|
|
Civil building
Chytilová, Pavlína ; Spáčilová, Jitka (referee) ; Spáčil, Miroslav (advisor)
This thesis deals with the design of a primary school for the 1st degree in Kromeriz. This is a set of 3 buildings. Object A is partially cellared, with 2nd floor above ground floor. In this building there is a boiler room with air conditioning, changing rooms, offices for school management and a dining room. Building B is an unsym basement 3rd floor building, which serves for the stay of pupils of the 1st-5th grade of the elementary school. Object C is unsymed, single-storey. It is a gym, changing rooms and sanitary facilities. This thesis solves object B, which is used for the stay of pupils of the 1st-5th grade of the primary school. The building is of irregular rectangular shape and is designed as a three-storey, unsymed. The structure consists of a skeleac structure. Linings of perimeter masonry made of ceramic blocks POROTHERM 30 Profi, based on concrete feet. The inner supporting masonry is made up of porotherm 25 AKU blocks. The inner non-supporting masonry is designed from POROTHERM 14 Profi blocks and POROTHERM 8 blocks. The insulation of the building is designed as a certified contact system. The horizontal supporting structure of the ceiling is solved by a cross reinforced ŽB plate. The staircases are ŽB monolithic. Roof structures are made up of flat roofs.
|
|
|
The new town hall of the city of Brno
Cinklová, Sára ; Obrtlík,, Jan (referee) ; Májek, Jan (advisor) ; Pěnčík, Jan (advisor)
The subject of this bachelor thesis is a design of the new Brno town hall. This project is based on the architectural study which was carried out within the course AG032 Ateliér architektonické tvorby II and is extended by the building permit documentation and the building implementation documentation. The area of interest is located in the Město-Brno district, between the Benešova and Koliště street. It is an office building with commercial units. It is a seven floor building with two underground floors. Underground floors are primarily used for parking. Part of the first floor is dedicated to rentable commercial units. The rest of the building is used as a municipality. The first two floors are accessible to the public. In the remaining floors are offices with limited public access. Individual departments are separated by floors or defined by the floor plan. The number of offices and their sizes are adjusted to the tectonic plan.
|
|
|
VUT - Reconstruction of the building A1-building and technological project
Stašová, Darina ; Venkrbec, Václav (referee) ; Henková, Svatava (advisor)
Subject of this diploma thesis is construction technology project of reconstruction of object A1, faculty of mechanical engineering, BUT in Brno. This diploma thesis contains technical report of construction site, construction site equipment project, time and financial plan, budget of one building object, technological study of the major technology stages, design of mechanical equipment, technological specifications and quality controlling inspections.
|
|
|
Mountain hotel
Vlček, Jan ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of this diploma thesis is to design a mountain hotel in the village Rokytnice nad Jizernou. The object is placed on a sloping plot located in an attractive touristic and skiing area of mountain range Krkonoše. The mountain hotel has 4 floors and a basement. In the First floor there is a restaurant with a terrace, kitchen and administrative facilities of hotel. In the second and third floor we can find guest rooms and room for the hotel staff. In the basement there is wellness, technical facilities and garage compound. Construction of building is made of the reinforced concrete monolithic transverse frames with beam filling of ceramic block.
|
|
|
Hotel with wellness
Jagoš, Ondřej ; Tichomirov,, Vladimír (referee) ; Novotný, Miloslav (advisor)
The topic of this thesis is a new-building of a hotel with a wellness centre. The building site is located in the cadastral area of Malenovice near Zlín, the city of Zlín, Zlín Region. It is the building consisting of three rectangles inserted into each other. The building is designed as a six-floor skeletal construction with a cellar made of reinforced concrete, roofed with flat roofs. In the first floor there is a reception, a restaurant with outside seating, wellness centre, and utility rooms. The second and the third floor are intended for accommodation of guests in the form of double rooms and apartments. In the fourth and fifth floors there are double rooms as well. Rooms for guests and apartments are situated to the southern and northern part. This residential space is mostly equipped with balconies stretching along the corners. In the last, sixth floor there can be found the management of the hotel, a conference room and a bar with terrace. The main entrance is situated to the northern part of the object. Outdoor parking places are also a part of the hotel. Exterior and interior of the hotel are designed in the conformity with current modern trends. The layout of the space is functional and basic. The dynamics of the building is supported by external holes in black colour and by the two-coloured facade in blue and grey colours. The hotel is meant for both active and passive relaxation, there is a possibility of accommodation of young couples, families with children, elderly people, individuals, and people with limited ability of movement. The hotel of designed with the focus on the comfort of guests. Therefore the leisure time space is a part of hotel. The comfortable space for relaxation within the object is provided by the wellness centre mentioned above, the bar with terrace, and an outdoor swimming pool. The disposition of the object is fastened by the reinforced concrete monolithic panels and by the feet placed under both inside and outside reinforc
|
|
|
Skeleton detached house
Studený, Marek ; Kovářová, Hana (referee) ; Sobotka, Jindřich (advisor)
The matter of the bachelor´s thesis is the new building of double-storey detached house in a local part of Kudlov the city of Zlin. The object is formed by reinforced concrete, prefabricated elements forming the skeleton structure. The supporting structure consists of continuous columns, beams, braces and all atypical sections. Ceiling, roof and foundation slab is designed from prestressed ceiling panels Spiroll. Building´s stair is from reinforced concrete, prefabricated. As the filler of peripheral walls and for realization of partition walls as well is used sand-lime bricks. The roof is flat, vegetation. The building has the shape of a cube and includes a built-in garage. The house is designed for housing a family of four. The main entrance and the entrance to garage is at the level of the first floor from the street Modra. The main living rooms are oriented to the southern side.
|
|
|
5-minutes neighbourhood
Šámalová, Daniela ; Glosová,, Dagmar (referee) ; Menšíková, Naděžda (advisor)
The assigned territory is situated in the City of Brno, in the city district of Židenice. From the west it is limited by the railway track Brno-Židenice, from the east by Koperníkova Street, from the north by Lazaretní Street and finally from the south by Bubeníčkova Street. Its area is approximately 45, 480 m2 which is 4,55 ha. From the urban perspective it is an intensive development in a separated block of the city with a protection zone. Total area is permeated by a few lines for pedestrians. The pedestrian zone provides better permeability of the area and better accessibility of the trade parterre. The buildings connect to surrounding development and respect the density of the integrity of the area. Intensive housing structure is regarded as "the city of short distance". The achievement of high density of housing development combines lots of various functions and relatively small built-up surface. While high-quality environment is preserved, people can find job oportunities in the intensive housing development without the need for transport. For achievement conception of compact city applies space urban planning. The shape of the estate directly impacted the principle of the proposal together with the city planning context of the current buildings. In the protective zone there is established a huge park with water reservoirs. The walk-through trade parterre is filled with many various functions, on its walkable roof is created a semi-public zone with skylights and freely introduced verdure. On the walkable roof there are independent blocks of apartments and public facilities. In the northern and southern corner are located public-service utilities and in the middle of this area there is a nursery and a kindergarden. In structural terms the building it is about cast-in-place concrete reinforced frame based on a white concrete foundation which has one underground level and five above-ground levels.
|
|
|
Diagnosis of reinforced concrete buildings with the system of elevated ceilings
Čeřovský, Martin ; Láník, Jaromír (referee) ; Žítt, Petr (advisor)
This thesis is focused on the diagnostics of reinforced concrete frame structures with the used system of elevated ceilings. The first part of the thesis is devoted to the issue of the methods of design and construction of these objects. The following chapter describes selected methods leading to determination of the material characteristics and to the specification of the constructional system. In its conclusion, the thesis deals with the appropriate design of implementation of the preliminary and detailed exploration of the structures with the used system of elevated ceilings.
|
|
|
Reinforced concrete skeleton construction
Ježek, Rostislav ; Matušíková, Anna (referee) ; Šulák, Pavel (advisor)
The bachelor thesis “Reinforced concrete skeleton construction” deals with the investigation of a department store supporting construction. The aim is to design and evaluate the ultimate limit state of reinforced concrete slabs over the first floor. The analysis of the locally supported slabs is performed by Scia Engineer 2012 software system. The method of the sum of the moments is used to verify the resulting values of internal forces. In addition, the ceiling structure is assessed for pushing through. A part of static calculation is the assessment of a reinforced concrete pillar and a foundation block. The work is accompanied by drawings.
|
|
|
Wellness Čeladná
Kozumplíková, Markéta ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The aim of this master thesis is to design a low-energy building for civic amenities, specifically the design of a recreational wellness centre. The building has an L-shaped floor plan with a flat roof and is designed with two above ground and one underground floor. The ground floor will serve as a wellness centre with a swimming pool and saunas. Massages and solariums are proposed on the 2nd floor. Technical facilities are located in the basement. The first part of the thesis is devoted to the architectural and structural design. Structurally, the building is divided into two parts. The part of the administrative facilities and the massage rooms consists of a construction of the character of a transverse wall system made of cut brick blocks and insulated with ETICS. The internal masonry is designed in ceramic ground bricks. Ceiling structures are in the form of continuous reinforced concrete slab. The building is based on footings and waist foundations. The roof of the building is single-skin flat with a gravel. The wellness part is made up of a monolithic diaphragm skeleton with high slenderness columns. The horizontal load-bearing structure in this case again consists of a continuous monolithic reinforced concrete slab. The second part of the thesis deals mainly with the environmental engineering of the buildings. The building will be heated by a pellet boiler and will also use energy from photovoltaic panels. Ventilation in the building is provided by air handling units with heat recovery. The third part of the thesis deals with the assessment of solar gains in the indoor environment of the pool hall. Three variants are proposed with multi-criteria evaluation and the optimal option is selected. The thesis is mainly elaborated in Archicad, Deksoft, MS Excel and Word software.
|
guest ::
