|
|
Data concentrator for data acquisition and wireless modules
Palacký, Tomáš ; Pásek, Jan (referee) ; Fiedler, Petr (advisor)
This master’s thesis deals with design and construction of a system for repote measurement of air quality in buildings. The first section provides a selection and analysis of used hardware and software components: minicomputer Raspberry Pi, STM32F401 microcontroller, communication module XBee-Pro, CO2 sensor and also communication interfaces IC and USART. The next section includes a design of electrical wiring, circuit board, configuration of the wireless modules and a software implementation for microcontroller and the concentrator.
|
|
|
Central Unit of the Wireless Sensors Network
Ptáček, Z.
This article deals with function and control description of wireless communication circuit nRF24L01+ and its possible use for the creation of local wireless sensor network of tree topology. Further is described function of sensor network and designes the central control unit for measured data collecting. Collected data are sent to computer and displayed to user. Finally there is considered possibility of powering modules by battery.
|
|
|
Wireless data collection form engine control units
Procházka, Miroslav ; Kejík, Petr (referee) ; Prokopec, Jan (advisor)
This thesis deals with implementation of a wireless interface for a module providing communication between computer and electronic control unit of an automobile. The 802.11 standard, wireless network structures and MAC sublayer were described. The thesis suggests selection of the most suitable WLAN module, testing of module's features used and the WLAN module implementation. Modifications for the next device version were developed and programs for device operation were implemented.
|
|
|
Digital room thermostat controlled via internet
Bača, Martin ; Fuchs, Michal (referee) ; Dvořák, Jiří (advisor)
This diploma thesis deals with the ideological design and realization of digital room thermostat and a temperature sensor selection. The device is designed as three units communicating wirelessly. Outdoor unit and control units sensor provide data for the control circuit of microcontroller ATmega16. Microcontroller choose the boiler operation based on senzor data. Thermostat can be remotely controled
|
|
|
Building control system
Nekula, Vít ; Valach, Soběslav (referee) ; Bradáč, Zdeněk (advisor)
The thesis is about designing a house control system which works as decentralized device. Initially, a brief market research in field of intelligent electro installation was made. On the basis of gained knowledge the whole concept of the system was designed – a control unit, a weather station and a temperature control unit. Each part communicates with each other wirelessly. A complete electronic design of circuit boards is a part of the thesis. The board were afterwards produced and assembled. Then a communication protocol and a complete implementation of all system functions were made. Next part of the thesis is a design and a programming of a web interface which is used to control the entire system. The final part of the thesis is about measuring a quality of communication between single units.
|
|
|
Wireless meteostation
Holain, Martin ; Macháň, Ladislav (referee) ; Háze, Jiří (advisor)
The objective of this thesis is a design of the amateurish wireless weather station which is used to measure temperature, relative humidity, barometric pressure and velocity and direction of air flow. Part of this thesis also describes design of a device intended for display, processing and storage of actual measured data obtained from weather station.
|
|
|
Wrireless electronic timekeeping with big LED display
Frydrych, Michal ; Macháň, Ladislav (referee) ; Jaroš, David (advisor)
This thesis deals with the design and realization of wireless electronic timer for fire sport. The first part of thesis provides an analysis of the given problems and all component parts of the system which are needed for time measurement in the fire sport. The principal aim of thesis was to create a wireless electronic timer for simultaneous measurement of up to four lanes. The designed measuring system is equipped with a large LED display to show the final time. Targets and starting pistols are wirelessly connected with the main unit of timer with using a communication platform IQRF. The whole device is structural designed to the handling was as simple as possible.
|
|
|
Wireless Communication in Mobile Robotics
Hricišin, Tomáš ; Burian, František (referee) ; Žalud, Luděk (advisor)
This work deals with the fundamental principles of wireless communications in mobile robotics. It introduces overview of the use of different frequency bands for wireless communications needs and control of mobile devices in Czech Republic. It also contains a brief overview of all applicable technologies and available modules that can be used for wireless communication. The theoretical part deals with some of the protocols that were used in the practical part of this work and the manner of wave propagation in buildings. The practical part consisted of a design of our own application to monitor and control the module Mikrotik Routerboard. With this application we have tested and compared two wireless cards of this module.
|
|
|
Net for communication in a company
Sychra, Jakub ; Vaněk, Jiří (referee) ; Špinka, Jiří (advisor)
This work deals with accessible communications technologies and their possible usage in firms. It is necessary to have a survey about types and trends of communications technologies at proposal of communications network. It is important to choose the combination that is suitable with its reliability, achievement and price.
|
|
|
Four legged walking robot
Fischer, Jan ; Krištůfková Dvorská, Jolana (referee) ; Neužil, Tomáš (advisor)
The object of this thesis is an analysis of the possibilities of a wireless communication and a sensor‘s equipment for a four legged walking robot. The thesis is divided into three parts. In the first part there is a particular sale’s exploration in the section of the wireless communication modules. It refers to the differences among technologies in the methods of signal transmission, the technical parameters but also in the communication protocols. The next part of this thesis is focused on sensor’s equipment with the accent on the possibility of use for a four legged walking robot. It contains a short listing of sensors, which are available in the Czech Republic with division based on the type of sensing magnitude. These two parts make a base for the last part where I have chosen suitable communication modules along with sensors and realization wireless data transfer including control and visualization. The result of this thesis is the complete communication block from the user to the robot.
|
guest ::
