|
|
The screw conveyor for transport of grain
Ondra, Martin ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the constructional solution of mobile screw conveyor, which will be used for transport of grain, specifically wheat. There are calculations of main dimensions, drive with the gear options and with solidity controls of screw conveyor in the project. The work also solves the control of the frame which enables tilt of machine and which is equipped with wheels for transportation. The drawing documentation is based on the technical report together with the 3D CAD documentation of screw conveyor.
|
|
|
Screw conveyor
Bořecký, Vítězslav ; Pokorný, Přemysl (referee) ; Jonák, Martin (advisor)
This thesis describes the design and construction of horizontal screw conveyor for transporting grain. This thesis involves calculation of the main dimensions of the conveyor, the design of the conveyor drive, saving proposal of worm conveyor and worm conveyor shaft strength check.
|
|
|
Horizontal screw conveyor
Švec, Milan ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
The focus of this bachelor thesis is construction, technical solution and design of a horizontal screw conveyor with purpose of transporting agricultural grain as per set parametres. The scope of this thesis includes calculations regarding the main parts of screw conveyor, designs of electric motor, clutch and bearings and a firmness check of the functional parts The body of the thesis is composed from a technical report and drawing documentation, supported by model assembly created in 3D CAD system, as well as a drawing of the entire device, a drawing of the screw and individual drawings of shafts.
|
|
|
Spiral conveyor
Sklenář, Jiří ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The content of this work is the theoretical description of the screw conveyors and the design of the structural solution of the spiral screw conveyor based on the specified parameters. Part of this work is drawing documentation based on basic calculated parameters.
|
|
|
Design of facility for egg-shells transportation
Hruška, Kryštof ; Naď, Martin (referee) ; Pernica, Marek (advisor)
Egg shells are a very suitable basic raw material for the production of mineral dietary supplements. The thesis deals with one of the processes in their production, the transportation of the commodity after flush into a clean room. The thesis proposes possible solutions, which are described in the research part, on the basis of which a screw conveyor is chosen as a suitable solution and a design solution is proposed. Based on the calculations, the individual parts of the conveyor are selected and designed. The entire device is modeled in SolidWorks and the drawing documentation contains the overall drawing of the assembly.
|
|
|
Cement worm conveyor
Šulc, David ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
This bachelor´s thesis contains of a detail and design of a sloping cement worm conveyor, based on specified parameters. This work deals with the calculation of the main conveyor parts, design size and strength of the control sections. Then there is also a solution method of storing a worm shaft. The thesis is composed of technical reports and drawings, which includes general assembly drawings, assembly drawing of the screw, and a list of items.
|
|
|
Design of vibratory feeder
Bezdíček, Petr ; Holub, Michal (referee) ; Pavlík, Jan (advisor)
The purpose of this bachelor thesis is to design and structurally process a solution of a vibratory feeder which task is to transport and sort the components. The component is a plastic funnel. The principle of vibratory feeders and conveyors and their current status of knowledge is decribed at the beginning. In the next part, some possible solutions to the problem are proposed, from which one is selected that satisfies the criteria the most . The whole design is constructed as a 3D model. There is also an analysis of possible risks and pricing of the design. Finally, the functionality of the designed machine is checked in the Rocky DEM program.
|
|
|
Screw conveyor
Kaňa, Vojtěch ; Pokorný, Přemysl (referee) ; Jonák, Martin (advisor)
This bachelor thesis deals with proposal tilted screw conveyor in term of calculation and construction solution of tilted screw conveyor for sludge transportation in waste water treatment plant. There is a calculation of the basic parameters, proposal of gearing, proposal of bearings and strength calculation of the main parts. In the attachment we can see drawing documentation.
|
|
|
Cast-in-place structure at sewerage plant
Hůrka, Jiří ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
The thesis is focused on the design and the assessment of horizontal supporting parts and concrete trough on the sewage pumping station in the Boskovice town. There are parts of thesis: technical report, static analysis, design documentation and visualizations. The technical report describes the proposed solution. Calculation of internal forces was performed by manual calculation and verified by the software RFEM. The design documentation consists of shape and reinforcements drawings of selected structural elements.
|
|
|
Reconstruction of the inlet channel to the turbine
Hanuš, Roman ; Perla, Jan (referee) ; Strnad, Jiří (advisor)
The subject of this bachelor's thesis is designing the reconstruction of the watercourse leading to the mill complex in the Bohumileč village in Northern Bohemia. A proposal for a new safety weir has been developed on the watercourse, connecting to the existing dam with its original weir in an unsatisfactory state. A diagnostic survey and assessment of the original reinforced concrete channel in the former mill building, which has been supplying water to the water turbine since 1914, have been conducted.
|
guest ::
