|
|
Study on the Mobility of Selected Representatives of Pharmaceuticals in Natural Systems
Bednárová, Paula ; Pořízka, Jaromír (referee) ; Kalina, Michal (advisor)
This diploma thesis focuses on interactions of chosen pharmaceuticals with soil and study their mobility. First part is devoted to the characteristics of the most common pharmaceuticals that appear in the environment, specifically antibacterial chemoterapeutics and analgetics. Subsequently, the occurrence of the pharmaceuticals in environment, their sources and effects are described. Further, the work focuses on soil components and soil organic matter. In conclusion of the theoretical part is the description of used analytical method for processing of the results and also the current state of the problematics. In the practical part of the thesis the experiments were made and analyzed and further served for better understanding of adsorption and interactions of chosen pharmaceuticals with soil and humin acids as the main reactive part of the soil.
|
|
|
The problems of fenol sorption from waste water
Židek, Michal ; Pavlovský,, Jiří (referee) ; Doležalová Weissmannová, Helena (advisor)
The bachelor work deals of sorption of phenol from waste water. In theoretical part the basic characteristic of phenol, their effects and presence in environmental compounds are described. The possibility of removal phenol from waste water in waste water treatment is also described. The adsorption process of removal phenol introduced too. The analysis current adsorbents using in removal phenol from aqueous solutions and characteristic properties are also presented in relation to materials on the base of clay minerals. The experimental part is focused on the possibility of removal phenol from aqueous solution via adsorption mechanism under various pH conditions.
|
|
|
Activated carbon adsorption
Vrána, Tomáš ; Dvořák, Radek (referee) ; Solodyankin, Kirill (advisor)
The objective of this bachelor’s thesis is the description of the Activated carbon adsorption. It’s here division activated carbon according to form and using. Further then description adsorption from fluent and from liquid phase on activated carbon. There are here reffered to factors influencing adsorption. At last chapter is comparing effectiveness adsorption near activated carbon, zenotil and silica gel.
|
|
|
Monitoring drug removal efficiency from water by selected adsorbents
Moravčíková, Světlana ; Talašová, Lucie (referee) ; Biela, Renata (advisor)
This diploma thesis deals with the efficiency of removal of pharmaceuticals from drinking water by selected adsorption materials. The first part describes sources of pharmaceuticals in drinking water and possible ways of contaminating water by pharmaceuticals. Subsequently, the pharmaceuticals most commonly found in the environment - nonsteroidal anti-inflammatory drugs, antibiotics, psychiatric drugs and sex hormones - are described in more detail. Next, the thesis describes the processes used for removal of pharmaceuticals. These are activated carbon adsorption, membrane processes and advanced oxidation processes. The last chapter of the theoretical part of the thesis deals with water treatment plants, where the technologies for removing drugs are already in operation. In the practical part of this thesis an experiment was performed and evaluated, for a purpose of comparing the efficiency of selected sorption materials in the removal of diclofenac from water. Filtrasorb F100, Bayoxide E33 and GEH were used.
|
|
|
Adsorption of natural organic matter (NOM) on granular activated carbon in the treatment of drinking water
Le Duc, Duy ; Mega, Jaroslav (referee) ; Dolejš, Petr (advisor)
In the first part of this thesis the methodic of lab trial was studied, which will be useful for studying adsorption of natural organic matter by activated carbon. As an optimal method of testing adsorption characters jar testing was chosen. Again as an indicator of organic contamination, it was decided to use permanganate chemical oxygen demand (in Czech CHSKMn) will be used. In the second part of this thesis the adsorption characters of eight types of granular activated carbon were studied. Those granular activated carbon came from two world produces, from company NORIT five type of granular activated carbon were tested: NORIT GAC 1020, NORIT PK 1-3, NORIT GAC 1240, NORIT ROW 0.8 SUPRA a TOD NORIT ROX 0.8 and from company Chemviron Carbon three types of granular activated carbon were tested: F100 FE11120A, F400 FE11210A a TL830 FE2028B. Batch kinetic tests of natural organic matter adsorption were conducted with all types of granular activated carbon at first. For description of sorption not only the batch kinetic tests and duration needed for setting equilibrium were observed, but also the process decreasing of concentration of natural organic matters to the value of equilibrium concentration known as adsorption equilibrium was followed.
|
|
|
Dehumidifier
Koštuřík, Adam ; Elcner, Jakub (referee) ; Hejčík, Jiří (advisor)
This bachelor thesis shall inform readers with the theory of humid air and its dehumidification at low temperatures. Here are the basic ways to dehumidify the air and then is selected a device that is suitable for low temperature conditions. Humidity problems in refrigerated areas are also described here.
|
|
|
Adsorption of microbial cells on model biological surfaces
Mikušová, Janka ; Krouská, Jitka (referee) ; Sedláček, Petr (advisor)
The aim of this bachelor thesis is creating sorption surface suitable for studying adsorption bacterial strain Lactobacillus rhamnosus, as representative probiotic bacterial strain. Included in the experimental part of this thesis was the process of creating sorption surface, according to the designed and especially optimized method. Optimization method comprised of preparing sorbent with sorption surface including mucin, on which was the bacterial strain Lactobacillus rhamnosus bound to, using specific interaction. UV-VIS spectrophotometry was utilized in the optimization of the sorption surface preparation for monitoring losses of mucin in solution that happens during the bondation on used substrate. Designed sorption surfaces were subjected to various physical-chemical analyses, which roles were displaying and characterisation of surface and confirming the presence of mucin. One of the major components, in the process of observing and characterization of changes in surface structure of the sorption surface, was infrared spectroscopy with Fourier transformation. Scanning electron microscopy was used for more detailed observation of the surface structure, created by adhesive interactions, which participate in probiotic bacteria adhesion. Finally, the created surfaces were used in pilot experiment, during which, the kinetics in growing bacterial culture with and without the presence of sorbent using microcalorimetry were observed. Designed sorbent appears to be a suitable mediator for detailed characterisation of bacterial adhesion, which is the first step in creating bacterial biofilm.
|
|
|
Selected drugs in drinking water sources and possibilities of their removal by adsorption
Lukášová, Daniela ; Ilavský,, Ján (referee) ; Kyncl, Miroslav (referee) ; Biela, Renata (advisor)
The dissertation deals with the occurrence of a selected group of drugs in drinking water sources and their subsequent removal. The work presents information on the occurrence of pharmaceuticals in the environment, their consumption in recent years and their division into different groups. Various options for waterworks processes that remove drugs from water are also described. For the experimental part of the dissertation, adsorption on selected sorption materials was chosen as the removal process. The removal of drugs from water was carried out in two ways, a static and a dynamic test. At the end of the work, the efficiency of sorption materials and other parameters related to adsorption are evaluated.
|
|
| |
|
|
Interactions between microplastics and heavy metals in the aquatic environment
Ottová, Michaela ; Pavlovský, Jiří (referee) ; Doležalová Weissmannová, Helena (advisor)
This diploma thesis deals with the adsorption of heavy metal ions on the microplastic. Specifically, lead, chromium, zinc, copper, mercury and polyethylene terephthalate was chosen as the plastic representative. Atomic absorption spectrometry (F-AAS, AMA) and FTIR with method ATR were used for the analysis. The aim of this work was to perform selected adsorption experiments, to determine the adsorption kinetics and the maximum amount adsorbed. Subsequently, the most suitable kinetic and isothermal model was determined for each element and the characteristic parameters were calculated.
|
guest ::
