|
|
Punching technology
Králíček, Václav ; Harant, Martin (referee) ; Peterková, Eva (advisor)
The thesis is focused on punching technology, technology which can create complex-shaped parts from sheet metal. The thesis contains description of the principles of punching, emphasis is put punching tools and various production methods, which can be performed using modern punching machines. Part of this thesis is focused on comparison between punching technology and laser cutting. The comparison is shown on two different semi-finished products made from stainless steel by ACO Industries k.s. These semi-finished products are compared from the point of view of production accuracy and manufacture speed.
|
|
|
The Production Technology of unrotary part with flange
Přikryl, Zdeněk ; Hušek, Martin (referee) ; Císařová, Michaela (advisor)
Study describes application of forming technology for the production of unrotary parts with flange. The Study considers preliminary technology of forming processes in general. Further includes problems about drawing of unrotary parts with flange from singular to complex shaped. The next part of study includes evaluation of methods of the production belt gear shelter considering product criterias for series production and final accuracy and quality. Following part includes suggestion of the production technology of belt gear shelter using sheet metal forming. In the next parts of the study attends to accurate technological process elaboration of the components, to technological calculations and to project tool configuration. In conclusion the study includes technoeconomic evaluation of propřed technology production.
|
|
|
Laser cutting
Baran, Marek ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
The thesis elaborates cutting of thick sheet metal using the laser technology. Beside technological aspects of laser cutting, the project also deals with utilising laser technologies in practice and compares laser cutting to other ways of cutting sheet metal. The experimental part, which was realized in STEELTEC CZ, was concerned with optimization of focal point for cutting 20 mm sheet metal of S235JR. The samples which were cut on a CO2 laser were compared to samples made by plasma and water cutting machines. The researched parameters were roughness, shape, time and price.
|
|
|
Design of a tool for production of shaped blanks
Řáda, Aleš ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
Master thesis reports questions about purchasing supplies for stamping shop. It solves task, that is cheaper buy blanks, or buy coils and cut them in free time of Raster 250 press. Thesis contains a design of cutting tools for production rectangular and trapeze shaped blanks. Tool for cutting of rectangular blanks is documented with drawings of assembly and main parts. The project was verified in techno-economic summary including repayment time calculation.
|
|
|
Construction Project for Implementation of Apartment Building Prazakova
Staněk, Martin ; Venkrbec, Václav (referee) ; Nečasová, Barbora (advisor)
This master´s thesis solves processing of dokuments for realization of a new residental building on Pražákova in Brno. This thesis includes technical reports in individual chapters, a study of implementation of main technical stagesm project of construction site equpiment, traffic solution, a time and financial plan, a technological proscriptions, inspection and testing plans, occupational safety and health and an economic evaluation of machinery utilization.
|
|
|
Production of a part of the data projector bracket
Starý, Petr ; Štroner, Marek (referee) ; Podaný, Kamil (advisor)
The diploma thesis presents technology production design of a data projector bracket made of 2 mm thickness 11 321 steel plate. Considering the large production quantity and maximum tolerable deviations, a progressive die tool along with cutting and bending was chosen as the optimal solution for this type of production, based on a variant solution. Technological aspects were assessed, the production process was established, and technological and control calculations were performed. According to the total forming force of 2 000 kN, the LDC 250 mechanical press with a nominal force of 2 500 kN, manufactured in Šmeral Brno a.s., was chosen to meet the production requirements. The chosen material in a form of metal sheet coils will be supplied to the machine by a feeding device. The article will be manufactured in six steps. Based on technical-economic evaluation, the final price of a single piece in a series of 250 000 pieces per year was set at 30,80 Kč.
|
|
|
Punching technology
Králíček, Václav ; Harant, Martin (referee) ; Peterková, Eva (advisor)
The thesis is focused on punching technology, technology which can create complex-shaped parts from sheet metal. The thesis contains description of the principles of punching, emphasis is put punching tools and various production methods, which can be performed using modern punching machines. Part of this thesis is focused on comparison between punching technology and laser cutting. The comparison is shown on two different semi-finished products made from stainless steel by ACO Industries k.s. These semi-finished products are compared from the point of view of production accuracy and manufacture speed.
|
|
|
Manufacturing of the Body Part of an RC Helicopter
Kománek, Michal ; Císařová, Michaela (referee) ; Řiháček, Jan (advisor)
This thesis deals with the production of manufacturing of the body part of an RC helicopter, made from aluminium sheet with a thickness of 1 mm. Set production series is 200 000 pieces per year. After researching suitable production methods, the technology of progressive stamping was chosen. Based on theoretical knowledge has been design a production plan with the highest productivity. Technological and design calculations serving as a basis for tools and press selection are also an essential part.
|
|
|
Manufacturing of the Wall Bracket Bicycle
Sikora, Marek ; Císařová, Michaela (referee) ; Peterková, Eva (advisor)
This master’s thesis presents a proposal for the technology of manufacturing sheet metal part, which is a part of a bicycle wall bracket. The component is made of steel sheet ČSN 11 325 with subsequent surface treatment by galvanizing. Due to the chosen method of manufacturing with a progressive stamping die, the research part is focused on the technology of shearing and bending. Technological calculations were performed for the most suitable production variant, on the basis of which a mechanical press ANDRITZ Metals with the designation KSTU 2000-20-4G-PSE was chosen. Furthermore, the design of the tool itself is presented, which is substantiated by drawing documentation. At the end of the work, a technical and economic evaluation of the produced series of 300 000 workpieces per year is calculated.
|
|
|
Production of a part of the data projector bracket
Starý, Petr ; Štroner, Marek (referee) ; Podaný, Kamil (advisor)
The diploma thesis presents technology production design of a data projector bracket made of 2 mm thickness 11 321 steel plate. Considering the large production quantity and maximum tolerable deviations, a progressive die tool along with cutting and bending was chosen as the optimal solution for this type of production, based on a variant solution. Technological aspects were assessed, the production process was established, and technological and control calculations were performed. According to the total forming force of 2 000 kN, the LDC 250 mechanical press with a nominal force of 2 500 kN, manufactured in Šmeral Brno a.s., was chosen to meet the production requirements. The chosen material in a form of metal sheet coils will be supplied to the machine by a feeding device. The article will be manufactured in six steps. Based on technical-economic evaluation, the final price of a single piece in a series of 250 000 pieces per year was set at 30,80 Kč.
|
guest ::
