|
|
Study of the authenticity of spices and condiments
Štursa, Václav ; Golian, Jozef (referee) ; Urík, Martin (referee) ; Diviš, Pavel (advisor)
This disertation deals with geographical authentification of different types of spices and spice preparations. Investigated spice species were garlic (Allium sativum), ground pepper (Capsicum anuum), and dried carrot (Daucus carota). Theoretical part of the disertation describes main qualitative parameters of the examined species and production technology, means of food adulteration and statistic methods used in chemometrics. The aim of this dissertation was to verify the hypothesis whether it is possible to use targeted analytical techniques commonly used in quality control of spices and condiments, and statistical processing of measured data to distinguish samples of spices and condiments of different geographical origin. The use of non-targeted analysis was also investigated. Samples of garlic and ground pepper were used for targeted analysis. The examined parameters were dry matter and moisture of the sample, ash content, total phenolic content according to Folin-Ciocaulteu, carbohydrate content, alliin concentration, total nitrogen content, total color pigment (ASTA), pH of aqueous extract, total fat content, and concentration of selected elements (Ca, Cu, Fe, K, Mn, Mg, Na, P, Zn). The instrumental techniques used were molecular absorption spectrometry, inductively coupled plasma optical emission spectrometry and high performance liquid chromatography. The obtained data were statistically processed by analysis of variance (ANOVA) and principal component analysis (PCA). Using statistical analysis significant differences between samples that came from more distant areas were found. However, samples from closer areas could not be distinguished. The researched hypothesis could not be unequivocally confirmed or refuted. Metabolic fingerprint of carrot samples was determined using non-targeted analysis. Metabolic analysis was performed using the tandem LC-TOF-MS technique. The data were processed by recursive peak extraction (BRE) and subsequently uvaluated with PCA. The samples were divided into clusters according to their origin. Targeted and non-targeted techniques have great potential in verifying the geographical authenticity of different types of spices. However, the main condition is consistent and sufficient sampling, guaranteed information on the origin of the sample and obtaining a sufficient amount of input data for statistical analysis.
|
|
|
Characteristics of the different varieties of the Asimina triloba fruit
Maradová, Terezie ; Křikala, Jakub (referee) ; Diviš, Pavel (advisor)
This thesis describes pawpaw, fruit from east states of USA. Main part of this work is focused on nutritional characteristic of three species and their comparation. The analyzed species are PA Golden, NC-1 and Rebecca’s gold. Characteristic contains determination of lipids isolated by Soxhlet extraction, determination of proteins by Kjeldahl method, elemental analysis using ICP-OES, determination of saccharides and vitamin C by HPLC, determination of organic acids using IC and spectrofotometric analysis of phenolic compounds. This study shows, that pawpaw is interesting fruit, rich in nutritionally important compounds. That‘s why the cultivation and research of this fruit in South Moravia should continue in the future.
|
|
|
Beer bioflavouring by dry hopping using czech cultivars of hops
Gajdušek, Martin ; Štursa, Václav (referee) ; Pořízka, Jaromír (advisor)
This diploma thesis deals with the influence of dry hopping on selected analytical and sensory properties of beer. The effect of dry hopping was observed using Czech hop varieties Kazbek and Uran, which were added to the wort during the main fermentation phase in doses of 3 and 6 gdm-3. The contact time of hops with wort was 3, 6 and 9 days. The experimental part describes the technology of preparation of the reference beer, in which dry hopping were subsequently performed. A parallel measurement was performed on each sample. In terms of the basic parameters of beer, the effect of dry hopping, especially its length, on the ethanol content was observed. With a longer period of dry hopping, the concentration of ethanol in beer increased. The higher alcohol concentration was also associated with a decrease in the apparent extract. In terms of color and pH of beer, the effect of dry hopping has not been proven. Elemental analysis performed by optical emission spectrometry with inductively coupled plasma revealed an increase in the concentration of calcium, magnesium, and iron due to dry hopping. No statistically significant difference was observed for manganese and barium compared to the reference. In terms of bitterness, a significant increase was identified in dry hopped beers compared to the reference, the value being dependent on the dose of hops used. The effect of the hop variety has not been proved. Concentrations of organic acids determined by ion-exchange chromatography with a conductivity detector were affected by dry hopping only in the case of lactic acid and acetic acid. An increase in lactic acid was observed compared to the reference, also related to the degree of fermentation. While in the acetic acid content the hop samples showed a lower concentration than the reference sample. The concentrations of myrcene, humulene and geraniol were determined by gas chromatography with a mass detector. These are volatile components of hop essential oils. Dry hopped samples recorded significantly higher concentrations of all aromatic substances compared to the reference. In terms of hop time, the highest concentrations were shown by samples hopped for three days. The results of the sensory analysis show that the overall best rated sample is a sample hopped with the Kazbek variety with a dose of 3 gdm-3 for three days. Beer which was dry hopped for the shortest time also showed the lowest intensity of bitterness, which was perceived positively.
|
|
|
Elemental analysis of different kinds of small fruit
Štursa, Václav ; Vespalcová, Milena (referee) ; Diviš, Pavel (advisor)
This diploma thesis deals with the elemental analysis of soft fruit species such as currants and gooseberries. The theoretical part contains botanical description of both species, then description of nutritional properties of the individual analyzed elements and ends with a list of analytical methods suitable for elemental analysis in the food science and with a description of preparation. The experimental part deals with sample preparation and its analysis afterwards with spectroscopic techniques. Samples of different varieties of gooseberries, black, red and white currant from “Výzkumný a šlechtitelský ústav ovocnářský v Holovousích, s.r.o.” have been used for the analysis. Samples were mineralized in concentrated HNO3 and analyzed by ICP-OES technique. Difference in resultant concentrations of the analyzed elements (Ca, Cu, Fe, K, Mg, Mn, Na, P, Zn) between individual varieties were statistically compared by Tukey’s multiple comparison method and results achieved have been as well compared with the results reported in available literature.
|
|
|
The study of various methods of preparation of the milk sample for milk analysis by ICP-OES technique
Kaňová, Veronika ; Vítová, Eva (referee) ; Diviš, Pavel (advisor)
The theoretical part of the thesis deals with the chemical composition of cow’s milk, with the description of chosen methods of sample pretreatment and with the description of the used technique ICP-OES. The practical part is aimed at individual preparations of samples and at analysis of chosen chemical elements (Ca, Na, K and Mg). Milk is a really complicated polydisperse system, that’s the reason why the preparation of samples with milk is very important step before the measurement itself. In addition to accuracy choosing the sample adjustment method, other factors such as time, work intensity, or cost need to be considered when. In the thesis a comparison of four selected methods of sample preparation was made: direct analyse of milk, dilution with addition of Triton X-100, wet microwave ashing and destruction of matrix with TMAH (tetramethylammonium hydroxide). Selected elements were analysed with the help of ICP-OES. This diploma thesis builds on the bachelor thesis, which deals with the same problem. Final concentrations were compared with certified values of skimmed powdered milk. Data showed that the most accurate are methods of preparation of wet microwave ashing and destruction of matrix with TMAH. By using these methods, the effect of the dairy matrix that caused problems in the analysis, was largely eliminated. The diluted samples with and without Triton X-100 showed a bigger anomaly of measuring than the mineralization of wet ashing which came to the loss of analyte because of fat elements contained in milk.
|
|
|
Determination of micro and macro elements in bottled water by ICP-OES technique
Herman, Vít ; Vespalcová, Milena (referee) ; Diviš, Pavel (advisor)
This Master’s thesis deals with the determination of selected micro and macro elements in bottled water purchased in retail chains Czech Republic. There are described macro elements and micro elements that occur in the waters, bottled waters legislation and the most frequent used instrumental methods for elemental analysis. In this work for the analysis of bottled water were used methods optical emission spectrometry with inductively coupled plasma (ICP-OES) and ion chromatography (IC). Elemental composition of bottled water after analysis corresponded to the composition indicated on the labels, there were recorded only minor deviations from the reported concentrations. All bottled water meets the conditions of the legislation of the Czech Republic. The measured data were statistically processed in the XL Stat program and by multivariate data analysis was examined whether it is possible to individual bottled water from each other based on the analyzes differentiate, which can help in verifying the authenticity of bottled water and in the detection of adulteration of bottled water for profit.
|
|
|
Monitoring of the tin release to the canned fruit from the used packaging
Flajs, Roman ; Vránová, Dana (referee) ; Diviš, Pavel (advisor)
This master’s thesis deals with the issue of the release of tin in canned fruit of used packaging. The theoretical part of the thesis is described canning fruit as raw material, its composition, methods of preservation, basic technological operations fruit processing, manufacture of compote, manufacture of metal packaging, marches corrosive metal packaging, chemical behavior of tin in foods and toxicity, methods for the determination of tin in foods with a focus on optical emission spectrometry with inductively coupled plasma. I the experimental part of the thesis was first ICP-OES optimized before to analysis of the 20 different samples compote purchased in chain stores. Tin concentration was determined by a fixed proportion compote. Measured concentration of tin were compared with the maximum permissible value in canned foods, which is allowed by European legislation. The tin content in all analyzed compote did not exceed the legislative limit of 200 mg/kg. The highest concentration of tin has been measured in sample conserved apricots namely 88,6 ± 2,8 mg/kg.
|
|
|
Chemical composition of wine produced from PIWI cultivars
Michálková, Kateřina ; Vítová, Eva (referee) ; Pořízka, Jaromír (advisor)
This diploma thesis deasl with the chemical charakterization of wine from selected PIWI varieties. The theoretical part describes the general origin and reason for breeding PIWI varieties, a closer characterization of selected three PIWI varieties, Johaniter, Hibernal and Solaris. The next part is devoted to the description of analytical methods that were used to determine the chemical characteristics. The experimental part is developed to the determination of chemical characteristics, namely general characteristics such as alcohol, total phenols, phenolic substances, volatile substances and elemental composition. The results show that are differences between wines from selected PIWI varieties in therms of chemical composition. The most represented organic acid was in the range of 735,1-1286,2mg/l malic acid. This was followed by acetic in the range of 100-400mg/l. The antioxidant activity was determined in the range of 0,2988-0,9683 mmol/l of Trollox and content of total phenols 273,5-390,3mg/l. Of the phenolic substances, gallic acid was the most represented, ranging from 6,9-13,9mg/l. As another, abundant phenolic substances, catechin in the range of 1,6-6,0mg/l was detected. Of the determined elements, phosphorus in the range of 165,4-450,5mg/l was the most represented. Representatives of ethyl ester, ethyl acetate, decanoic acid ethyl acetate and hexanoic acid ethyl ester, were detected as the most abundant volatiles. From the measured data it was evident that wines from PIWI varieties different from standard varieties, especially in the profile of aromatic substances.
|
|
|
Determination of selected parameters in special types of beers brewed in the Czech Republic
Fähnrichová, Nikola ; Divišová, Radka (referee) ; Diviš, Pavel (advisor)
This bachelor thesis deals with analysis of special types of beer brewed in the Czech Republic using three instrumental methods. Polyphenols were determined by high performance liquid chromatography. To determine organic acids was used ion exchange chromatography. Elementary analysis was performed by inductively coupled plasma optical emission spectrometry. The theoretical part of the work describes technology of beer production, chemical composition of beer, especially groups of substances which were analysed in this thesis. Principle of used methods is also described. The practical part of the work deals with preparation of tested samples, calibration samples and process analysis. The obtained results of analysed substances are summarized in the tables, discussed and compared with results of analysis of other authors. For the analysis it was used eighteen different types of special beer produced in the Czech Republic.
|
|
|
Influence of coffee making process on chemical composition of brewed coffee
Trenzová, Kristina ; Divišová, Radka (referee) ; Diviš, Pavel (advisor)
This bachelor thesis deals with the influence of baristic coffee preparations on the chemical composition of the obtained beverage. Teoretical part of this thesis focuses on coffee growing, processing technology and the chemical composition of coffee beans. In the experimental part were measured samples of espresso coffee, samples prepared by moca pot, flip-drip method, filtrated coffee, samples prepared by french-press technique, vacuum pot samples and boiled coffee. The samples were prepared according to the baristic techniques at first and later with adjusted water and amount of coffee so these methods could be compared with each other. This work focuses on the determination of caffeine and acrylamide content by liquid chromatography, validation of HPLC method, determination of total phenolic content by Folin-Ciocalteu reagent, determination of organic acids by ion chromatography, determination of selected macro and micro elements by inductively coupled plasma in optical emission spectrometry and analysis of aromatic substances using gas chromatography. Based on the processed results and compared methods, it was shown that the moca pot had the greatest influence on the content of caffeine, acrylamide, organic acids and total phenolic substances, and the flip-drip with vacuum pot method had the greatest influence on the content of aromatic substances. From a baristic point of view the highest concentration of caffeine was 3689 mg/l in coffee based on flip-drip method, and concentration of acrylamide was 25,4 mg/l in the coffee based on the same method. The highest value of total phenolic content was determined in moka pot to c = 5,23 g/l. Regarding the mineral representation, the mineral decomposition of coffee beans and espresso were compared, and the highest values were reached by potassium, namely the concentration was 577 mg/l per 1 g of mineralized sample, in the cup of espresso the potassium concentration was 2461 mg/l. The highest content of organic acids was determined in the beverage prepared by moca pot, in terms of selected acids, the largest representation had the succinic acid with the concentration 599,8 mg/l. The highest content of aromatic substances was found in coffee from a moca pot and in coffee by flip-drip method. The biggest part was~made by furfuryl alcohol.
|
guest ::
