|
|
Centrifugal bucket hoist
Kotačka, Petr ; Malášek, Jiří (referee) ; Jonák, Martin (advisor)
This bachelor thesis deals with bucket elevator design for transport of dry, loose and non abrasive materials according to given parameters. In the introductory chapter a short search describes the concept of suggested solution. Functional calculation, designs and checks of individual proposed equipment elements are stated in the other chapters. In the design requirements for centrifugal bucket discharge as well as miscellaneous way of filling are preferred. Appropriate drawing documentation is enclosed with this thesis.
|
|
| |
|
|
The conception of tail unit arrangement on aircraft
Podhorský, Matěj ; Pejchar, Jan (referee) ; Píštěk, Antonín (advisor)
This bachelor thesis provides a basic overview of empennage layout designs. It contains a theoretical introduction explaining terms necessary to understand the empennage problematics. In the main part, the most frequent empennage layout designs are described, each one with a brief description of construction, its benefits and drawbacks and airplanes with such empennage layout design.
|
|
|
Construction of ultralight aircraft control
Marek, Ondřej ; Šplíchal, Jan (referee) ; Juračka, Jaroslav (advisor)
This bachelor thesis deals with control of ultralight glider D-14. Based on the research of applied construction solutions of ultralight airplanes I designed my own solution of the specific elements and construction nodes. Also, in accordance with the UL-2 directive load of main control systems are determined. 3D model of the glider fuselage with the elements of the particular assemblies is attached.
|
|
|
Laboratory exercises of mechanical elevator model
Arnošt, Petr ; Němec, Zdeněk (referee) ; Marada, Tomáš (advisor)
This bachelor´s thesis deals with design and manufacturing model of elevator. It contains information about management of this model with PLC Siemens, Simatic S7-200. Design was made on a computer in Inventor - 3D modeling program. Design of electronics was also made on computer in Eagle program. Model has movable cockpit, opening doors and signal and control elements. This thesis describes the design because of choice of specific decision. It deals with the production of individual components and management model.
|
|
|
Tail Units
Dula, Jan ; Mališ, Michal (referee) ; Urík, Tomáš (advisor)
In this bachelor´s thesis is created a survey of constructive solutions and lay-out of horizontal tail unit, solutions of horizontal stabilizer attachment and ways to control the elevator. In the introductory part the term which is used in this thesis are briefly explained. In the following part the possible configurations of the tail units are listed. From these configurations, some solutions are selected and they are closely classified. Any of these solutions provides a short description of the elevator control, the advantages and the disadvantages of this solution, an overview of selected horizontal stabilizer attachment and their detailed description.
|
|
|
Laboratory exercises of electronic elevator model
Kašpar, Ondřej ; Věchet, Stanislav (referee) ; Marada, Tomáš (advisor)
My Bachelor project is based on concept and realization of electronic model of elevator. This examplar works only on electric base without any mechanical components. This project at all will stay in laboratory of automatization. Students can use it as visual aid in studying and learning new things about programmable controller of Siemens, especially models S7-200. The movement of cabine of elevator is exemplified in bargraf, which you can leave control over then by active componets, LED drivers. The model is directed by micro-processor ALMEL ATmega128, which is connected with PC serial and paralel line. In my project you can find some descriptions of under consideration and used technologies, development system and constructional components.
|
|
| |
|
|
The Hotel
Jará, Andrea ; Zamazal, Radomír (referee) ; Donaťáková, Dagmar (advisor)
This bachelor thesis is about a hotel. It is located on large grounds close to the Brno reservoir. These grounds are built-up by many other buildings that are closely connected to the running of the hotel. This project is focused only on the hotel building. It is designed as a four-storeyed structure with one underground floor and three above ground floors. Two main entrances lead into the hotel. Two floors are housing premises with total count of 24 rooms. The ground floor is intended for reception desk and cafeteria. The underground floor consists of wellness centre and technical facilities. The roof is flat DOU and the building is designed to be built with ceramic blocs Porotherm
|
|
|
Warehouse management in selected company
STOLIČKA, Michal
The aim of thesis is to analyze warehouse management in selected company to find posibilities of optimalization. Selected company is Viscofan CZ s.r.o. in which is analyzed warehouse of colagen material called 4001. Based on consultation with employees of company is found problem that is solved in this thesis. It is method of material transport from warehouse to production building. The biggest problem of current way of transport is lenght of transport path because warehouse nad production are in saparate buildings and production machines are in aboveground floors. The best varinat from proposed posibilities is to build an elevator between both buildings. This leads to reduce transport route of material.
|
guest ::
