|
|
Multi-Storey Building with Atrium
Brodecký, Miroslav ; Buchta, Stanislav (referee) ; Barnat, Jan (advisor)
The diploma work deals with a design of a steel load-bearing structure for a multi-storey building with an atrium consisting of five above ground floors. The property is situated into Blansko area. Its ground-plan measures are 32.5 x 56 m. The maximum height of the property is 23.2 m. The height of the floor is 4 m. Load-bearing structure is designed with articulated joints. The atrium roof is formed from truss girders. The design and assessment is done according to rules in operation.
|
|
|
Business Centre
Dežerická, Lucia ; Pešek, Ondřej (referee) ; Pilgr, Milan (advisor)
This diploma thesis deals with the design and assessment of the two different variants of the steel structure of the business centre. The building is situated in Uherské Hradiště. The construction has several floors and the ground floor in the 1st floor is 32 x 32 m, it gradually extends evenly up in 2nd floor and 5th floor, to the total ground plan dimensions of 48 x 48 m. The building has 8 floors and its maximum construction height is 40 m. The supporting system of the structure is designed from S 355 steel, it consists of steel-concrete beams, dies and columns.
|
|
|
Shopping mall in Brno
Brozmanová, Dagmar ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
The aim of the diploma thesis is to design and assessment of the steel structure of shopping mall, which is situated in Brno. Three variants were processed, from which one was selected for more detailed processing. Variants have hexagonal floor plan with maximum dimension 60,0 m, four floors and same structural solution. They differ in plan of secondary beams and columns, in floor plan of glass atrium and used cross-sections. Building´s load-bearing structure consists of pin-supported columns, primary beams, secondary beams and purlins. Rigidity of the structure is enshured by system of vertical bracings and in horizontal direction by composite slab. The structure elements are made of steel S355, except secondary beams, which are made of steel S235.
|
|
|
Reinforced concrete structure warehouse
Vašina, Michal ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
Bachelor´s thesis deals with structural design and assessment of most loaded parts of cast-in-place concrete frame warehouse structure. Selected parts of structure are floor structures above first storey, more precisely joist slab and primary beam, which is part of inner main frame, also inner column and foundation pad under the designed column. Structural analysis was provided by computational software IDEA StatiCa, eventual results check is done by simplified hand calculation. Last part of thesis is formwork drawing designed parts of structure and reinforcement drawing of selected elements. The structure was assessed according to the ultimate limit states (ULS) and seviceability limit states (SLS). Assessment was provided according to valid standards.
|
|
|
Design of the reinforced-concrete structure of the production building
Vavřiníková, Denisa ; Vašátko, David (referee) ; Girgle, František (advisor)
The subject of this bachelor thesis is a proposal and assessment cast-in-place reinforced slab object manufacturing in three options. Frist option is a slab with beams and variable load 5 kN/m2. Second option with enlarged load 20 kN/m2. Floor slab in this geometry isn´t capable to transfer the load that is why third option is calculated. Third option is primary beams and added longitudinal secondary beams. The construction is proposed for ultimate limit state in compliance with ČSN EN 1992-1-1. To calculate the internal forces, three 3D modules were created in software SCIA Engineer. The result of this these are three structurals designes and drawnings.
|
|
|
Storage hall with administrative part
Žáček, Libor ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The subject of the bachelor's thesis is the design and assessment of the steel load-bearing structure of a storage hall with an administrative part. The proposed building is located in Uherské Hradiště. The floor plan of the building is 24 x 40 m and the height is 9.0 m. The main load-bearing structure is designed as a two-hinged frame made of rolled IPE profiles. The girders and axillars are designed from thin-walled profiles. The ceiling structure in the administrative part is designed as a composite concrete slab in trapezoidal sheet.
|
|
| |
|
|
Shopping mall in Brno
Brozmanová, Dagmar ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
The aim of the diploma thesis is to design and assessment of the steel structure of shopping mall, which is situated in Brno. Three variants were processed, from which one was selected for more detailed processing. Variants have hexagonal floor plan with maximum dimension 60,0 m, four floors and same structural solution. They differ in plan of secondary beams and columns, in floor plan of glass atrium and used cross-sections. Building´s load-bearing structure consists of pin-supported columns, primary beams, secondary beams and purlins. Rigidity of the structure is enshured by system of vertical bracings and in horizontal direction by composite slab. The structure elements are made of steel S355, except secondary beams, which are made of steel S235.
|
|
|
Multi-storey building for administrative purposes
Lehocký, Peter ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This bachelors thesis deals with design of administrative building adjacent to a metalworking shed. The administrative building is statically independent on metalwork shed. Building is located in Brno. Floor plan of building is in shape of letter L. Axis distance of columns is 9m longitudinal and 7,5m transverse. Total length of building is 27m longitudinal and 15m transverse ( distance is measured between axis of columns). In narrow part of transverse is width of the building 7,5m. Ceiling is made of composite steel-concrete structure. Height of the building is 18,7m.
|
|
|
Reinforced concrete structure warehouse
Vašina, Michal ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
Bachelor´s thesis deals with structural design and assessment of most loaded parts of cast-in-place concrete frame warehouse structure. Selected parts of structure are floor structures above first storey, more precisely joist slab and primary beam, which is part of inner main frame, also inner column and foundation pad under the designed column. Structural analysis was provided by computational software IDEA StatiCa, eventual results check is done by simplified hand calculation. Last part of thesis is formwork drawing designed parts of structure and reinforcement drawing of selected elements. The structure was assessed according to the ultimate limit states (ULS) and seviceability limit states (SLS). Assessment was provided according to valid standards.
|
guest ::
