing flat roof monotube roofing.
|
|
|
University Residential Centre
Dvořák, Petr ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
University Residential Centre is the theme of this Master's thesis. The aim was to create a building, which will provide comfortable living and learning to students. The building has three floors - there are student apartments for one to four people in the upper two floors. The ground floor is dedicated to educational purposes. It contains a library and two lecture halls. From the constructional point of view, the structural system is a reinforced concrete skeleton. Main vertical elements are columns and main horizontal are two-way reinforced slabs. Utilization of glass facade and innovative type of thermal insulation can be found interesting.
|
|
|
Multifunctional building, Morasovice
Němec, Jan ; Kalánek, Jiří (referee) ; Kacálek, Petr (advisor)
In this project, there is processed complete documentation of a new multifunctional building, Morašovice. This project is solved as operative project. The house is a three story building, partly with a basement and with attic room, which is used. The house is bricked, partly with skeleton construction elements and with wooden saddle roof. This project of the multifunctional building is focused on architectonical solution and implementation into an existing rural area. This project solves relation between disposition and static, fire protection and energy savings. All blueprints are elaborated by ArchiCAD software.
|
|
|
Multifunctional building Pardubice
Dvořáková, Jana ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The Master thesis presents a design of the multifunctional building in City of Pardubice. The building has three functions: caffe house, administration and also housing. The building has four floor without basement and there is a level roof. I tis designed as a reinforced concrete frame and walls with ventilated fasade do not have a bearing function. Design of building mens the general technical requirements for the construction.
|
|
|
Multifunctional Building
Plachetský, Jiří ; Sláma, Ing Ludvík (referee) ; Mohelníková, Jitka (advisor)
Master’s thesis describes project documentation of a multifunctional house in Velké Meziříčí. It is the four storey basementless detached house. There are two shops, cafe and flat facilities on the first floor and 10 flats on the other 3 floors. The brick-built building consists of Diton and Heluz brickwork system insulated with Baumit external thermal insulation system. The house is covered by single ply roofing.
|
|
|
Administrative building of South Moravian Gasworks
Žwaková, Vendula ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The subject of this Master’s thesis was recalculation and design two variants of existing supporting steel structure storey administrative building which is located in the complex of Jihomoravská plynárenská a.s. in the city center of Brno. Dimensions and disposition based on the specifications of the Master‘s thesis. The total height of the structure is 29.46 m and circular platform has a diameter of 16.088 m. The supporting structure of an existing building consists of circumferential lattice structure. The main supporting elements of both variants are columns. Option A has 8 columns. Option B has 16 columns. These two variants were preliminarily designed and statically evaluated. After that was made a comparison of variants, and one was selected for more detailed processing (Option A). This included the calculation of anchorage, draft of mounting joints, technical report and drawing documentation.
|
|
|
Planetarium
Sokolová, Eva ; Šmak, Milan (referee) ; Barnat, Jan (advisor)
The master’s thesis object is to create a design of a load carrying steel structure planetarium. Its ground plan dimensions are 36,1 x 49,0 m. The planetarium hall’s roof is designed with system of trusses and purlins. The projection hall’s roof consists of ribbed cupola with radially arched ribs. The stiffness of the whole construction is ensured with bracings. The walls of the whole object are composed of columns, rails and bracings.
|
|
|
Program for inovation of the SORT control system
Šulc, Martin ; Kváš, Marek (referee) ; Zezulka, František (advisor)
The analysis for the extension of the control system and proposal of controlling program for surveillance cameras and related theoretical analysis necessary for understanding problems. Proposal communication protocol to access all functions via TCP/IP communication. Subsequent protocol implementation into control program and a programmable controller. Programming application with a user interface for camera control and basic image processing. The program also represents the server for TCP/IP communication with clients over the proposed protocol. The proposed application has to fulfill high pretensions of data streaming from cameras. Extension of the existing control system of the telescope, dome and other systems. The addition of analog measurement and control of digital inputs and outputs. Furthermore, control of stepper motors to control focusers. The embedded communication protocol will be expanded of the new instruction.
|
guest ::
