|
|
Apartment building
Götthansová, Sylvie ; Párová, Jitka (referee) ; Rusinová, Marie (advisor)
A subject of bachelor thesis is a new apartment building and the processing of the design docu-mentation for construction. The apartment house is located on the outskirts of Olomouc. The surrounding area consists mainly of apartment buildings. The building is designed as a free-standing building with four above-ground floors and one basement. In the basement of the building there are cellars for each apartment unit, technical facilities of the building and a common room. There are 9 apartment units on the above ground floors. On the third and the fourth floor are designed maisonette apartments. Vertical supporting structures in the basement is made of concrete blocks, on the upper floors of ceramic blocks of THERM type. The ceilings are made as cast-in-place reinforced slabs. The roof is designed as a pitched roof.
|
|
|
Block of flats
Hanuláková, Mária ; Hrabovský, Kristián (referee) ; Benešová, Romana (advisor)
The goal of my bachelor´s thesis was to process the project documentation of the Rajhrad building,which is determined for living. Building is in Rajhrad city, in cadastral area of the city. Building is constructed as permanent build for living with 8 residental units located on 4 floors. The entire building has a basement on a slightly sloping terrain, while in the basement are store spaces designed for each apartment. 1st and 2nd are identical and they has 2+kk apartments and studio. At the 3rd floor is studio too, but there are 2 maisonette apartment, which continues to the 4th floor. A monolitic reinforced concrete stairs and personal elevator are conecting this floors. The entrance is on north side of the building. The building has wheelchair-accessible ramp. As a part of the project is parking lot for 18 cars, 2 of them are for limited mobility people. The construct system is a longitudinal wall, while basement walls are reinforced concrete and walls of the floors are made of porotherm ceramics bricks whith a thickness of 300mm, Inside load-bearing walls are porotherm 300mm thick, partitions are 140mm thick. Ceilings are made of ceramic beams and miako inserts. The staircase is a monolithic reinforced concrete double-arm. The structural height is 3.25m and the clear height is 2.9m. The entire building is insulated with the ETICS contact insulation system and covered with an impassable flat roof.
|
|
|
Nursing home Ivančice
Blümelová, Adéla ; Kalánek,, Jiří (referee) ; Ostrý, Milan (advisor)
The aim of the thesis is to design and develop project documentation for the new construction of a retirement home. The old age home is located on a piece of land in Ivančice. The building has been designed as a stand-alone building and is divided into two parts SO 01 and SO 02. Part SO 01 has three above-ground floors and a connecting corridor that has four above-ground floors belonging to it. This whole part has a basement. The operation of the laundry and kitchen is located in the basement, which also includes cleaning facilities, a garage, workshop, mortuary and technical facilities. In the first above-ground floor there is a dining room, doctor's office, offices, a cafe and a hairdresser. Rooms are located on the second and third floors. This section is tailored for clients with Alzheimer's disease and senile dementia. There are seven double rooms on each floor. Part So 02 has four above-ground floors without a basement. There are eight double rooms on each floor. Implementation documentation has been processed for only object So 01. The retirement home is based on reinforced concrete footings and belts. The structural system consists of reinforced concrete columns. The perimeter walls in the basement are reinforced concrete. On the above-ground floors, the outer shell is made of infill masonry of ceramic blocks of the THERM type. A reinforced concrete slab is designed as the ceiling structure. The staircase is one piece also made from reinforced concrete. The balcony slabs are prefabricated. The roof is flat. The building envelope is insulated with the ETICS contact insulation system.
|
|
|
Multifunctional building
Motl, Matěj ; Párová, Jitka (referee) ; Rusinová, Marie (advisor)
The proposed multi-functional object of this diploma thesis is located not far from Kraví hora, which is visited by tourists and sportsmen, near the FAST VUT school campus. The land with a total area of 4,000 m is situated in such a way that it is bordered by a road on the eastern and northern sides. Thanks to this, good traffic service is ensured. The building is located on the eastern side of this property. 2 slopes are built on the north side. One leads to the building's underground garage and the other to the above-ground parking lot. The capacity of the underground garage is 22+2 spaces, the capacity of the external parking lot is 9+2 spaces. The underground parking lot is also operationally connected to the building by an elevator and a staircase. The outside parking lot is connected by side entrances and a pedestrian walkway that leads to the main entrance. The main entrance to the building is located on the east side of the building. Due to the slope of the terrain, the difference in height is solved by a staircase and for people with limited mobility a side ramp. The newly created building has 5 floors. The already mentioned underground garages are located in the basement. On the first above-ground floor there is an entrance hall, hygiene facilities, a cafe, an exhibition gallery and an outdoor parking lot. On the second floor, there are offices, meeting rooms, sanitary facilities and a kitchen. On the 3rd floor there are offices, meeting rooms, sanitary facilities and a kitchen. The machine room of the air handling unit is located on the 4th floor. The building is designed as a frame reinforced concrete structure made of prefabricated parts. The cladding of the building is ensured by ground brick blocks and the ETICS contact insulation system. The vertical supporting elements are reinforced concrete columns, which are based on foundation footings. In the place of the staircase, a core of reinforced concrete monolithic wall is realized. Horizontal constructions consist of beams and girders. The ceiling structure consists of pre-stressed reinforced concrete ceiling panels. The roof structure is single-skinned, flat. The load-bearing structure of the roof consists of pre-stressed reinforced concrete ceiling panels.
|
|
|
Hotel Špindlerův Mlýn
Boulaouad, Hichem ; Picmaus, Petr (referee) ; Brukner, Bohuslav (advisor)
The subject of the diploma thesis is the project documentation developed at the construction stage for a new hotel with restaurant and wellness. The hotel is located in Špindlerův Mlýn and is designed as a stand-alone hotel. The hotel has two floors above ground, an attic and a basement. The floor plan of the hotel is designed in the shape of a cross with a penetrating rectangular annex over the basement and the first above-ground floor. The outbuilding is covered with a flat vegetated roof, and the main, highest mass is covered with a saddle-shaped and semi-hip-shaped sloping roof with a 40° slope of the roof plane. The layout of the hotel includes a collective garage and a wellness area in the basement, while the first floor has a restaurant, a congress room and an accommodation area with nine hotel rooms, two of which are wheelchair accessible. On the second floor above ground level and the attic there is only an accommodation area with two gyms, each of these two floors has nineteen hotel rooms. In total, the hotel offers accommodation for seventy-five people. Structurally, it is a building based on a foundation slab, the load-bearing vertical structures are a combination of reinforced concrete and masonry ground hollow bricks, the ceiling structures are made of reinforced concrete ceilings and the roof structure is made of a wooden purlin truss. The entire object is insulated with an insulation system.
|
|
|
Apartment building
Murínová, Bohuslava ; Hobzová, Klára (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor thesis is to elaborate project documentation for a residential building. It is located in Nový Bor. Construction site has a relatively flat profile. It has four above ground floors and one underground floor. Roof is flat green roof with a slope of 2,62 %. The whole construction is from reinforced concreate and mansonry with main use on construction materials from the company YTONG. The insulation materials are all from the company ISOVER. The drawing documentation necessary for the realization of this residential building was elaborated in Allplan computer program. Part of the work is fire, acoustic and thermal-technical solution.
|
|
|
Residence
Tippelt, David ; Skřek, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the new construction of the Rezidence apartment building. The proposed building is located in Brno, in the Slatina district, and is located on land that is protected by an agricultural land fund, so it will be necessary to remove it from the ZPF. This plot is not located in a flooded or mined area. It is a detached building, which has four floors above ground and one underground floor. In the new building there are 12 residential units of 3 + kk and 1 + kk. In the basement there is a cellar for each apartment. In the first half there is a bike shed / carriage house, a cleaning room and a workshop with a warehouse, in the second half there are two technical rooms and a warehouse. On the first floor there is an entrance to the building, a laundry room with a drying room, a gym for the inhabitants of the house and two 1 + kk apartment units. On the second and third floor 4 units of size 1 + kk and on the top floor 2 residential units of size 3 + kk. From the second floor, each apartment has a balcony. These apartments are designed primarily for students, couples, or even a starting family. Each floor is connected by a three-armed reinforced concrete staircase, which is complemented by an elevator. The house is based on reinforced concrete foundation strips in combination with lost formwork. The vertical load-bearing structures in the basement are made up of lost formwork, the load-bearing structures above the ground are made of ceramic blocks, which are insulated with a ventilated façade and equipped with a Bond SK1 façade sandwich cassette. The horizontal load-bearing structures form a semi-assembled Porotherm system. The whole building is covered by a single-skin vegetation-retention flat roof. The new apartment building is designed to be very economical.
|
|
|
Apartment building
Sedláková, Iveta ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of bachelor’s thesis is the elaboration of project documentation for a new construction of an apartment building in Havlíčkův Brod. The apartment building is designed as a three-storey building with a basement. There are 9 apartments on the upper floors. One od them is a barrier-free. In the basement there is a common house equipment aned collective garage. The apartments on the first floor have their own terrace and the apartments on the second and third floors have their own balcony. The vertical construcion system in the upper floors is brick. The basement is made of hydraulic concrete. The horizontal load-bearing structures are made of reinforced concrete ceiling slabs. The roofingv is designes as a single-skin flat green roof. The bachelor’s thesis contains project documentatin for the construction.
|
|
|
Apartment house Proluka in Olomouc
Přidal, Petr ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The task of the bachelor thesis was to process the documentation for the new apartment building with almost zero energy consumption. The apartment building is located in Olomouc, in a terraced development, in the gap site. The building is oriented to the northeast and southwest. The apartment building is designed as a basement with four floors. In the basement, there are three separate garages, storage rooms, and rooms for the technical operation of the building. A total of eight residential units are designed on the upper floors. Each apartment has a balcony or terrace. Barrier-free vertical transport is provided by an elevator located in the mirror of the staircase. The building is based on a reinforced concrete foundation slab. The vertical structures are made of sand-lime masonry. Horizontal load-bearing structures are reinforced concrete monolithic. The roof of the building is the gable. The apartment house is insulated with mineral wool insulation.
|
|
|
Apartment building
Hruboš, Michal ; Skřek, Daniel (referee) ; Fuciman, Ondřej (advisor)
This bachelor thesis deals with design of a four-storey partly basement apartment house. The building is located in the city of Krnov in the cadastral area of Krnov – Horní předměstí. The buidling is designed as a monofunctional and will be used for permanent housing. Except for the fourth floor, there are always three residential units on the floor with access to the loggia. On the fourth floor there are two residential units. In the basement of the building there are cellars for every unit, spaces for technical equipment of the building. The object is a regular rectangular shape with a cutout. The horizontal and vertical construction structures is made of the Porotherm system. The roofing of the building is solved by means of a single-skin flat roof. The bachelor thesis is prepared in the form of project documentation for building implementation.
|
guest ::
